In this review, we will be comparing The Fives and LS50 Wireless, two Powered Bookshelf speakers from Klipsch and KEF. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Klipsch The Fives and KEF LS50 Wireless first before getting into our more
detailed comparison.
Klipsch The Fives Key Specs
- 2-way Design
- 160-watt RMS( 320-watt Peak) Integrated Amplifier
- 1" Tractrix Horn Tweeter
- 4.5" Fiber-composite Woofer
- 50-25k Hz Frequency Response
- 24-bit Max Depth / 192 kHz Max Sample Rate
- Built-in 5.0 Bluetooth
- App Control Feature
- Weight:4.85kg
- Dimensions (H x W x D): 314.3" x 6.5" x 11.125"( 314.3 x 165.1 x 282.6mm )
KEF LS50 Wireless Key Specs
- 2-way Design
- 230-watt RMS Integrated Amplifier
- 11th Generation Uni-Q Driver
- 1" Hard-Dome Tweeter
- 5.25" Magnesium/aluminum alloy Woofer
- 79-28k Hz Frequency Response
- 24-bit Max Depth / 192 kHz Max Sample Rate
- Built-in 4.0 Bluetooth
- App Control Feature
- Weight:10.00kg
- Dimensions (H x W x D): 301.6" x 7.875" x 13.25"( 301.6 x 200.0 x 336.5mm )
In the following sections, we will get into more detail in order to better understand how the Klipsch The Fives and KEF LS50 Wireless compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both The Fives and LS50 Wireless are 2-way speakers.
| Driver |
Klipsch The Fives |
KEF LS50 Wireless |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4.5-inch
|
1 x 5.25-inch
|
The Fives features a 1" Titanium Tractrix Horn Tweeter and 1 x 4.5" Fiber-composite Woofer . On the other hand, the LS50 Wireless features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Magnesium/aluminum alloy Woofer .
Frequency Response
The Fives has a frequency range of 50-25k Hz whereas LS50 Wireless has a frequency range of 79-28k Hz. With a minimum frequency of 50Hz, the The Fives can go significantly deeper on the low side and provide stronger bass compared to the LS50 Wireless's min frequency of 79Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both The Fives and LS50 Wireless have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch The Fives's and KEF LS50 Wireless's external dimensions. Klipsch The Fives has external dimensions of 314.3 x 165.1 x 282.6mm ( 12.375 x 6.5 x 11.125inch) whereas KEF LS50 Wireless has external dimensions of 301.6 x 200.0 x 336.5mm ( 11.875 x 7.875 x 13.25inch) .
Klipsch The Fives is 34.9mm narrower and 53.9mm less deeper than KEF LS50 Wireless but it is also 12.7mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch The Fives is approximately 466.6cm2 / 72.3inch2 and base area of the KEF LS50 Wireless is approximately 673.0cm2 / 104.3inch2. The The Fives requires 31% less surface area than the LS50 Wireless which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch The Fives weighs 4.85kg / 10.7lbs and the KEF LS50 Wireless weighs 10.00kg / 22lbs. This makes the LS50 Wireless 106% heavier than the The Fives.
Here is a comparison of how The Fives and LS50 Wireless's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch The Fives?
Here are the items that are included inside the box of The Fives:
Powered speaker (right) Passive speaker (left) 6-inch AC power cord 13-feet Proprietary speaker cable 58-inch HDMI cable 59-inch USB-A to USB-B cable Remote control 2 AAA batteries Instruction Booklet Need Help? card
What's in the Box of KEF LS50 Wireless?
Here are the items that come with the LS50 Wireless:
Wireless powered speaker (Right)Wireless powered speaker (Left)Two 6.5-feet AC power cords10-feet Cat-6 interconnect speaker cable6.5-feet USB-B to USB-A cable42