In this review, we will be comparing Concord and Evoke 30, two Passive Floor-standing speakers from KLH and Dynaudio. Let's have a brief look at the main features
of KLH Concord and Dynaudio Evoke 30 first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the KLH Concord and Dynaudio Evoke 30 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Concord and Evoke 30 are 2-way speakers.
Driver |
KLH Concord |
Dynaudio Evoke 30 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1.1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 6.5-inch
|
2 x 5.5-inch
|
Concord features a 1" anodized aluminum Tweeter and 2 x 6.5" Kevlar Woofer . On the other hand, the Evoke 30 features a 1.1" Tweeter and 2 x 5.5" Magnesium Silicate Polymer Woofer with a Crossover frequency at 1200Hz and 2300Hz.
Frequency Response
Concord has a frequency range of 28-23k Hz whereas Evoke 30 has a frequency range of 40-23k Hz. With a minimum frequency of 28Hz, the Concord can go significantly deeper on the low side and provide stronger bass compared to the Evoke 30's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Concord is a 8 ohms speaker compared to the Evoke 30 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Evoke 30 can provide this impedance level.
These two speakers also have different sensitivity levels. Concord sensitivity is rated at 94 dB and the Evoke 30's is rated at 88 dB. This 6 dB difference makes the KLH Concord a more sensitive speaker compared to Dynaudio Evoke 30, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Concord can handle a max power of 200 watts RMS from the amp the whereas Concord has a max power handling value of watts RMS , 200 watts less than the Evoke 30.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Concord features Binding post type posts and Evoke 30 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KLH Concord's and Dynaudio Evoke 30's external dimensions. KLH Concord has external dimensions of 1026.0 x 212.0 x 380.0mm ( 40-3/8 x 8-5/16 x 14-15/16inch) whereas Dynaudio Evoke 30 has external dimensions of 928.0 x 180.0 x 343.0mm ( 36-1/2 x 10-5/8 x 13-1/2inch) .
KLH Concord is clearly the larger of the two speakers. Its body is 32mm wider, 98mm taller and 37mm deeper than Dynaudio Evoke 30.
Below you can see the front view size comparison of KLH Concord and Dynaudio Evoke 30 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KLH Concord is approximately 805.6cm2 / 124.9inch2 and base area of the Dynaudio Evoke 30 is approximately 617.4cm2 / 95.7inch2. The Concord requires 30% more surface area than the Evoke 30 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KLH Concord weighs 20.45kg / 45lbs and the Dynaudio Evoke 30 weighs 15.50kg / 34.1lbs. This makes the Concord 32% heavier than the Evoke 30.
Here is a comparison of how Concord and Evoke 30's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KLH Concord?
Here are the items that are included inside the box of Concord:
Floorstanding loudspeakerGrille4 Spike feet (w/ locking nut attached)4 Protective discs4 Rubber feetPort plugManualATTENTION! note
What's in the Box of Dynaudio Evoke 30?
Here are the items that come with the Evoke 30:
Floorstanding loudspeakerGrille4 Outrigger feet4 Spikes4 Locking nuts8 Washers8 ScrewsFoam port plugHex-keyTweeter protection cover (pre-installed)Instructions for UseImportant Safety InstructionsWarranty Card
Sensitivity |
94 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
6.5 inches
vs
5.5 inches
|
Larger woofer |
Low Frequency Response |
28 Hz
vs
40 Hz
|
Generates deeper bass |
Price per pair* |
1000USD
vs
3500USD
|
costs less (*prices may change depending on the seller, location and time) |
Height |
928mm
vs
1026mm
|
Easier to fit in smaller spaces |
Base Surface Area |
617cm2 (180x343mm)
vs
805cm2 (212x380mm)
|
Takes less floor space |
General |
KLH Concord |
Dynaudio Evoke 30 |
Brand |
KLH |
Dynaudio |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
up to 225 watts |
up to 200 watts |
Sensitivity |
94 dB |
88 dB |
Impedance |
8 ohms |
4 ohms |
Frequency Response |
28-23k Hz |
40-23k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
6.5" |
5.5" |
Woofer Composition |
Kevlar |
Magnesium Silicate Polymer |
Woofer Surround Material |
Butyl Rubber |
Rubber |
Tweeter Size |
1" |
1.1" |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
1200Hz and 2300Hz |
Firing Direction |
n/a |
rear |
Physical Specs |
|
|
Height |
1026.0mm (40.4") |
928.0mm (36.5") |
Width |
212.0mm (8.3") |
180.0mm (7.1") |
Depth |
380.0mm (15") |
343.0mm (13.5") |
Weight |
20.45kg (45lbs) |
15.50kg (34.1lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Wood veneer |
Available Colors |
Black |
Oak (blonde) |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
10 Years |
5 Years (8 Years registered) |
Labor Warranty |
10 Years |
5 Years (8 Years registered) |