In this review, we will be comparing LSX II and A2+ Wireless, two Powered Bookshelf speakers from KEF and Audioengine. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of KEF LSX II and Audioengine A2+ Wireless first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the KEF LSX II and Audioengine A2+ Wireless compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both LSX II and A2+ Wireless are 2-way speakers.
| Driver |
KEF LSX II |
Audioengine A2+ Wireless |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
0.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4.5-inch
|
1 x 2.75-inch
|
LSX II features a 0.75" Aluminum Hard-Dome Tweeter and 1 x 4.5" Magnesium/Aluminium alloy Woofer . On the other hand, the A2+ Wireless features a 0.75" Silk Soft-Dome Tweeter and 1 x 2.75" Kevlar Woofer .
Frequency Response
LSX II has a frequency range of 54-28k Hz whereas A2+ Wireless has a frequency range of 65-22k Hz. With a minimum frequency of 54Hz, the LSX II can go significantly deeper on the low side and provide stronger bass compared to the A2+ Wireless's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
LSX II has a rear firing port whereas A2+ Wireless has a front firing ports. Audioengine A2+ Wireless's front-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF LSX II with its rear-firing port.
KEF LSX II Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LSX II's and Audioengine A2+ Wireless's external dimensions. KEF LSX II has external dimensions of 240 × 155 × 180 mm ( 9.5 × 6.1 × 7.1 inch) whereas Audioengine A2+ Wireless has external dimensions of 158.8 x 106.4 x 168.3mm ( 6.25 x 4.1875 x 6.625inch) .
KEF LSX II is clearly the larger of the two speakers. Its body is 48.6mm wider, 81.2mm taller and 11.7mm deeper than Audioengine A2+ Wireless.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LSX II is approximately 279.0cm2 / 43.2inch2 and base area of the Audioengine A2+ Wireless is approximately 179.1cm2 / 27.8inch2. The LSX II requires 56% more surface area than the A2+ Wireless which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF LSX II weighs 3.60kg / 7.9lbs and the Audioengine A2+ Wireless weighs 1.40kg / 3.1lbs. This makes the LSX II 157% heavier than the A2+ Wireless.
Here is a comparison of how LSX II and A2+ Wireless's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LSX II?
Here are the items that are included inside the box of LSX II:
2 Wireless powered speakersTwo 6.5-feet AC power cords10-feet Cat-6 interconnect speaker cableRemote control2 AAA batteries Quick Start Guide Important Safety Information Warranty Information Maintenance Guide
What's in the Box of Audioengine A2+ Wireless?
Here are the items that come with the A2+ Wireless:
Wireless powered left speakerPassive right speakerAC power supply (w/ attached 6-feet DC cord)6-feet AC power cord6.5-feet Length of 16 gauge speaker wire5-feet microUSB-to-USB cable6-feet Stereo minijack cable2 Cloth drawstring speaker pouches2 Cloth drawstring accessory pouchesQuick Start GuideAudioengine product brochure
 Woofer Size |
4.5 inches
vs
2.75 inches
|
Larger woofer |
| Low Frequency Response |
54 Hz
vs
65 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
22k Hz
|
Generates higher frequency |
 Handheld Remote |
Yes
vs
No
|
Control the speaker by the included RC |
 App-Based Control |
Apple iOS, Android
vs
None
|
Control the speaker via an app |
 Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
 USB Port |
USB-C (connects to your computer)
vs
No
|
USB port adds flexibility |
 Digital Input |
Optical
vs
No
|
Connect digital inputs directly |
 HDMI Input |
ARC
vs
No
|
Connect HDMI sources directly |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
158mm
vs
240mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
179cm2 (106x168mm)
vs
279cm2 (155x180mm)
|
Takes less floor space |
 Price per pair* |
269USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
 RCA Connection |
Yes
vs
No
|
Connection via RCA input |
| General |
KEF LSX II |
Audioengine A2+ Wireless |
| Brand |
KEF |
Audioengine |
| Speaker Type |
Powered Stereo Speakers |
Powered Stereo Speakers |
| Frequency Response |
54-28k Hz |
65-22k Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
30-watt RMS |
| Max Bit Depth |
24-bit |
16-bit |
| Max Sample Rate |
384 kHz |
48 kHz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
4.5" |
2.75" |
| Woofer Composition |
Magnesium/Aluminium alloy |
Kevlar |
| Woofer Surround Material |
Rubber |
n/a |
| Tweeter Size |
0.75" |
0.75" |
| Tweeter Type |
Hard-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
240.0mm (9.4") |
158.8mm (6.3") |
| Width |
155.0mm (6.1") |
106.4mm (4.2") |
| Depth |
180.0mm (7.1") |
168.3mm (6.6") |
| Weight |
3.60kg (7.9lbs) |
1.40kg (3.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Available Colors |
Carbon Black, Mineral White, Cobalt Blue, Lava Red, and Soundwave |
n/a |
| Mounting Bracket |
No |
No |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Aux Inputs |
3.5mm |
3.5mm, RCA |
| USB Port |
USB-C (connects to your computer) |
microUSB |
| Phone Input |
No |
No |
| Subwoofer Output |
Wired |
Wired |
| Digital Input |
Optical |
No |
| HDMI Input |
ARC |
No |
| Headphone Jack |
No |
No |
| Ethernet Port |
Yes |
No |
Other |
|
|
| Parts Warranty |
1 Year |
3 Years |
| Labor Warranty |
1 Year |
3 Years |