In this review, we will be comparing L82 Classic and L100 Classic, two Passive Bookshelf speakers by JBL Let's have a brief look at the main features
of JBL L82 Classic and JBL L100 Classic first before getting into our more
detailed comparison.
L82 Classic and L100 Classic are members of JBL's L Classic series of speakers. Below you can find the loudspeakers from this series.
JBL L Classic Series History
What size room are the JBL L82 Classic and JBL L100 Classic speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the JBL L82 Classic and JBL L100 Classic compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that L82 Classic is a 2-way design whereas the L100 Classic is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
JBL L82 Classic |
JBL L100 Classic |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
1 x 8-inch
|
1 x 12-inch
|
L82 Classic features a 1" Titanium Dome Tweeter and 1 x 8" Pulp Woofer with a Crossover frequency at 1700Hz. On the other hand, the L100 Classic features a 1" Titanium Dome Tweeter , a 5.25" Midrange and 1 x 12" Pulp Woofer with a Crossover frequency at 450Hz and 3500Hz.
Frequency Response
L82 Classic has a frequency range of 44-40k Hz whereas L100 Classic has a frequency range of 40-40k Hz. With a minimum frequency of 40Hz, the L100 Classic can go slightly deeper then the L82 Classic's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
L82 Classic is a 8 ohms speaker compared to the L100 Classic which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L100 Classic can provide this impedance level.
These two speakers also have different sensitivity levels. L82 Classic sensitivity is rated at 88 dB and the L100 Classic's is rated at 90 dB. This 2 dB difference makes the JBL L100 Classic a more sensitive speaker compared to JBL L82 Classic, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
L82 Classic can handle a max power of 200 watts RMS from the amp the whereas L82 Classic has a max power handling value of 125 watts RMS , 75 watts less than the L100 Classic.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
L82 Classic features Five-way gold-plated binding posts type posts and L100 Classic has a Five-way gold-plated binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
JBL L82 Classic's Five-way gold-plated binding posts terminals
JBL L100 Classic's Five-way gold-plated binding posts terminals
Cabinet Type and Port Position
Both L82 Classic and L100 Classic have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL L82 Classic's and JBL L100 Classic's external dimensions. JBL L82 Classic has external dimensions of 472.8 x 281.0 x 315.5mm ( 18.6 x 11.0 x 12.4inch) whereas JBL L100 Classic has external dimensions of 636.5 x 389.6 x 371.5mm ( 25.0 x 15.3 x 14.6inch) .
JBL L100 Classic is clearly the larger of the two speakers. Its body is 108.6mm wider, 163.7mm taller and 56mm deeper than JBL L82 Classic.
Below you can see the front view size comparison of JBL L82 Classic and JBL L100 Classic in scale.
Comparison image of JBL L82 Classic and JBL L100 Classic Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL L82 Classic is approximately 886.6cm2 / 137.4inch2 and base area of the JBL L100 Classic is approximately 1447.4cm2 / 224.3inch2. The L82 Classic requires 39% less surface area than the L100 Classic which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The JBL L82 Classic weighs 12.80kg / 28.2lbs and the JBL L100 Classic weighs 26.70kg / 58.7lbs. This makes the L100 Classic 109% heavier than the L82 Classic.
Here is a comparison of how L82 Classic and L100 Classic's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of JBL L82 Classic?
Here are the items that are included inside the box of L82 Classic:
Bookshelf loudspeaker
Grille
Owner's Manual
What's in the Box of JBL L100 Classic?
Here are the items that come with the L100 Classic:
Bookshelf loudspeaker
Grille
Owner's Manual
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Height |
472mm
vs
636mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
886cm2 (281x315mm)
vs
1447cm2 (389x371mm)
|
Takes less floor space |
 Price per pair* |
2750USD
vs
4400USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
200 watts
vs
125 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
40 Hz
vs
44 Hz
|
Generates deeper bass |
| General |
JBL L82 Classic |
JBL L100 Classic |
| Brand |
JBL |
JBL |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-125 watts |
25-200 watts |
| Sensitivity |
88 dB |
90 dB |
| Impedance |
8 ohms |
4 ohms |
| Frequency Response |
44-40k Hz |
40-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
12" |
| Woofer Composition |
Pulp |
Pulp |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5.25" |
| Crossover Frequency |
1700Hz |
450Hz and 3500Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
472.8mm (18.6") |
636.5mm (25.1") |
| Width |
281.0mm (11.1") |
389.6mm (15.3") |
| Depth |
315.5mm (12.4") |
371.5mm (14.6") |
| Weight |
12.80kg (28.2lbs) |
26.70kg (58.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
Genuine walnut veneer |
| Available Colors |
Walnut |
Walnut |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
15.5" |
18" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |