In this review, we will be comparing Q150 and S20, two Passive Bookshelf speakers from KEF and Polk Audio.
Let's have a brief look at the main features
of KEF Q150 and Polk S20 first before getting into our more
detailed comparison.
| Key Specs | KEF Q150 | Polk S20 |
|---|
| Brand | KEF United Kingdom · founded 1961 | Polk Audio United States · founded 1972 |
|---|
| Design | 2-way | 2-way |
|---|
| Uni-Q driver | 11th Generation Uni-Q | — |
|---|
| Tweeter | 1" Dome | 1" Soft-Dome |
|---|
| Woofer | 5.25" Aluminum | 6.5" Mica-reinforced polypropylene |
|---|
| Frequency response | 51-28k Hz | 39-40k Hz |
|---|
| Sensitivity | 86 dB | 88 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 10-100 watts | 20-125 watts |
|---|
| Weight | 5.60kg / 12.3lbs | 7.73kg / 17lbs |
|---|
| Dimensions (H x W x D) | 11.9" x 7.0" x 10.9" 303.0 x 180.0 x 278.0mm | 14.8" x 8.5" x 13.7" 376.0 x 216.0 x 350.0mm |
|---|
What size room are the KEF Q150 and Polk S20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
KEF Q150 |
Polk S20 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Q150 and S20 are 2-way speakers.
KEF Q150Polk S20
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
KEF Q150 |
Polk S20 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz. On the other hand, the S20 features a 1" Terylene Soft-Dome Tweeter and 1 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Q150 has a frequency range of 51-28k Hz whereas S20 has a frequency range of 39-40k Hz. With a minimum frequency of 39Hz, the S20 can go significantly deeper on the low side and provide stronger bass compared to the Q150's min frequency of 51Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q150 and S20 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Q150 sensitivity is rated at 86 dB and the S20's is at 88 dB. This 2 dB difference makes the Polk S20 a more sensitive speaker compared to KEF Q150, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
S20 can handle a max power of 125 watts RMS, whereas Q150 has a max power handling value of 100 watts RMS, 25 watts less than the S20.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Q150 features 5-way post type posts and S20 has a 5-way post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF Q150's Post terminals
Cabinet Type and Port Position
Both Q150 and S20 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF Q150 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q150's and Polk S20's external dimensions. KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm (11.9 x 7.0 x 10.9inch) whereas Polk S20 has external dimensions of 376.0 x 216.0 x 350.0mm (14.8 x 8.5 x 13.7inch).
Polk S20 is clearly the larger of the two speakers. Its body is 36mm wider, 73mm taller and 72mm deeper than KEF Q150.
Below you can see the front view size comparison of KEF Q150 and Polk S20 in scale.
Comparison image of KEF Q150 and Polk S20 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q150 is approximately 500.4cm2 / 77.6inch2 and base area of the Polk S20 is approximately 756.0cm2 / 117.2inch2. The Q150 requires 34% less surface area than the S20 which gives it a small advantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of KEF Q150 and Polk S20 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF Q150 weighs 5.60kg / 12.3lbs and the Polk S20 weighs 7.73kg / 17lbs. This makes the S20 38% heavier than the Q150.
Here is a comparison of how Q150 and S20's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF Q150?
Here are the items that are included inside the box of Q150:
- 2 Bookshelf loudspeakers
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- Owner's Manual
- Warranty Registration Card
What's in the Box of Polk S20?
Here are the items that come with the S20:
- 2 Bookshelf loudspeakers
- 2 Grilles (attached)
- 8 Self-adhesive rubber feet
- Owners Manual
- Online Product Registration
Height |
303mm
vs
376mm
|
Easier to fit in smaller spaces |
Base Surface Area |
500cm2
vs
756cm2
|
Takes less floor space |
Max Input Power |
125 watts
vs
100 watts
|
Handle more power from your amplifier |
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
39 Hz
vs
51 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Price per pair* |
299USD
vs
600USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF Q150 |
Polk Audio Signature S20 |
| Brand |
KEF |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
10-100 watts |
20-125 watts |
| Sensitivity |
86 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.7 ohms |
n/a |
| Frequency Response |
51-28k Hz |
39-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Aluminum |
Mica-reinforced polypropylene |
| Woofer Surround Material |
Rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
2500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
303.0mm (11.9") |
376.0mm (14.8") |
| Width |
180.0mm (7.1") |
216.0mm (8.5") |
| Depth |
278.0mm (10.9") |
350.0mm (13.8") |
| Weight |
5.60kg (12.3lbs) |
7.73kg (17lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl-wrapped |
Meddite MDF |
| Available Colors |
Black, Walnut, White |
Black, Walnut, Brown Walnut |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
18-24" |
24-28" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - KEF Q150 costs roughly 2x what Polk S20 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | Polk S20 digs deeper - 39Hz against 51Hz. |
| Amplifier needs | B | Polk S20 is more sensitive (88dB vs 86dB), so it goes louder on the same amplifier. |
| Headroom | B | Polk S20 takes more power (125W vs 100W) - more in hand in a big room. |
| Size | depends | KEF Q150 is easier to place; Polk S20 is bigger, which usually goes with fuller bass. Your room decides. |
| Price | B | Polk S20 is cheaper - $299 against $600, about 50% less; arguably a different class. |
A KEF Q150 B Polk S20
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Polk S20 is the easier recommendation: it leads on most of the measured areas and costs less. Take KEF Q150 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 51Hz anyway, so judge these on the other rows instead. Match it to your room: we rate KEF Q150 the better fit for near-field listening and a small room, and Polk S20 for a mid-size room and a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.