In this review, we will be comparing R7 and Aria 926, two Passive Floor-standing speakers from KEF and Focal. Let's have a brief look at the main features
of KEF R7 and Focal Aria 926 first before getting into our more
detailed comparison.
What size room are the KEF R7 and Focal Aria 926 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF R7 and Focal Aria 926 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R7 and Aria 926 are 3-way speakers.
Driver |
KEF R7 |
Focal Aria 926 |
Driver Setup
|
3-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 5-inch |
1 x 6.5-inch |
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
R7 features a 1" aluminum Dome Tweeter , a 5" Midrange and 2 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz. On the other hand, the Aria 926 features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Flax Woofer with a Crossover frequency at 290Hz and 2,400Hz.
Frequency Response
R7 has a frequency range of 48-28k Hz whereas Aria 926 has a frequency range of 45-28k Hz. With a minimum frequency of 45Hz, the Aria 926 can go slightly deeper then the R7's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R7 and Aria 926 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R7 sensitivity is rated at 88 dB and the Aria 926's is at 91.5 dB. This 4 dB difference makes the Focal Aria 926 a more sensitive speaker compared to KEF R7, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R7 features Binding post posts which make bi-amping or bi-wiring possible. Aria 926 has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF R7's and Focal Aria 926's external dimensions. KEF R7 has external dimensions of 1113.0 x 200.0 x 389.0mm ( 43-13/16 x 8 x 15-5/16inch) whereas Focal Aria 926 has external dimensions of 1039.0 x 294.0 x 374.0mm ( 40-7/8 x 11-9/16 x 14-11/16inch) .
Focal Aria 926 is 74mm shorter and 15mm less deeper than KEF R7 but it is also 94mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF R7 is approximately 778.0cm2 / 120.6inch2 and base area of the Focal Aria 926 is approximately 1099.6cm2 / 170.4inch2. The R7 requires 29% less surface area than the Aria 926 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF R7 weighs 31.40kg / 69.1lbs and the Focal Aria 926 weighs 25.00kg / 55lbs. This makes the R7 26% heavier than the Aria 926.
Here is a comparison of how R7 and Aria 926's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KEF R7?
Here are the items that are included inside the box of R7:
Floorstanding loudspeakerGrille2 Foam port plugs4 Outrigger feet4 Spikes4 Protective discs4 Screws4 WashersWrenchHex-keyUser ManualWarranty Information
What's in the Box of Focal Aria 926?
Here are the items that come with the Aria 926:
Floorstanding loudspeakerGrilleBase4 Spike feet (pre-installed in base)4 Plastic feet4 ScrewsAllen-keyHex-toolUser Manual
Minimum Impedance |
3.2 ohms
vs
2.9 ohms
|
Very low impedance levels puts more pressure on amplifier |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Base Surface Area |
778cm2 (200x389mm)
vs
1099cm2 (294x374mm)
|
Takes less floor space |
Price per pair* |
4500USD
vs
4798USD
|
costs less (*prices may change depending on the seller, location and time) |
Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
45 Hz
vs
48 Hz
|
Generates deeper bass |
Height |
1039mm
vs
1113mm
|
Easier to fit in smaller spaces |
General |
KEF R7 |
Focal Aria 926 |
Brand |
KEF |
Focal |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
15-250 watts |
40-250 watts |
Sensitivity |
88 dB |
91.5 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
3.2 ohms |
2.9 ohms |
Frequency Response |
48-28k Hz |
45-28k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Hybrid Aluminum |
Flax |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
inverted dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
5" |
6.5" |
Crossover Frequency |
400Hz and 2900Hz |
290Hz and 2,400Hz |
Firing Direction |
rear |
n/a |
Physical Specs |
|
|
Height |
1113.0mm (43.8") |
1039.0mm (40.9") |
Width |
200.0mm (7.9") |
294.0mm (11.6") |
Depth |
389.0mm (15.3") |
374.0mm (14.7") |
Weight |
31.40kg (69.1lbs) |
25.00kg (55lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Lacquer |
MDF/Glass/Leather |
Available Colors |
Black Gloss, White Gloss, Walnut |
Gloss Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |