In this review, we will be comparing two different type of speakers by KEF. KEF LS50 Wireless is a Bookshelf speaker whereas the LS50C Meta is a Center Channel speaker.
Let's have a brief look at the main features
of KEF LS50 Wireless and KEF LS50C Meta first before getting into our more
detailed comparison.
LS50 Wireless and LS50C Meta are members of KEF's LS series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the KEF LS50 Wireless and KEF LS50C Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both LS50 Wireless and LS50C Meta are 2-way speakers.
| Driver |
KEF LS50 Wireless |
KEF LS50C Meta |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
LS50 Wireless features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Magnesium/aluminum alloy Woofer . On the other hand, the LS50C Meta features a 1" Aluminum Vented dome Tweeter and 1 x 5.25" aluminum Woofer with a Crossover frequency at 2100Hz.
Frequency Response
LS50 Wireless and LS50C Meta has exactly the same frequency range of 79-28k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both LS50 Wireless and LS50C Meta have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF LS50C Meta off-set flexible Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LS50 Wireless's and KEF LS50C Meta's external dimensions. KEF LS50 Wireless has external dimensions of 301.6 x 200.0 x 336.5mm ( 11.875 x 7.875 x 13.25inch) whereas KEF LS50C Meta has external dimensions of 301.0 x 201.0 x 281.0mm ( 11-13/16 x 7-7/8 x 11-1/16inch) .
KEF LS50C Meta is 0.60000000000002mm shorter and 55.5mm less deeper than KEF LS50 Wireless but it is also 1mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LS50 Wireless is approximately 673.0cm2 / 104.3inch2 and base area of the KEF LS50C Meta is approximately 564.8cm2 / 87.5inch2. The LS50 Wireless requires 19% more surface area than the LS50C Meta which gives it a small disadvantage on placement in tight spaces.
What's in the Box of KEF LS50 Wireless?
Here are the items that are included inside the box of LS50 Wireless:
Wireless powered speaker (Right)Wireless powered speaker (Left)Two 6.5-feet AC power cords10-feet Cat-6 interconnect speaker cable6.5-feet USB-B to USB-A cable42
What's in the Box of KEF LS50C Meta?
Here are the items that come with the LS50C Meta:
Center-channel loudspeakerFoam port plug4 Self-adhesive rubber feetOwners ManualWarranty Registration Card