In this review, we will be comparing Concord and R-820F, two Passive Floor-standing speakers from KLH and Klipsch.
Let's have a brief look at the main features
of KLH Concord and Klipsch R-820F first before getting into our more
detailed comparison.
KLH Concord Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 6.5" Kevlar Woofer
- 28-23k Hz Frequency Response
- 94 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 225watts
- Weight:20.45kg
- Dimensions (H x W x D): 1026.0" x 8-5/16" x 14-15/16"( 1026.0 x 212.0 x 380.0mm )
Klipsch R-820F Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 8" Copper-spun IMG Woofer
- 35-21k Hz Frequency Response
- 97 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 150watts
- Weight:24.55kg
- Dimensions (H x W x D): 1096.0" x 10-7/8" x 16-3/4"( 1096.0 x 277.0 x 426.0mm )
In the following sections, we will get into more detail in order to better understand how the KLH Concord and Klipsch R-820F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Concord and R-820F are 2-way speakers.
| Driver |
KLH Concord |
Klipsch R-820F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
Concord features a 1" anodized aluminum Tweeter and 2 x 6.5" Kevlar Woofer . On the other hand, the R-820F features a 1" Tweeter and 2 x 8" Copper-spun IMG Woofer .
Frequency Response
Concord has a frequency range of 28-23k Hz whereas R-820F has a frequency range of 35-21k Hz. With a minimum frequency of 28Hz, the Concord can go significantly deeper on the low side and provide stronger bass compared to the R-820F's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Concord and R-820F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Concord sensitivity is rated at 94 dB and the R-820F's is at 97 dB. This 3 dB difference makes the Klipsch R-820F a more sensitive speaker compared to KLH Concord, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Concord can handle a max power of 150 watts RMS from the amp the whereas Concord has a max power handling value of watts RMS , 150 watts less than the R-820F.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Concord features Post type posts and R-820F has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
KLH Concord's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KLH Concord's and Klipsch R-820F's external dimensions. KLH Concord has external dimensions of 1026.0 x 212.0 x 380.0mm ( 40-3/8 x 8-5/16 x 14-15/16inch) whereas Klipsch R-820F has external dimensions of 1096.0 x 277.0 x 426.0mm ( 43-1/8 x 10-7/8 x 16-3/4inch) .
Klipsch R-820F is clearly the larger of the two speakers. Its body is 65mm wider, 70mm taller and 46mm deeper than KLH Concord.
Below you can see the front view size comparison of KLH Concord and Klipsch R-820F in scale.
Comparison image of KLH Concord and Klipsch R-820F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KLH Concord is approximately 805.6cm2 / 124.9inch2 and base area of the Klipsch R-820F is approximately 1180.0cm2 / 182.9inch2. The Concord requires 32% less surface area than the R-820F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KLH Concord weighs 20.45kg / 45lbs and the Klipsch R-820F weighs 24.55kg / 54lbs. This makes the R-820F 20% heavier than the Concord.
Here is a comparison of how Concord and R-820F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KLH Concord?
Here are the items that are included inside the box of Concord:
Floorstanding loudspeakerGrille4 Spike feet (w/ locking nut attached)4 Protective discs4 Rubber feetPort plugManualATTENTION! note
What's in the Box of Klipsch R-820F?
Here are the items that come with the R-820F:
Floorstanding loudspeakerGrille (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 Low Frequency Response |
28 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
23k Hz
vs
21k Hz
|
Generates higher frequency |
 Height |
1026mm
vs
1096mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
805cm2
vs
1180cm2
|
Takes less floor space |
 Price per pair* |
1000USD
vs
1198USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
97 dB
vs
94 dB
|
Play louder with same amount of amplification power |
|
Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
| General |
KLH Concord |
Klipsch Reference R-820F |
| Brand |
KLH |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 225 watts |
up to 150 watts |
| Sensitivity |
94 dB |
97 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
28-23k Hz |
35-21k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Kevlar |
Copper-spun IMG |
| Woofer Surround Material |
Butyl Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
Physical Specs |
|
|
| Height |
1026.0mm (40.4") |
1096.0mm (43.1") |
| Width |
212.0mm (8.3") |
277.0mm (10.9") |
| Depth |
380.0mm (15") |
426.0mm (16.8") |
| Weight |
20.45kg (45lbs) |
24.55kg (54lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
10 Years |
5 Years |
| Labor Warranty |
10 Years |
5 Years |