In this review, we will be comparing ORA and YU6, two Powered Bookshelf speakers by Kanto Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of Kanto ORA and Kanto YU6 first before getting into our more
detailed comparison.
Kanto ORA Key Specs
- 2-way Design
- 50-watt RMS( 100-watt Peak) Integrated Amplifier
- 0.75" Soft-Dome Tweeter
- 3" Paper Woofer
- 70-22k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 5.0 Bluetooth
- Dimensions (H x W x D): 177.0" x 3.9375" x 7.4375"( 177.0 x 101.0 x 189.0mm )
Kanto YU6 Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 1" Soft-Dome Tweeter
- 5.25" Kevlar Woofer
- 50-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 4.0 Bluetooth
- Weight:4.00kg
- Dimensions (H x W x D): 272.0" x 6.9" x 8.1"( 272.0 x 175.0 x 205.0mm )
In the following sections, we will get into more detail in order to better understand how the Kanto ORA and Kanto YU6 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ORA and YU6 are 2-way speakers.
| Driver |
Kanto ORA |
Kanto YU6 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 3-inch
|
1 x 5.25-inch
|
ORA features a 0.75" Silk Soft-Dome Tweeter and 1 x 3" Paper Woofer . On the other hand, the YU6 features a 1" Silk Soft-Dome Tweeter and 1 x 5.25" Kevlar Woofer .
Frequency Response
ORA has a frequency range of 70-22k Hz whereas YU6 has a frequency range of 50-20k Hz. With a minimum frequency of 50Hz, the YU6 can go significantly deeper on the low side and provide stronger bass compared to the ORA's min frequency of 70Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both ORA and YU6 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto ORA's and Kanto YU6's external dimensions. Kanto ORA has external dimensions of 177.0 x 101.0 x 189.0mm ( 6.94inch x 3.94inch x 7.5inch ) whereas Kanto YU6 has external dimensions of 272.0 x 175.0 x 205.0mm ( 10.7 x 6.9 x 8.1inch) .
Kanto YU6 is clearly the larger of the two speakers. Its body is 74mm wider, 95mm taller and 16mm deeper than Kanto ORA.
Below you can see the front view size comparison of Kanto ORA and Kanto YU6 in scale.
Comparison image of Kanto ORA and Kanto YU6 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto ORA is approximately 190.9cm2 / 29.6inch2 and base area of the Kanto YU6 is approximately 358.8cm2 / 55.6inch2. The ORA requires 47% less surface area than the YU6 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Kanto ORA and Kanto YU6 on a Media Console
What's in the Box of Kanto ORA?
Here are the items that are included inside the box of ORA:
Powered speakerPassive speakerAC power adapter (attached 58
What's in the Box of Kanto YU6?
Here are the items that come with the YU6:
Remote with Batteries Power Cord Speaker Wire (16′) 3.5mm Auxiliary Cable (6.5′) 8 x Rubber Feet Manual