In this review, we will be comparing Studio 620 and RP-600M, two Passive Bookshelf speakers from JBL and Klipsch.
Let's have a brief look at the main features
of JBL Studio 620 and Klipsch RP-600M first before getting into our more
detailed comparison.
| Key Specs | JBL Studio 620 | Klipsch RP-600M |
|---|
| Brand | JBL
United States · founded 1946 | Klipsch
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" High Frequency Compression | 1" Tractrix Horn |
|---|
| Woofer | 5.25" PolyPlas | 6.5" Cerametallic |
|---|
| Frequency response | 50-40k Hz | 45-25k Hz |
|---|
| Sensitivity | 84 dB | 96 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 100 watts | up to 100 watts |
|---|
| Weight | 6.88kg / 15.1lbs | 7.30kg / 16.1lbs |
|---|
| Dimensions (H x W x D) | 12.3" x 7-1/2" x 9-1/2"
312.0 x 190.0 x 240.0mm | 15.7" x 7.9" x 11.8"
399.0 x 202.0 x 301.0mm |
|---|
What size room are the JBL Studio 620 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
JBL Studio 620 |
Klipsch RP-600M |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Studio 620 and RP-600M are 2-way speakers.
JBL Studio 620Klipsch RP-600M
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
JBL Studio 620 |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Studio 620 features a 1" High Frequency Compression Tweeter and 1 x 5.25" PolyPlas Woofer. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Studio 620 has a frequency range of 50-40k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 45Hz, the RP-600M can go significantly deeper on the low side and provide stronger bass compared to the Studio 620's min frequency of 50Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Studio 620 is a 6 ohms speaker compared to the RP-600M which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Studio 620 sensitivity is rated at 84 dB and the RP-600M's is rated at 96 dB. This 12 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to JBL Studio 620, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Studio 620 and RP-600M have the same power range of up to 100 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. Studio 620 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Studio 620 and RP-600M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Studio 620's and Klipsch RP-600M's external dimensions. JBL Studio 620 has external dimensions of 312.0 x 190.0 x 240.0mm (12.3 x 7-1/2inch x 9-1/2inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm (15.7 x 7.9 x 11.8inch).
Klipsch RP-600M is clearly the larger of the two speakers. Its body is 12mm wider, 87mm taller and 61mm deeper than JBL Studio 620.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL Studio 620 is approximately 456.0cm2 / 70.7inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Studio 620 requires 25% less surface area than the RP-600M which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The JBL Studio 620 weighs 6.88kg / 15.1lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs. This makes the RP-600M 6% heavier than the Studio 620.
Here is a comparison of how Studio 620 and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of JBL Studio 620?
Here are the items that are included inside the box of Studio 620:
- 2 x JBL Studio 630 Bookshelf Loudspeaker
- 1 x Owner’s Manual
- 1 x Warranty Card
- 8 x Feet Pads
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
- 2 Bookshelf loudspeakers
- 2 Grilles (installed)
- 8 Self-adhesive rubber feet
- 4 Terminal jumpers (installed)
- User Manual
- Important Safety Instructions
- Warranty Information
 High Frequency Response |
40k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
312mm
vs
399mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
456cm2
vs
608cm2
|
Takes less floor space |
 Sensitivity |
96 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
|
Low Frequency Response |
45 Hz
vs
50 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Price per pair* |
459USD
vs
600USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
JBL Studio 620 |
Klipsch Reference Premiere RP-600M |
| Brand |
JBL |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
up to 100 watts |
up to 100 watts |
| Sensitivity |
84 dB |
96 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
50-40k Hz |
45-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
PolyPlas |
Cerametallic |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
High Frequency Compression |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
1500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
312.0mm (12.3") |
399.0mm (15.7") |
| Width |
190.0mm (7.5") |
202.0mm (8") |
| Depth |
240.0mm (9.4") |
301.0mm (11.9") |
| Weight |
6.88kg (15.1lbs) |
7.30kg (16.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood-grain vinyl |
| Available Colors |
Wood, Dark Wood |
Ebony, Walnut, Piano Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
n/a |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | B | Klipsch RP-600M digs deeper - 45Hz against 50Hz. A subwoofer would even that out. |
| Amplifier needs | B | Klipsch RP-600M is more sensitive (96dB vs 84dB), so it goes louder on the same amplifier. |
| Amplifier match | B | Klipsch RP-600M is the easier load at 8 ohms. |
| Headroom | evenly matched | Similar power handling (100W vs 100W). |
| Size | depends | JBL Studio 620 is easier to place; Klipsch RP-600M is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | B | Klipsch RP-600M: bi-amping. |
| Price | B | Klipsch RP-600M is cheaper - $459 against $600, about 24% less. |
A JBL Studio 620 B Klipsch RP-600M
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch RP-600M is the easier recommendation: it leads on most of the measured areas and costs less. Take JBL Studio 620 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 50Hz anyway, so judge these on the other rows instead. In a large or open-plan room, Klipsch RP-600M has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, JBL Studio 620 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.