In this review, we will be comparing Concord and UFR52, two Passive Floor-standing speakers from KLH and ELAC.
Let's have a brief look at the main features
of KLH Concord and ELAC Uni-Fi Ref UFR52 first before getting into our more
detailed comparison.
KLH Concord Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 6.5" Kevlar Woofer
- 28-23k Hz Frequency Response
- 94 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 225watts
- Weight:20.45kg
- Dimensions (H x W x D): 1026.0" x 8-5/16" x 14-15/16"( 1026.0 x 212.0 x 380.0mm )
ELAC Uni-Fi Ref UFR52 Key Specs
- 3-way Design
- 1" soft dome Tweeter
- 4" Midrange
- 3 x 5.25" Aluminum Woofer
- 4" Midrange
- 40-35k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 140watts
- Weight:23.80kg
- Dimensions (H x W x D): 1005.0" x 9-1/4" x 13-5/16"( 1005.0 x 235.0 x 339.0mm )
In the following sections, we will get into more detail in order to better understand how the KLH Concord and ELAC Uni-Fi Ref UFR52 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Concord is a 2-way design whereas the UFR52 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
KLH Concord |
ELAC Uni-Fi Ref UFR52 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 4-inch |
|
Woofer
|
2 x 6.5-inch
|
3 x 5.25-inch
|
Concord features a 1" anodized aluminum Tweeter and 2 x 6.5" Kevlar Woofer . On the other hand, the UFR52 features a 1" soft dome Tweeter , a 4" Midrange and 3 x 5.25" Aluminum Woofer .
Frequency Response
Concord has a frequency range of 28-23k Hz whereas UFR52 has a frequency range of 40-35k Hz. With a minimum frequency of 28Hz, the Concord can go significantly deeper on the low side and provide stronger bass compared to the UFR52's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Concord is a 8 ohms speaker compared to the UFR52 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. Concord sensitivity is rated at 94 dB and the UFR52's is rated at 86 dB. This 8 dB difference makes the KLH Concord a more sensitive speaker compared to ELAC Uni-Fi Ref UFR52, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Concord can handle a max power of 140 watts RMS from the amp the whereas Concord has a max power handling value of watts RMS , 140 watts less than the UFR52.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
UFR52 features Binding post posts which make bi-amping or bi-wiring possible. Concord has a 5-Way post which doesn't feature bi-amping/bi-wiring.
KLH Concord's 5-Way post terminals
ELAC Uni-Fi Ref UFR52's Binding post terminals allows Bi-amping or bi-wiring
ELAC Uni-Fi Ref UFR52 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KLH Concord's and ELAC Uni-Fi Ref UFR52's external dimensions. KLH Concord has external dimensions of 1026.0 x 212.0 x 380.0mm ( 40-3/8 x 8-5/16 x 14-15/16inch) whereas ELAC Uni-Fi Ref UFR52 has external dimensions of 1005.0 x 235.0 x 339.0mm ( 39-9/16 x 9-1/4 x 13-5/16inch) .
ELAC Uni-Fi Ref UFR52 is 21mm shorter and 41mm less deeper than KLH Concord but it is also 23mm wider.
Below you can see the front view size comparison of KLH Concord and ELAC Uni-Fi Ref UFR52 in scale.
Comparison image of KLH Concord and ELAC Uni-Fi Ref UFR52 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KLH Concord is approximately 805.6cm2 / 124.9inch2 and base area of the ELAC Uni-Fi Ref UFR52 is approximately 796.7cm2 / 123.5inch2. The Concord requires 1% more surface area than the UFR52 which gives it a small disadvantage on placement in tight spaces.