In this review, we will be comparing RP-600C and RC-64 III, two Passive Center Channel speakers by Klipsch Let's have a brief look at the main features
of Klipsch RP-600C and Klipsch RC-64 III first before getting into our more
detailed comparison.
What size room are the Klipsch RP-600C and Klipsch RC-64 III speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-600C and Klipsch RC-64 III compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-600C and RC-64 III are 2-way speakers.
| Driver |
Klipsch RP-600C |
Klipsch RC-64 III |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-3/4-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
4 x 6.5-inch
|
RP-600C features a 1" titanium Tractrix horn dome Tweeter and 2 x 6.5" Cerametallic cone Woofer . On the other hand, the RC-64 III features a 1-3/4" titanium Tractrix horn Tweeter and 4 x 6.5" Cerametallic cone Woofer .
Frequency Response
RP-600C has a frequency range of 58-25k Hz whereas RC-64 III has a frequency range of 57-24k Hz. With a minimum frequency of 57Hz, the RC-64 III can go slightly deeper then the RP-600C's min frequency of 58Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-600C and RC-64 III have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-600C sensitivity is rated at 97 dB and the RC-64 III's is at 99 dB. This 2 dB difference makes the Klipsch RC-64 III a more sensitive speaker compared to Klipsch RP-600C, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-600C can handle a max power of 200 watts RMS from the amp the whereas RP-600C has a max power handling value of 125 watts RMS , 75 watts less than the RC-64 III.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RC-64 III features Binding post posts which make bi-amping or bi-wiring possible. RP-600C has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-600C's Binding post terminals
Klipsch RC-64 III's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600C's and Klipsch RC-64 III's external dimensions. Klipsch RP-600C has external dimensions of 204.0 x 558.0 x 308.0mm ( 8 x 21-15/16 x 12-1/8inch) whereas Klipsch RC-64 III has external dimensions of 204.0 x 909.0 x 388.0mm ( 8 x 35-3/4 x 15-1/4inch) .
Klipsch RP-600C is 351mm narrower and 80mm less deeper than Klipsch RP-600C but they have the same height of 204.0mm.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-600C is approximately 1718.6cm2 / 266.4inch2 and base area of the Klipsch RC-64 III is approximately 3526.9cm2 / 546.7inch2. The RP-600C requires 51% less surface area than the RC-64 III which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-600C weighs 10.91kg / 24lbs and the Klipsch RC-64 III weighs 25.00kg / 55lbs. This makes the RC-64 III 129% heavier than the RP-600C.
Here is a comparison of how RP-600C and RC-64 III's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Klipsch RP-600C?
Here are the items that are included inside the box of RP-600C:
Center channel loudspeakerGrille (installed)4 Self-adhesive rubber feetPlastic tipped bolt (w/ attached nut)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RC-64 III?
Here are the items that come with the RC-64 III:
Center channel loudspeakerGrille6 Self-adhesive rubber feet2 Jumpers (pre-installed)Owners Manual
 High Frequency Response |
25k Hz
vs
24k Hz
|
Generates higher frequency |
 Base Surface Area |
1718cm2 (558x308mm)
vs
3526cm2 (909x388mm)
|
Takes less floor space |
 Price per pair* |
499USD
vs
1829USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
200 watts
vs
125 watts
|
Handle more power from your amplifier |
 Sensitivity |
99 dB
vs
97 dB
|
Play louder with same amount of amplification power |
 Number of Woofers |
4
vs
2
|
More woofers |
| Low Frequency Response |
57 Hz
vs
58 Hz
|
Generates deeper bass |
| General |
Klipsch Reference Premiere RP-600C |
Klipsch RC-64 III |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
up to 125 watts |
up to 200 watts |
| Sensitivity |
97 dB |
99 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
58-25k Hz |
57-24k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
4 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Cerametallic cone |
Cerametallic cone |
| Woofer Surround Material |
Rubber |
n/a |
| Tweeter Size |
1" |
1-3/4" |
| Tweeter Type |
Tractrix horn dome |
Tractrix horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
N/A" |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
204.0mm (8") |
204.0mm (8") |
| Width |
558.0mm (22") |
909.0mm (35.8") |
| Depth |
308.0mm (12.1") |
388.0mm (15.3") |
| Weight |
10.91kg (24lbs) |
25.00kg (55lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Finish |
MDF/Wood-grain vinyl |
furniture grade veneer |
| Available Colors |
Walnut, Black |
Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |