In this review, we will be comparing Kendall and Chora 826-D, two Passive Floor-standing speakers from KLH and Focal.
Let's have a brief look at the main features
of KLH Kendall and Focal Chora 826-D first before getting into our more
detailed comparison.
KLH Kendall Key Specs
- 3-way Design
- 1" Tweeter
- 5.25" Midrange
- 2 x 6.5" Woven Kevlar Woofer
- 25-23k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 250watts
- Weight:22.14kg
- Dimensions (H x W x D): 1021.0" x 8-5/16" x 14-15/16"( 1021.0 x 212.0 x 380.0mm )
Focal Chora 826-D Key Specs
- 3-way Design
- 1" inverted dome Tweeter
- 6.5" Midrange
- 2 x 6.5" Slatefiber Woofer
- 6.5" Midrange
- 48-28k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 8ohms
- Power Range:40-250watts
- Weight:22.20kg
- Dimensions (H x W x D): 1053.0" x 12" x 16-1/2"( 1053.0 x 305.0 x 420.0mm )
In the following sections, we will get into more detail in order to better understand how the KLH Kendall and Focal Chora 826-D compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Kendall and Chora 826-D are 3-way speakers.
| Driver |
KLH Kendall |
Focal Chora 826-D |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 6.5-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
Kendall features a 1" anodized aluminum Tweeter , a 5.25" Midrange and 2 x 6.5" Woven Kevlar Woofer . On the other hand, the Chora 826-D features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Slatefiber Woofer with a Crossover frequency at 270Hz and 2700Hz.
Frequency Response
Kendall has a frequency range of 25-23k Hz whereas Chora 826-D has a frequency range of 48-28k Hz. With a minimum frequency of 25Hz, the Kendall can go significantly deeper on the low side and provide stronger bass compared to the Chora 826-D's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Kendall and Chora 826-D have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Kendall sensitivity is rated at 96 dB and the Chora 826-D's is at 91 dB. This 5 dB difference makes the KLH Kendall a more sensitive speaker compared to Focal Chora 826-D, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Kendall can handle a max power of 250 watts RMS from the amp the whereas Kendall has a max power handling value of watts RMS , 250 watts less than the Chora 826-D.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Kendall features Binding post posts which make bi-amping or bi-wiring possible. Chora 826-D has a Binding post which doesn't feature bi-amping/bi-wiring.
KLH Kendall's Binding post terminals allows Bi-amping or bi-wiring
Focal Chora 826-D's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KLH Kendall's and Focal Chora 826-D's external dimensions. KLH Kendall has external dimensions of 1021.0 x 212.0 x 380.0mm ( 40-3/16 x 8-5/16 x 14-15/16inch) whereas Focal Chora 826-D has external dimensions of 1053.0 x 305.0 x 420.0mm ( 41-7/16 x 12 x 16-1/2inch) .
Focal Chora 826-D is clearly the larger of the two speakers. Its body is 93mm wider, 32mm taller and 40mm deeper than KLH Kendall.
Below you can see the front view size comparison of KLH Kendall and Focal Chora 826-D in scale.
Comparison image of KLH Kendall and Focal Chora 826-D Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KLH Kendall is approximately 805.6cm2 / 124.9inch2 and base area of the Focal Chora 826-D is approximately 1281.0cm2 / 198.6inch2. The Kendall requires 37% less surface area than the Chora 826-D which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KLH Kendall weighs 22.14kg / 48.7lbs and the Focal Chora 826-D weighs 22.20kg / 48.8lbs. This makes the Chora 826-D 0% heavier than the Kendall.
Here is a comparison of how Kendall and Chora 826-D's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KLH Kendall?
Here are the items that are included inside the box of Kendall:
Floorstanding loudspeakerGrilleFoam port4 Rubber feet4 Spike feet (with nuts)4 Protective discsManual
What's in the Box of Focal Chora 826-D?
Here are the items that come with the Chora 826-D:
Dolby-Atmos enabled floorstanding loudspeakerBase4 Rubber feet4 Spike feet4 Nuts4 Screws4 WashersHex-key2 GrillesUser manual
 Sensitivity |
96 dB
vs
91 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
25 Hz
vs
48 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1021mm
vs
1053mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
805cm2
vs
1281cm2
|
Takes less floor space |
 Price per pair* |
1500USD
vs
2998USD
|
costs less (*prices may change depending on the seller, location and time) |
 High Frequency Response |
28k Hz
vs
23k Hz
|
Generates higher frequency |
 Dolby Atmos Drivers |
Built-in 1 x 5-1/8
vs
No
|
Dolby Atmos Compatibility |
| General |
KLH Kendall |
Focal Chora 826-D |
| Brand |
KLH |
Focal |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 250 watts |
40-250 watts |
| Sensitivity |
96 dB |
91 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
2.9 ohms |
| Frequency Response |
25-23k Hz |
48-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Woven Kevlar |
Slatefiber |
| Woofer Surround Material |
Butyl Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
6.5" |
| Crossover Frequency |
n/a |
270Hz and 2700Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
1021.0mm (40.2") |
1053.0mm (41.5") |
| Width |
212.0mm (8.3") |
305.0mm (12") |
| Depth |
380.0mm (15") |
420.0mm (16.5") |
| Weight |
22.14kg (48.7lbs) |
22.20kg (48.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood Veneer |
MDF/Vinyl-wrap |
| Available Colors |
Black |
Black, Dark wood, Light wood |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
10 Years |
5 Years |
| Labor Warranty |
10 Years |
5 Years |