In this review, we will be comparing two different type of speakers by KEF. KEF LS60 Wireless is a Floor-standing speaker whereas the LS50 Wireless is a Bookshelf speaker.
Let's have a brief look at the main features
of KEF LS60 Wireless and KEF LS50 Wireless first before getting into our more
detailed comparison.
KEF LS60 Wireless Key Specs
- 3-way Design
- 1400-watt RMS Integrated Amplifier
- 12th Generation Uni-Q Driver
- 0.75" aluminum dome Tweeter
- 4" Midrange
- 4 x 5.25" Uni-Core force-cancelling Woofer
- 31-24k Hz Frequency Response
- 24-bit Max Depth / 384 kHz Max Sample Rate
- Built-in 4.2 Bluetooth
- App Control Feature
- Weight:31.20kg
- Dimensions (H x W x D): 1090.0" x 8.3" x 15.5"( 1090.0 x 212.0 x 394.0mm )
KEF LS50 Wireless Key Specs
- 2-way Design
- 230-watt RMS Integrated Amplifier
- 11th Generation Uni-Q Driver
- 1" Hard-Dome Tweeter
- 5.25" Magnesium/aluminum alloy Woofer
- 79-28k Hz Frequency Response
- 24-bit Max Depth / 192 kHz Max Sample Rate
- Built-in 4.0 Bluetooth
- App Control Feature
- Weight:10.00kg
- Dimensions (H x W x D): 301.6" x 7.875" x 13.25"( 301.6 x 200.0 x 336.5mm )
LS60 Wireless and LS50 Wireless are members of KEF's LS series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the KEF LS60 Wireless and KEF LS50 Wireless compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that LS60 Wireless is a 3-way design whereas the LS50 Wireless is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
KEF LS60 Wireless |
KEF LS50 Wireless |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
- |
|
Woofer
|
4 x 5.25-inch
|
1 x 5.25-inch
|
LS60 Wireless features a 0.75" Aluminum aluminum dome Tweeter , a 4" Midrange and 4 x 5.25" Uni-Core force-cancelling Woofer . On the other hand, the LS50 Wireless features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Magnesium/aluminum alloy Woofer .
Frequency Response
LS60 Wireless has a frequency range of 31-24k Hz whereas LS50 Wireless has a frequency range of 79-28k Hz. With a minimum frequency of 31Hz, the LS60 Wireless can go significantly deeper on the low side and provide stronger bass compared to the LS50 Wireless's min frequency of 79Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both LS60 Wireless and LS50 Wireless have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LS60 Wireless's and KEF LS50 Wireless's external dimensions. KEF LS60 Wireless has external dimensions of 1090.0 x 212.0 x 394.0mm ( 42.9 x 8.3 x 15.5inch) whereas KEF LS50 Wireless has external dimensions of 301.6 x 200.0 x 336.5mm ( 11.875 x 7.875 x 13.25inch) .
KEF LS60 Wireless is clearly the larger of the two speakers. Its body is 12mm wider, 788.4mm taller and 57.5mm deeper than KEF LS50 Wireless.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LS60 Wireless is approximately 835.3cm2 / 129.5inch2 and base area of the KEF LS50 Wireless is approximately 673.0cm2 / 104.3inch2. The LS60 Wireless requires 24% more surface area than the LS50 Wireless which gives it a small disadvantage on placement in tight spaces.
What's in the Box of KEF LS60 Wireless?
Here are the items that are included inside the box of LS60 Wireless:
2 Wireless Speakers Power Cords Interspeaker CableRemote ControlOptional Floor SpikesQuick Start GuideWarranty and Safety Documents
What's in the Box of KEF LS50 Wireless?
Here are the items that come with the LS50 Wireless:
Wireless powered speaker (Right)Wireless powered speaker (Left)Two 6.5-feet AC power cords10-feet Cat-6 interconnect speaker cable6.5-feet USB-B to USB-A cable42