In this review, we will be comparing A3 2027 and 802 D5, two Passive Floor-standing speakers from Magico and Bowers Wilkins.
Let's have a brief look at the main features
of Magico A3 2027 and Bowers & Wilkins 802 D5 first before getting into our more
detailed comparison.
| Key Specs | Magico A3 2027 | Bowers & Wilkins 802 D5 |
|---|
| Brand | Magico United States · founded 2004 | Bowers Wilkins United Kingdom · founded 1966 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 1.1" Dome | 1" Diamond dome |
|---|
| Midrange | 5" | 6" |
|---|
| Woofer | 2 x 7" Nano-Tec, aluminium-honeycomb core with carbon-fibre skins | 2 x 8" Aerofoil |
|---|
| Frequency response | 25-50k Hz | 17-28k Hz |
|---|
| Sensitivity | 87 dB | 90 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 50-300 watts | 50-1000 watts |
|---|
| Weight | 59.40kg / 130.7lbs | 91.40kg / 201.1lbs |
|---|
| Dimensions (H x W x D) | 43-1/8" x 9-1/4" x 11" 1095.0 x 235.0 x 280.0mm | 47-15/16" x 16-1/4" x 23-3/16" 1218.0 x 413.0 x 589.0mm |
|---|
What size room are the Magico A3 2027 and Bowers & Wilkins 802 D5 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Magico A3 2027 |
Bowers & Wilkins 802 D5 |
| Near-field |
Bad |
Are you nuts? |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both A3 2027 and 802 D5 are 3-way speakers.
Magico A3 2027Bowers & Wilkins 802 D5
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Magico A3 2027 |
Bowers & Wilkins 802 D5 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
1 x 5-inch |
1 x 6-inch |
|
Woofer
|
2 x 7-inch
|
2 x 8-inch
|
A3 2027 features a 1.1" Beryllium Dome Tweeter, a 5" Midrange and 2 x 7" Nano-Tec, aluminium-honeycomb core with carbon-fibre skins Woofer. On the other hand, the 802 D5 features a 1" Diamond Diamond dome Tweeter, a 6" Midrange and 2 x 8" Aerofoil Woofer.
Frequency Response
A3 2027 has a frequency range of 25-50k Hz whereas 802 D5 has a frequency range of 17-28k Hz. With a minimum frequency of 17Hz, the 802 D5 can go significantly deeper on the low side and provide stronger bass compared to the A3 2027's min frequency of 25Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Impedance and Sensitivity
A3 2027 is a 4 ohms speaker compared to the 802 D5 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the A3 2027 can provide this impedance level.
These two speakers also have different sensitivity levels. A3 2027 sensitivity is rated at 87 dB and the 802 D5's is rated at 90 dB. This 3 dB difference makes the Bowers & Wilkins 802 D5 a more sensitive speaker compared to Magico A3 2027, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
802 D5 can handle a max power of 1000 watts RMS, whereas A3 2027 has a max power handling value of 300 watts RMS, 700 watts less than the 802 D5.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
802 D5 features Binding post posts which make bi-amping or bi-wiring possible. A3 2027 has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Magico A3 2027's and Bowers & Wilkins 802 D5's external dimensions. Magico A3 2027 has external dimensions of 1095.0 x 235.0 x 280.0mm (43-1/8 x 9-1/4 x 11inch) whereas Bowers & Wilkins 802 D5 has external dimensions of 1218.0 x 413.0 x 589.0mm (47-15/16 x 16-1/4 x 23-3/16inch).
Bowers & Wilkins 802 D5 is clearly the larger of the two speakers. Its body is 178mm wider, 123mm taller and 309mm deeper than Magico A3 2027.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Bowers & Wilkins 802 D5 needs about 270% more floor or shelf area. Bowers & Wilkins 802 D5 is 309mm deeper, so it stands that much further out from the wall. Bowers & Wilkins 802 D5 is 123mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Magico A3 2027 is approximately 658.0cm2 / 102.0inch2 and base area of the Bowers & Wilkins 802 D5 is approximately 2432.6cm2 / 377.1inch2. The A3 2027 requires 73% less surface area than the 802 D5 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Magico A3 2027 weighs 59.40kg / 130.7lbs and the Bowers & Wilkins 802 D5 weighs 91.40kg / 201.1lbs. This makes the 802 D5 54% heavier than the A3 2027.
Here is a comparison of how A3 2027 and 802 D5's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
High Frequency Response |
50k Hz
vs
28k Hz
|
Generates higher frequency |
Height |
1095mm
vs
1218mm
|
Easier to fit in smaller spaces |
Base Surface Area |
658cm2
vs
2432cm2
|
Takes less floor space |
Price per pair* |
25000USD
vs
45000USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
1000 watts
vs
300 watts
|
Handle more power from your amplifier |
Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
8 inches
vs
7 inches
|
Larger woofer |
Low Frequency Response |
17 Hz
vs
25 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
| General |
Magico A3 2027 |
Bowers & Wilkins 802 D5 |
| Brand |
Magico |
Bowers Wilkins |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
50-1000 watts |
| Sensitivity |
87 dB |
90 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
n/a |
3.3 ohms |
| Frequency Response |
25-50k Hz |
17-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
7" |
8" |
| Woofer Composition |
Nano-Tec, aluminium-honeycomb core with carbon-fibre skins |
Aerofoil |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
Dome |
Diamond dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5" |
6" |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1095.0mm (43.1") |
1218.0mm (48") |
| Width |
235.0mm (9.3") |
413.0mm (16.3") |
| Depth |
280.0mm (11") |
589.0mm (23.2") |
| Weight |
59.40kg (130.7lbs) |
91.40kg (201.1lbs) |
| Enclosure |
Sealed |
Bass Reflex |
| Available Colors |
Black, Silver, Red, Blue (bead-blasted anodised aluminium) |
n/a |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - Bowers & Wilkins 802 D5 costs roughly 1.8x what Magico A3 2027 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | Bowers & Wilkins 802 D5 digs deeper - 17Hz against 25Hz. A subwoofer would even that out. |
| Amplifier needs | B | Bowers & Wilkins 802 D5 is more sensitive (90dB vs 87dB), so it goes louder on the same amplifier. |
| Amplifier match | B | Bowers & Wilkins 802 D5 is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | B | Bowers & Wilkins 802 D5 takes more power (1000W vs 300W) - more in hand in a big room. |
| Size | depends | Magico A3 2027 is easier to place; Bowers & Wilkins 802 D5 is bigger, which usually goes with fuller bass. Your room decides. |
| Cabinet | depends | Sealed vs Ported. Sealed is tighter and happier near a wall; ported digs lower but wants space behind it. |
| Expandability | B | Bowers & Wilkins 802 D5: bi-amping. Bowers & Wilkins 802 D5 sits in a wider range (7 models), so a matched surround system is easier later. |
| Price | A | Magico A3 2027 is cheaper - $25,000 against $45,000, about 44% less; arguably a different class. |
A Magico A3 2027 B Bowers & Wilkins 802 D5
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Bowers & Wilkins 802 D5 measures better, Magico A3 2027 costs about about 80% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 25Hz anyway, which makes the cheaper Magico A3 2027 much easier to justify. Match it to your room: we rate Bowers & Wilkins 802 D5 the better fit for a very large room; elsewhere the two are rated the same.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.