In this review, we will be comparing S 809 and R-610F, two Passive Floor-standing speakers from Jamo and Klipsch. Let's have a brief look at the main features
of Jamo S 809 and Klipsch R-610F first before getting into our more
detailed comparison.
What size room are the Jamo S 809 and Klipsch R-610F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo S 809 and Klipsch R-610F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S 809 and R-610F are 2-way speakers.
| Driver |
Jamo S 809 |
Klipsch R-610F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.0-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
3 x 5-inch
|
1 x 6.5-inch
|
S 809 features a 1" Tweeter and 3 x 5" Aluminized Polyfiber Woofer with a Crossover frequency at 2000Hz. On the other hand, the R-610F features a 1.0" Tweeter and 1 x 6.5" Copper-spun IMG Woofer .
Frequency Response
S 809 has a frequency range of 37-26k Hz whereas R-610F has a frequency range of 45-21k Hz. With a minimum frequency of 37Hz, the S 809 can go significantly deeper on the low side and provide stronger bass compared to the R-610F's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S 809 and R-610F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S 809 sensitivity is rated at 90 dB and the R-610F's is at 94 dB. This 4 dB difference makes the Klipsch R-610F a more sensitive speaker compared to Jamo S 809, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S 809 can handle a max power of 120 watts RMS from the amp the whereas R-610F has a max power handling value of 85 watts RMS, 35 watts less than the S 809.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S 809 features Post type posts and R-610F has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Jamo S 809's Post terminals
Klipsch R-610F's Post terminals
Cabinet Type and Port Position
S 809 has a front firing port whereas R-610F has a rear firing ports. Jamo S 809's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch R-610F with its rear-firing port.
Jamo S 809 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo S 809's and Klipsch R-610F's external dimensions. Jamo S 809 has external dimensions of 1042.0 x 191.0 x 252.0mm ( 41.0 x 7.5 x 9.9inch) whereas Klipsch R-610F has external dimensions of 942.0 x 239.0 x 369.0mm ( 37-1/16 x 9-3/8 x 14-1/2inch) .
Jamo S 809 is 48mm narrower and 117mm less deeper than Klipsch R-610F but it is also 100mm taller.
Below you can see the front view size comparison of Jamo S 809 and Klipsch R-610F in scale.
Comparison image of Jamo S 809 and Klipsch R-610F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo S 809 is approximately 481.3cm2 / 74.6inch2 and base area of the Klipsch R-610F is approximately 881.9cm2 / 136.7inch2. The S 809 requires 45% less surface area than the R-610F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo S 809 weighs 13.60kg / 29.9lbs and the Klipsch R-610F weighs 16.36kg / 36lbs. This makes the R-610F 20% heavier than the S 809.
Here is a comparison of how S 809 and R-610F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Jamo S 809?
Here are the items that are included inside the box of S 809:
2 Floorstanding loudspeakers2 Grilles8 Mounting feet16 ScrewsUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch R-610F?
Here are the items that come with the R-610F:
Floorstanding loudspeakerGrille (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 Max Input Power |
120 watts
vs
85 watts
|
Handle more power from your amplifier |
 Number of Woofers |
3
vs
1
|
More woofers |
| Low Frequency Response |
37 Hz
vs
45 Hz
|
Generates deeper bass |
 High Frequency Response |
26k Hz
vs
21k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Dolby Atmos Drivers |
Optional Jamo S 8 ATM Dolby Atmos upward-firing speakers
vs
No
|
Dolby Atmos Compatibility |
 Base Surface Area |
481cm2 (191x252mm)
vs
881cm2 (239x369mm)
|
Takes less floor space |
 Price per pair* |
634USD
vs
778USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
94 dB
vs
90 dB
|
Play louder with same amount of amplification power |
| Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
 Height |
942mm
vs
1042mm
|
Easier to fit in smaller spaces |
| General |
Jamo Studio S 809 |
Klipsch Reference R-610F |
| Brand |
Jamo |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
120 watts |
up to 85 watts |
| Sensitivity |
90 dB |
94 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
37-26k Hz |
45-21k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
1 |
| Woofer Size |
5" |
6.5" |
| Woofer Composition |
Aluminized Polyfiber |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.0" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2000Hz |
n/a |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
1042.0mm (41") |
942.0mm (37.1") |
| Width |
191.0mm (7.5") |
239.0mm (9.4") |
| Depth |
252.0mm (9.9") |
369.0mm (14.5") |
| Weight |
13.60kg (29.9lbs) |
16.36kg (36lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |