In this review, we will be comparing P3ESR XD2 and 607 S2 AE, two Passive Bookshelf speakers from Harbeth and Bowers Wilkins.
Let's have a brief look at the main features
of Harbeth P3ESR XD2 and B&W 607 S2 first before getting into our more
detailed comparison.
| Key Specs | Harbeth P3ESR XD2 | B&W 607 S2 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 0.75" Dome | 1" Decoupled Double Dome |
|---|
| Woofer | 4.5" RADIAL | 5" Continuum |
|---|
| Frequency response | 75-20k Hz | 52-28k Hz |
|---|
| Sensitivity | 83 dB | 84 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | 15-50 watts | 30-100 watts |
|---|
| Weight | 6.10kg / 13.4lbs | 4.70kg / 10.3lbs |
|---|
| Dimensions (H x W x D) | 12-1/16" x 7-1/2" x 7-1/4"
306.0 x 190.0 x 184.0mm | 11-13/16" x 6-1/2" x 9-1/8"
301.0 x 166.0 x 232.0mm |
|---|
What size room are the Harbeth P3ESR XD2 and B&W 607 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Harbeth P3ESR XD2 |
B&W 607 S2 |
| Near-field |
Good |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both P3ESR XD2 and 607 S2 AE are 2-way speakers.
Harbeth P3ESR XD2B&W 607 S2
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Harbeth P3ESR XD2 |
B&W 607 S2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4.5-inch
|
1 x 5-inch
|
P3ESR XD2 features a 0.75" Ferrofluid-cooled dome Dome Tweeter and 1 x 4.5" RADIAL Woofer. On the other hand, the 607 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 5" Continuum Woofer.
Frequency Response
P3ESR XD2 has a frequency range of 75-20k Hz whereas 607 S2 AE has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the 607 S2 AE can go significantly deeper on the low side and provide stronger bass compared to the P3ESR XD2's min frequency of 75Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
P3ESR XD2 is a 6 ohms speaker compared to the 607 S2 AE which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. P3ESR XD2 sensitivity is rated at 83 dB and the 607 S2 AE's is rated at 84 dB. This 1 dB difference makes the B&W 607 S2 a more sensitive speaker compared to Harbeth P3ESR XD2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
607 S2 AE can handle a max power of 100 watts RMS, whereas P3ESR XD2 has a max power handling value of 50 watts RMS, 50 watts less than the 607 S2 AE.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
607 S2 AE features Binding post posts which make bi-amping or bi-wiring possible. P3ESR XD2 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 607 S2's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Harbeth P3ESR XD2's and B&W 607 S2's external dimensions. Harbeth P3ESR XD2 has external dimensions of 306.0 x 190.0 x 184.0mm (12-1/16 x 7-1/2 x 7-1/4inch) whereas B&W 607 S2 has external dimensions of 301.0 x 166.0 x 232.0mm (11-13/16 x 6-1/2 x 9-1/8inch).
B&W 607 S2 is 24mm narrower and 5mm shorter than Harbeth P3ESR XD2 but it is also 48mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Harbeth P3ESR XD2 is approximately 349.6cm2 / 54.2inch2 and base area of the B&W 607 S2 is approximately 385.1cm2 / 59.7inch2. The P3ESR XD2 requires 9% less surface area than the 607 S2 AE which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Harbeth P3ESR XD2 weighs 6.10kg / 13.4lbs and the B&W 607 S2 weighs 4.70kg / 10.3lbs. This makes the P3ESR XD2 30% heavier than the 607 S2 AE.
Here is a comparison of how P3ESR XD2 and 607 S2 AE's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 607 S2?
Here are the items that come with the 607 S2 AE:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Two-piece foam port plugs
- 8 Self-adhesive rubber feet
- 4 Jumper-straps (pre-installed)
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Base Surface Area |
349cm2
vs
385cm2
|
Takes less floor space |
 Max Input Power |
100 watts
vs
50 watts
|
Handle more power from your amplifier |
 Sensitivity |
84 dB
vs
83 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
5 inches
vs
4.5 inches
|
Larger woofer |
|
Low Frequency Response |
52 Hz
vs
75 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
20k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
301mm
vs
306mm
|
Easier to fit in smaller spaces |
 Price per pair* |
799USD
vs
3790USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Harbeth P3ESR XD2 |
Bowers & Wilkins 607 S2 Anniversary Edition |
| Brand |
Harbeth |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
15-50 watts |
30-100 watts |
| Sensitivity |
83 dB |
84 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
n/a |
3.0 ohms |
| Frequency Response |
75-20k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
4.5" |
5" |
| Woofer Composition |
RADIAL |
Continuum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
0.75" |
1" |
| Tweeter Type |
Dome |
Decoupled Double Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
306.0mm (12") |
301.0mm (11.9") |
| Width |
190.0mm (7.5") |
166.0mm (6.5") |
| Depth |
184.0mm (7.2") |
232.0mm (9.1") |
| Weight |
6.10kg (13.4lbs) |
4.70kg (10.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Vinyl |
| Available Colors |
n/a |
Matte Black, Matte White, Oak, Red Cherry |
| Mounting Bracket |
|
No |
| Recommended Stand Height |
n/a |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - Harbeth P3ESR XD2 costs roughly 4.7x what B&W 607 S2 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass |
B |
B&W 607 S2 digs deeper - 52Hz against 75Hz. |
| Amplifier needs |
evenly matched |
Similar sensitivity (83dB vs 84dB) - both want much the same power. |
| Amplifier match |
B |
B&W 607 S2 is the easier load at 8 ohms. |
| Headroom |
B |
B&W 607 S2 takes more power (100W vs 50W) - more in hand in a big room. |
| Size |
depends |
Similar cabinet size - neither is easier to fit. |
| Expandability |
B |
B&W 607 S2: bi-amping. |
| Price |
B |
B&W 607 S2 is cheaper - $799 against $3,790, about 79% less; arguably a different class. |
A Harbeth P3ESR XD2
B B&W 607 S2
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W 607 S2 is the easier recommendation: it leads on most of the measured areas and costs less. Take Harbeth P3ESR XD2 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 75Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Harbeth P3ESR XD2 the better fit for near-field listening; elsewhere the two are rated the same.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.