In this review, we will be comparing R-1650-W and Stage 260W, two Passive In-wall speakers from Klipsch and JBL.
Let's have a brief look at the main features
of Klipsch R-1650-W and JBL Stage 260W first before getting into our more
detailed comparison.
| Key Specs | Klipsch R-1650-W | JBL Stage 260W |
|---|
| Brand | Klipsch
United States · founded 1946 | JBL
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Soft-Dome | 1" Horn-Loaded |
|---|
| Woofer | 6.5" Poly | 6.5" Polycellulose |
|---|
| Frequency response | 53-20kHz | 50-25kHz |
|---|
| Sensitivity | 88 dB | 87 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | up to 35 watts | 20-100 watts |
|---|
| Weight | 2.95kg / 6.5lbs | — |
|---|
| Dimensions (H x W x D) | 13.0000" x 8.0000" x 3.0000"
331.0 x 204.0 x 77.0mm | 12.2500" x 7.2500" x 3.5625"
312.0 x 185.0 x 91.0mm |
|---|
What size room are the Klipsch R-1650-W and JBL Stage 260W speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch R-1650-W |
JBL Stage 260W |
| Near-field |
Good |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-1650-W and Stage 260W are 2-way speakers.
Klipsch R-1650-WJBL Stage 260W
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Klipsch R-1650-W |
JBL Stage 260W |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
R-1650-W features a 1" Soft-Dome Tweeter and 1 x 6.5" Poly Woofer. On the other hand, the Stage 260W features a 1" Horn-Loaded Tweeter and 1 x 6.5" Polycellulose Woofer.
Frequency Response
R-1650-W has a frequency range of 53-20kHz whereas Stage 260W has a frequency range of 50-25kHz. With a minimum frequency of 50Hz, the Stage 260W can go slightly deeper then the R-1650-W's min frequency of 53Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R-1650-W and Stage 260W have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R-1650-W sensitivity is rated at 88 dB and the Stage 260W's is at 87 dB. This 1 dB difference makes the Klipsch R-1650-W a more sensitive speaker compared to JBL Stage 260W, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Stage 260W can handle a max power of 100 watts RMS, whereas R-1650-W has a max power handling value of 35 watts RMS, 65 watts less than the Stage 260W.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
R-1650-W features Spring clip type posts and Stage 260W has a Spring clip type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-1650-W's and JBL Stage 260W's external dimensions. Klipsch R-1650-W has external dimensions of 331.0 x 204.0 x 77.0mm (13.0000-inch x 8.0000-inch x 3.0000-inch) whereas JBL Stage 260W has external dimensions of 312.0 x 185.0 x 91.0mm (12.2500-inch x 7.2500-inch x 3.5625-inch).
JBL Stage 260W is 19mm narrower and 19mm shorter than Klipsch R-1650-W but it is also 14mm deeper.
What's in the Box of Klipsch R-1650-W?
Here are the items that are included inside the box of R-1650-W:
- Rectangular in-wall speaker
- White metal mesh grille
- Plastic paint mask
- Cardboard template
- Plastic paint shield
- Owners Manual (Eng/Fre/Spa/Ger/Ita/Por/Chi/Jap)
What's in the Box of JBL Stage 260W?
Here are the items that come with the Stage 260W:
- In-wall loudspeaker
- Grille
- Cut-Out Template
- Quick Start Guide