In this review, we will be comparing BRX and BW 606, two Passive Bookshelf speakers from GoldenEar and Bowers Wilkins. Let's have a brief look at the main features
of GoldenEar BRX and B&W 606 first before getting into our more
detailed comparison.
What size room are the GoldenEar BRX and B&W 606 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the GoldenEar BRX and B&W 606 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both BRX and BW 606 are 2-way speakers.
| Driver |
GoldenEar BRX |
B&W 606 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 6.5-inch
|
BRX features a " Folded Ribbon Tweeter and 1 x 6" Polypropylene Woofer . On the other hand, the BW 606 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
BRX has a frequency range of 40-35k Hz whereas BW 606 has a frequency range of 52-28k Hz. With a minimum frequency of 40Hz, the BRX can go significantly deeper on the low side and provide stronger bass compared to the BW 606's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
BRX and BW 606 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. BRX sensitivity is rated at 90 dB and the BW 606's is at 88 dB. This 2 dB difference makes the GoldenEar BRX a more sensitive speaker compared to B&W 606, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
BRX can handle a max power of 250 watts RMS from the amp the whereas BW 606 has a max power handling value of 120 watts RMS, 130 watts less than the BRX.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
BW 606 features Post posts which make bi-amping or bi-wiring possible. BRX has a 5-way post which doesn't feature bi-amping/bi-wiring.
GoldenEar BRX's 5-way post terminals
B&W 606's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both BRX and BW 606 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare GoldenEar BRX's and B&W 606's external dimensions. GoldenEar BRX has external dimensions of 308.0 x 207.0 x 313.0mm ( 12-1/8 x 8-1/8 x 12-5/16inch) whereas B&W 606 has external dimensions of 345.0 x 190.0 x 324.0mm ( 13.5 x 7.4 x 12.7inch) .
GoldenEar BRX is 37mm shorter and 11mm less deeper than B&W 606 but it is also 17mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the GoldenEar BRX is approximately 647.9cm2 / 100.4inch2 and base area of the B&W 606 is approximately 615.6cm2 / 95.4inch2. The BRX requires 5% more surface area than the BW 606 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The GoldenEar BRX weighs 5.45kg / 12lbs and the B&W 606 weighs 6.90kg / 15.2lbs. This makes the BW 606 27% heavier than the BRX.
Here is a comparison of how BRX and BW 606's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of GoldenEar BRX?
Here are the items that are included inside the box of BRX:
Bookshelf loudspeaker
Grille
Owner's Manual
What's in the Box of B&W 606?
Here are the items that come with the BW 606:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps (pre-installed)ManualBowers & Wilkins brochureWarranty Information
 Max Input Power |
250 watts
vs
120 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
40 Hz
vs
52 Hz
|
Generates deeper bass |
 High Frequency Response |
35k Hz
vs
28k Hz
|
Generates higher frequency |
 Passive Radiator |
two rectangular side-mounted
vs
None
|
Increases the bass performance |
 Height |
308mm
vs
345mm
|
Easier to fit in smaller spaces |
| Woofer Size |
6.5 inches
vs
6 inches
|
Larger woofer |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Base Surface Area |
615cm2 (190x324mm)
vs
647cm2 (207x313mm)
|
Takes less floor space |
 Price per pair* |
899USD
vs
1598USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
GoldenEar BRX |
Bowers & Wilkins 606 |
| Brand |
GoldenEar |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-250 watts |
30-120 watts |
| Sensitivity |
90 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.7 ohms |
| Frequency Response |
40-35k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6" |
6.5" |
| Woofer Composition |
Polypropylene |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
- |
1" |
| Tweeter Type |
Folded Ribbon |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
n/a |
allow up to a week for the temperature effects to stabilise and 15 hours of average use for the parts to attain their intended design characteristics. |
Physical Specs |
|
|
| Height |
308.0mm (12.1") |
345.0mm (13.6") |
| Width |
207.0mm (8.1") |
190.0mm (7.5") |
| Depth |
313.0mm (12.3") |
324.0mm (12.8") |
| Weight |
5.45kg (12lbs) |
6.90kg (15.2lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
MDF/Lacquer |
MDF/Vinyl |
| Available Colors |
Gloss Black |
Black, White, Oak |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |