In this review, we will be comparing Kendall and Oberon 9, two Passive Floor-standing speakers from KLH and DALI. Let's have a brief look at the main features
of KLH Kendall and DALI Oberon 9 first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the KLH Kendall and DALI Oberon 9 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Kendall and Oberon 9 are 3-way speakers.
| Driver |
KLH Kendall |
DALI Oberon 9 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1.125-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 7-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 9-inch
|
Kendall features a 1" anodized aluminum Tweeter , a 5.25" Midrange and 2 x 6.5" Woven Kevlar Woofer . On the other hand, the Oberon 9 features a 1.125" Soft-Dome Tweeter , a 7" Midrange and 2 x 9" Wood Fiber Woofer with a Crossover frequency at 780Hz and 3400Hz.
Frequency Response
Kendall has a frequency range of 25-23k Hz whereas Oberon 9 has a frequency range of 35-26k Hz. With a minimum frequency of 25Hz, the Kendall can go significantly deeper on the low side and provide stronger bass compared to the Oberon 9's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Kendall is a 8 ohms speaker compared to the Oberon 9 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Oberon 9 can provide this impedance level.
These two speakers also have different sensitivity levels. Kendall sensitivity is rated at 96 dB and the Oberon 9's is rated at 90.5 dB. This 5 dB difference makes the KLH Kendall a more sensitive speaker compared to DALI Oberon 9, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Kendall can handle a max power of 400 watts RMS from the amp the whereas Kendall has a max power handling value of watts RMS , 400 watts less than the Oberon 9.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Kendall features Binding post posts which make bi-amping or bi-wiring possible. Oberon 9 has a Post which doesn't feature bi-amping/bi-wiring.
KLH Kendall's Binding post terminals allows Bi-amping or bi-wiring
DALI Oberon 9's Post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KLH Kendall's and DALI Oberon 9's external dimensions. KLH Kendall has external dimensions of 1021.0 x 212.0 x 380.0mm ( 40-3/16 x 8-5/16 x 14-15/16inch) whereas DALI Oberon 9 has external dimensions of 1172.0 x 260.0 x 407.0mm ( 46-1/8 x 10-1/4 x 16inch) .
DALI Oberon 9 is clearly the larger of the two speakers. Its body is 48mm wider, 151mm taller and 27mm deeper than KLH Kendall.
Below you can see the front view size comparison of KLH Kendall and DALI Oberon 9 in scale.
Comparison image of KLH Kendall and DALI Oberon 9 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KLH Kendall is approximately 805.6cm2 / 124.9inch2 and base area of the DALI Oberon 9 is approximately 1058.2cm2 / 164.0inch2. The Kendall requires 24% less surface area than the Oberon 9 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KLH Kendall weighs 22.14kg / 48.7lbs and the DALI Oberon 9 weighs 37.10kg / 81.6lbs. This makes the Oberon 9 68% heavier than the Kendall.
Here is a comparison of how Kendall and Oberon 9's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KLH Kendall?
Here are the items that are included inside the box of Kendall:
Floorstanding loudspeakerGrilleFoam port4 Rubber feet4 Spike feet (with nuts)4 Protective discsManual
What's in the Box of DALI Oberon 9?
Here are the items that come with the Oberon 9:
Floorstanding loudspeakerGrille4 Rubber feet4 Spike-feet4 Hex-nutsManua
 Sensitivity |
96 dB
vs
91 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
25 Hz
vs
35 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1021mm
vs
1172mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
805cm2 (212x380mm)
vs
1058cm2 (260x407mm)
|
Takes less floor space |
 Price per pair* |
1500USD
vs
2500USD
|
costs less (*prices may change depending on the seller, location and time) |
| Woofer Size |
9 inches
vs
6.5 inches
|
Larger woofer |
 High Frequency Response |
26k Hz
vs
23k Hz
|
Generates higher frequency |
| General |
KLH Kendall |
DALI Oberon 9 |
| Brand |
KLH |
DALI |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 250 watts |
50-400 watts |
| Sensitivity |
96 dB |
90.5 dB |
| Impedance |
8 ohms |
4 ohms |
| Frequency Response |
25-23k Hz |
35-26k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
9" |
| Woofer Composition |
Woven Kevlar |
Wood Fiber |
| Woofer Surround Material |
Butyl Rubber |
Rubber |
| Tweeter Size |
1" |
1.125" |
| Tweeter Type |
n/a |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
7" |
| Crossover Frequency |
n/a |
780Hz and 3400Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1021.0mm (40.2") |
1172.0mm (46.1") |
| Width |
212.0mm (8.3") |
260.0mm (10.2") |
| Depth |
380.0mm (15") |
407.0mm (16") |
| Weight |
22.14kg (48.7lbs) |
37.10kg (81.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood Veneer |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black Ash, Light Oak, Dark Walnut, White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
10 Years |
5 Years |
| Labor Warranty |
10 Years |
5 Years |