In this review, we will be comparing S 807 and R-620F, two Passive Floor-standing speakers from Jamo and Klipsch. Let's have a brief look at the main features
of Jamo S 807 and Klipsch R-620F first before getting into our more
detailed comparison.
What size room are the Jamo S 807 and Klipsch R-620F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo S 807 and Klipsch R-620F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S 807 and R-620F are 2-way speakers.
| Driver |
Jamo S 807 |
Klipsch R-620F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.0-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5-inch
|
2 x 6.5-inch
|
S 807 features a 1" Tweeter and 2 x 5" Aluminized Polyfiber Woofer with a Crossover frequency at 2000Hz. On the other hand, the R-620F features a 1.0" Tweeter and 2 x 6.5" Copper-spun IMG Woofer with a Crossover frequency at 2000Hz.
Frequency Response
S 807 has a frequency range of 42-26k Hz whereas R-620F has a frequency range of 38-21k Hz. With a minimum frequency of 38Hz, the R-620F can go slightly deeper then the S 807's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S 807 and R-620F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S 807 sensitivity is rated at 90 dB and the R-620F's is at 96 dB. This 6 dB difference makes the Klipsch R-620F a more sensitive speaker compared to Jamo S 807, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S 807 and R-620F has the same power range of up to 100 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S 807 features Post type posts and R-620F has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Jamo S 807's Binding post terminals
Klipsch R-620F's Post terminals
Cabinet Type and Port Position
S 807 has a front firing port whereas R-620F has a rear firing ports. Jamo S 807's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch R-620F with its rear-firing port.
Jamo S 807 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo S 807's and Klipsch R-620F's external dimensions. Jamo S 807 has external dimensions of 915.0 x 191.0 x 252.0mm ( 36-1/2 x 10-1/8 x 10-9/16inch) whereas Klipsch R-620F has external dimensions of 1021.0 x 239.0 x 369.0mm ( 40-3/16 x 9-3/8 x 14-1/2inch) .
Klipsch R-620F is clearly the larger of the two speakers. Its body is 48mm wider, 106mm taller and 117mm deeper than Jamo S 807.
Below you can see the front view size comparison of Jamo S 807 and Klipsch R-620F in scale.
Comparison image of Jamo S 807 and Klipsch R-620F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo S 807 is approximately 481.3cm2 / 74.6inch2 and base area of the Klipsch R-620F is approximately 881.9cm2 / 136.7inch2. The S 807 requires 45% less surface area than the R-620F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo S 807 weighs 11.80kg / 26lbs and the Klipsch R-620F weighs 18.64kg / 41lbs. This makes the R-620F 58% heavier than the S 807.
Here is a comparison of how S 807 and R-620F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Jamo S 807?
Here are the items that are included inside the box of S 807:
2 Floorstanding loudspeakers2 Grilles8 Mounting feet16 ScrewsUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch R-620F?
Here are the items that come with the R-620F:
Floorstanding loudspeaker Grille (installed) 2 Feet 4 Screws Quick Setup Guide Important Safety Instructions Warranty Information Loudspeaker Feet note
 High Frequency Response |
26k Hz
vs
21k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Dolby Atmos Drivers |
Optional Jamo S 8 ATM Dolby Atmos upward-firing speakers
vs
No
|
Dolby Atmos Compatibility |
 Height |
915mm
vs
1021mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
481cm2 (191x252mm)
vs
881cm2 (239x369mm)
|
Takes less floor space |
 Price per pair* |
519USD
vs
998USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
| Low Frequency Response |
38 Hz
vs
42 Hz
|
Generates deeper bass |
| General |
Jamo Studio S 807 |
Klipsch Reference R-620F |
| Brand |
Jamo |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 100 watts |
up to 100 watts |
| Sensitivity |
90 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
42-26k Hz |
38-21k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5" |
6.5" |
| Woofer Composition |
Aluminized Polyfiber |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.0" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2000Hz |
2000Hz |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
915.0mm (36") |
1021.0mm (40.2") |
| Width |
191.0mm (7.5") |
239.0mm (9.4") |
| Depth |
252.0mm (9.9") |
369.0mm (14.5") |
| Weight |
11.80kg (26lbs) |
18.64kg (41lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |