In this review, we will be comparing RP-504C II and Evoke 25C, two Passive Center Channel speakers from Klipsch and Dynaudio. Let's have a brief look at the main features
of Klipsch RP-504C II and Dynaudio Evoke 25C first before getting into our more
detailed comparison.
What size room are the Klipsch RP-504C II and Dynaudio Evoke 25C speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-504C II and Dynaudio Evoke 25C compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-504C II and Evoke 25C are 2-way speakers.
| Driver |
Klipsch RP-504C II |
Dynaudio Evoke 25C |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 5.25-inch
|
2 x 5.5-inch
|
RP-504C II features a 1" titanium Tractrix Horn Tweeter and 4 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1950 Hz. On the other hand, the Evoke 25C features a 1.1" Cerotar coated silk soft-dome Tweeter and 2 x 5.5" Esotec+ MSP Woofer with a Crossover frequency at 1200 and 2300Hz.
Frequency Response
RP-504C II has a frequency range of 50-25k Hz whereas Evoke 25C has a frequency range of 50-23k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-504C II is a 8 ohms speaker compared to the Evoke 25C which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. RP-504C II sensitivity is rated at 96 dB and the Evoke 25C's is rated at 88 dB. This 8 dB difference makes the Klipsch RP-504C II a more sensitive speaker compared to Dynaudio Evoke 25C, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-504C II can handle a max power of 200 watts RMS from the amp the whereas RP-504C II has a max power handling value of 150 watts RMS , 50 watts less than the Evoke 25C.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-504C II features Binding post type posts and Evoke 25C has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch RP-504C II's Binding post terminals
Dynaudio Evoke 25C's Binding post terminals
Cabinet Type and Port Position
Both RP-504C II and Evoke 25C have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-504C II's and Dynaudio Evoke 25C's external dimensions. Klipsch RP-504C II has external dimensions of 177.0 x 818.0 x 385.0mm ( 6-15/16 x 32-3/16 x 15-1/8inch) whereas Dynaudio Evoke 25C has external dimensions of 183.0 x 602.0 x 281.0mm ( 7-3/16 x 23-11/16 x 11-1/16inch) .
Dynaudio Evoke 25C is 216mm narrower and 104mm less deeper than Klipsch RP-504C II but it is also 6mm taller.
Below you can see the front view size comparison of Klipsch RP-504C II and Dynaudio Evoke 25C in scale.
Comparison image of Klipsch RP-504C II and Dynaudio Evoke 25C Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-504C II is approximately 3149.3cm2 / 488.1inch2 and base area of the Dynaudio Evoke 25C is approximately 1691.6cm2 / 262.2inch2. The RP-504C II requires 86% more surface area than the Evoke 25C which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-504C II weighs 16.50kg / 36.3lbs and the Dynaudio Evoke 25C weighs 11.82kg / 26lbs. This makes the RP-504C II 40% heavier than the Evoke 25C.
Here is a comparison of how RP-504C II and Evoke 25C's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Klipsch RP-504C II?
Here are the items that are included inside the box of RP-504C II:
Center channel loudspeakerGrilleUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Dynaudio Evoke 25C?
Here are the items that come with the Evoke 25C:
Center-channel loudspeakerGrille2 Foam port plugsTweeter protection cover (pre-installed)Instructions for UseImportant Safety InstructionsWarranty Card
 Sensitivity |
96 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Number of Woofers |
4
vs
2
|
More woofers |
 High Frequency Response |
25k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
177mm
vs
183mm
|
Easier to fit in smaller spaces |
 Price per pair* |
799USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
| Woofer Size |
5.5 inches
vs
5.25 inches
|
Larger woofer |
 Base Surface Area |
1691cm2 (602x281mm)
vs
3149cm2 (818x385mm)
|
Takes less floor space |
| General |
Klipsch Reference Premiere RP-504C II |
Dynaudio Evoke 25C |
| Brand |
Klipsch |
Dynaudio |
| Speaker Type |
Center channel speaker |
Center channel speaker (Blonde) |
| Power Range |
up to 150 watts |
up to 200 watts |
| Sensitivity |
96 dB |
88 dB |
| Impedance |
8 ohms |
6 ohms |
| Frequency Response |
50-25k Hz |
50-23k Hz |
Drivers |
|
|
| Woofer Quantity |
4 |
2 |
| Woofer Size |
5.25" |
5.5" |
| Woofer Composition |
Cerametallic cone |
Esotec+ MSP |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.1" |
| Tweeter Type |
Tractrix Horn |
soft-dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1950 Hz |
1200 and 2300Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
177.0mm (7") |
183.0mm (7.2") |
| Width |
818.0mm (32.2") |
602.0mm (23.7") |
| Depth |
385.0mm (15.2") |
281.0mm (11.1") |
| Weight |
16.50kg (36.3lbs) |
11.82kg (26lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood veneer |
| Available Colors |
Walnut, Black |
Oak (blonde) |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years (8 Years registered) |
| Labor Warranty |
5 Years |
5 Years (8 Years registered) |