In this review, we will be comparing R3 Meta and R3, two Passive Bookshelf speakers by KEF Let's have a brief look at the main features
of KEF R3 Meta and KEF R3 first before getting into our more
detailed comparison.
What size room are the KEF R3 Meta and KEF R3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF R3 Meta and KEF R3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R3 Meta and R3 are 3-way speakers.
| Driver |
KEF R3 Meta |
KEF R3 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5-inch |
1 x 5-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
R3 Meta features a 1" Aluminum with MAT absorber Hard-Dome Tweeter , a 5" Midrange and 1 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 420Hz and 2300Hz. On the other hand, the R3 features a 1" aluminum Dome Tweeter , a 5" Midrange and 1 x 6.5" Hybrid aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
R3 Meta has a frequency range of 58-28k Hz whereas R3 has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the R3 can go significantly deeper on the low side and provide stronger bass compared to the R3 Meta's min frequency of 58Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R3 Meta is a 4 ohms speaker compared to the R3 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the R3 Meta can provide this impedance level.
On the other hand, they have the same sensitivity of 87 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
R3 Meta and R3 has the same power range of 15-180 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both R3 Meta and R3 features dual binding post speaker terminals for bi-amping or bi-wiring.
KEF R3 Meta's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both R3 Meta and R3 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF R3 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF R3 Meta's and KEF R3's external dimensions. KEF R3 Meta has external dimensions of 423.0 x 202.0 x 337.0mm ( 16-5/8-inch x 7-15/16-inch x 13-1/4-inch) whereas KEF R3 has external dimensions of 423.0 x 199.0 x 337.0mm ( 16-5/8 x 7-13/16 x 13-1/4inch) .
Below you can see the front view size comparison of KEF R3 Meta and KEF R3 in scale.
Comparison image of KEF R3 Meta and KEF R3 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF R3 Meta is approximately 680.7cm2 / 105.5inch2 and base area of the KEF R3 is approximately 670.6cm2 / 103.9inch2. The R3 Meta requires 2% more surface area than the R3 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of KEF R3 Meta and KEF R3 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF R3 Meta weighs 12.41kg / 27.3lbs and the KEF R3 weighs 13.55kg / 29.8lbs. This makes the R3 9% heavier than the R3 Meta.
Here is a comparison of how R3 Meta and R3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF R3 Meta?
Here are the items that are included inside the box of R3 Meta:
1 pair of R3 Meta loudspeakers 1 pair of microfiber grilles Rubber feet Port bungs User manual and warranty information
What's in the Box of KEF R3?
Here are the items that come with the R3:
2 Bookshelf loudspeakers2 Grilles2 Foam port plugs8 Self-adhesive rubber feetUser ManualWarranty Information
 Price per pair* |
2199USD
vs
2200USD
|
costs less (*prices may change depending on the seller, location and time) |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
52 Hz
vs
58 Hz
|
Generates deeper bass |
 Base Surface Area |
670cm2 (199x337mm)
vs
680cm2 (202x337mm)
|
Takes less floor space |
| General |
KEF R3 Meta |
KEF R3 |
| Brand |
KEF |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
15-180 watts |
15-180 watts |
| Sensitivity |
87 dB |
87 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
3.2 ohms |
3.2 ohms |
| Frequency Response |
58-28k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Hybrid Aluminum |
Hybrid aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5" |
5" |
| Crossover Frequency |
420Hz and 2300Hz |
400Hz and 2900Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
423.0mm (16.7") |
| Width |
202.0mm (8") |
199.0mm (7.8") |
| Depth |
337.0mm (13.3") |
337.0mm (13.3") |
| Weight |
12.41kg (27.3lbs) |
13.55kg (29.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Lacquer |
| Available Colors |
Black Gloss, White Gloss, Walnut, Indigo Gloss Special Edition |
Black Gloss, White Gloss, Walnut |
| Mounting Bracket |
No |
No |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |