In this review, we will be comparing R-5650-S II and 100 IW 6, two Passive In-wall speakers from Klipsch and Focal. Let's have a brief look at the main features
of Klipsch R-5650-S II and Focal 100 IW 6 first before getting into our more
detailed comparison.
Klipsch R-5650-S II Key Specs
- 2-way Design
- 1" Horn-loaded dome Tweeter
- 6.5" Cerametallic Woofer
- 60-23kHz Frequency Response
- 92 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 50watts
- Dimensions (H x W x D): 331.0" x 8.0000" x 3.6875"( 331.0 x 204.0 x 94.0mm )
Focal 100 IW 6 Key Specs
- 2-way Design
- 1" Inverted Hard-Dome Tweeter
- 6.5" Polyglass Woofer
- 60-23kHz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-120watts
- Dimensions (H x W x D): 274.0" x 6.6250" x 3.3750"( 274.0 x 169.0 x 86.0mm )
What size room are the Klipsch R-5650-S II and Focal 100 IW 6 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Klipsch R-5650-S II |
Focal 100 IW 6 |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch R-5650-S II and Focal 100 IW 6 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-5650-S II and 100 IW 6 are 2-way speakers.
| Driver |
Klipsch R-5650-S II |
Focal 100 IW 6 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
R-5650-S II features a 1" Horn-loaded dome Tweeter and 1 x 6.5" Cerametallic Woofer . On the other hand, the 100 IW 6 features a 1" Inverted Hard-Dome Tweeter and 1 x 6.5" Polyglass Woofer .
Frequency Response
R-5650-S II and 100 IW 6 has exactly the same frequency range of 60-23kHz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R-5650-S II and 100 IW 6 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R-5650-S II sensitivity is rated at 92 dB and the 100 IW 6's is at 89 dB. This 3 dB difference makes the Klipsch R-5650-S II a more sensitive speaker compared to Focal 100 IW 6, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
R-5650-S II can handle a max power of 120 watts RMS from the amp the whereas R-5650-S II has a max power handling value of 50 watts RMS , 70 watts less than the 100 IW 6.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R-5650-S II features Spring post type posts and 100 IW 6 has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-5650-S II's and Focal 100 IW 6's external dimensions. Klipsch R-5650-S II has external dimensions of 331.0 x 204.0 x 94.0mm ( 13.0000-inch x 8.0000-inch x 3.6875-inch) whereas Focal 100 IW 6 has external dimensions of 274.0 x 169.0 x 86.0mm ( 10.7500-inch x 6.6250-inch x 3.3750-inch) .
Klipsch R-5650-S II is clearly the larger of the two speakers. Its body is 35mm wider, 57mm taller and 8mm deeper than Focal 100 IW 6.
What's in the Box of Klipsch R-5650-S II?
Here are the items that are included inside the box of R-5650-S II:
In-wall speakerWhite metal mesh grilleCardboard templateOwners Manual (En/Fr/Sp)
What's in the Box of Focal 100 IW 6?
Here are the items that come with the 100 IW 6:
One in-wall speaker1 metal-mesh grill (white)Cut-out templateUser manual
Sensitivity 
Price per pair* 
Max Input Power 
Height 
Base Surface Area