In this review, we will be comparing YU2 and A2+ Wireless, two Powered Bookshelf speakers from Kanto and Audioengine. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Kanto YU2 and Audioengine A2+ Wireless first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Kanto YU2 and Audioengine A2+ Wireless compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both YU2 and A2+ Wireless are 2-way speakers.
| Driver |
Kanto YU2 |
Audioengine A2+ Wireless |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
0.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 3-inch
|
1 x 2.75-inch
|
YU2 features a 0.75" Silk Soft-Dome Tweeter and 1 x 3" Kevlar Woofer . On the other hand, the A2+ Wireless features a 0.75" Silk Soft-Dome Tweeter and 1 x 2.75" Kevlar Woofer .
Frequency Response
YU2 has a frequency range of 80-20k Hz whereas A2+ Wireless has a frequency range of 65-22k Hz. With a minimum frequency of 65Hz, the A2+ Wireless can go significantly deeper on the low side and provide stronger bass compared to the YU2's min frequency of 80Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
YU2 has a rear firing port whereas A2+ Wireless has a front firing ports. Audioengine A2+ Wireless's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Kanto YU2 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto YU2's and Audioengine A2+ Wireless's external dimensions. Kanto YU2 has external dimensions of 150.0 x 100.0 x 135.0mm ( 5.90 x 3.9 x 5.3inch) whereas Audioengine A2+ Wireless has external dimensions of 158.8 x 106.4 x 168.3mm ( 6.25 x 4.1875 x 6.625inch) .
Audioengine A2+ Wireless is clearly the larger of the two speakers. Its body is 6.4mm wider, 8.8mm taller and 33.3mm deeper than Kanto YU2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto YU2 is approximately 135.0cm2 / 20.9inch2 and base area of the Audioengine A2+ Wireless is approximately 179.1cm2 / 27.8inch2. The YU2 requires 25% less surface area than the A2+ Wireless which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Kanto YU2 weighs 1.30kg / 2.9lbs and the Audioengine A2+ Wireless weighs 1.40kg / 3.1lbs. This makes the A2+ Wireless 8% heavier than the YU2.
Here is a comparison of how YU2 and A2+ Wireless's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Kanto YU2?
Here are the items that are included inside the box of YU2:
Power Cord Speaker Wire (10-feet) USB DAC Cable 3.5mm Auxiliary Cable (6.5-feet) 8 x Rubber Feet Manual
What's in the Box of Audioengine A2+ Wireless?
Here are the items that come with the A2+ Wireless:
Wireless powered left speakerPassive right speakerAC power supply (w/ attached 6-feet DC cord)6-feet AC power cord6.5-feet Length of 16 gauge speaker wire5-feet microUSB-to-USB cable6-feet Stereo minijack cable2 Cloth drawstring speaker pouches2 Cloth drawstring accessory pouchesQuick Start GuideAudioengine product brochure
 Woofer Size |
3 inches
vs
2.75 inches
|
Larger woofer |
 Height |
150mm
vs
158mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
135cm2 (100x135mm)
vs
179cm2 (106x168mm)
|
Takes less floor space |
 Price per pair* |
240USD
vs
269USD
|
costs less (*prices may change depending on the seller, location and time) |
| Low Frequency Response |
65 Hz
vs
80 Hz
|
Generates deeper bass |
 High Frequency Response |
22k Hz
vs
20k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 USB Port |
microUSB
vs
No
|
USB port adds flexibility |
 3.5mm Connection |
Yes
vs
No
|
Connection via 3.5mm AUX input |
 RCA Connection |
Yes
vs
No
|
Connection via RCA input |
 Subwoofer Output |
Wired
vs
No
|
Pair your speakers with external subwoofer |
| General |
Kanto YU2 |
Audioengine A2+ Wireless |
| Brand |
Kanto |
Audioengine |
| Speaker Type |
Powered Stereo Speakers |
Powered Stereo Speakers |
| Frequency Response |
80-20k Hz |
65-22k Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
50-watt RMS |
30-watt RMS |
| Watts Peak (Max) |
100-watt RMS |
n/a |
| Max Bit Depth |
24-bit |
16-bit |
| Max Sample Rate |
96 kHz |
48 kHz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
3" |
2.75" |
| Woofer Composition |
Kevlar |
Kevlar |
| Tweeter Size |
0.75" |
0.75" |
| Tweeter Type |
Soft-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
150.0mm (5.9") |
158.8mm (6.3") |
| Width |
100.0mm (3.9") |
106.4mm (4.2") |
| Depth |
135.0mm (5.3") |
168.3mm (6.6") |
| Weight |
1.30kg (2.9lbs) |
1.40kg (3.1lbs) |
| Enclosure |
bass reflex |
Bass Reflex |
| Mounting Bracket |
No |
No |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Aux Inputs |
RCA |
3.5mm, RCA |
| USB Port |
No |
microUSB |
| Phone Input |
No |
No |
| Subwoofer Output |
No |
Wired |
| Digital Input |
No |
No |
| HDMI Input |
No |
No |
| Headphone Jack |
No |
No |
| Ethernet Port |
No |
No |
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |