In this review, we will be comparing Genelec G Two and Genelec G One, two Powered Bookshelf speakers by Genelec Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Genelec G Two and Genelec G One first before getting into our more
detailed comparison.
Genelec G Two Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 0.75" Dome Tweeter
- 4.1" Cone Woofer
- 62-20k Hz Frequency Response
- N/A Max Depth / N/A Max Sample Rate
- Weight:3.20kg
- Dimensions (H x W x D): 242.0" x 5.9" x 5.6"( 242 x 151 x 142 mm )
Genelec G One Key Specs
- 2-way Design
- 50-watt RMS Integrated Amplifier
- 0.75" Dome Tweeter
- 3" Cone Woofer
- 74-20k Hz Frequency Response
- N/A Max Depth / N/A Max Sample Rate
- Weight:1.70kg
- Dimensions (H x W x D): 195.0" x 4.8" x 4.5"( 195 x 121 x 115 mm )
Genelec G Two and Genelec G One are members of Genelec's G series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the Genelec G Two and Genelec G One compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Genelec G Two and Genelec G One are 2-way speakers.
| Driver |
Genelec G Two |
Genelec G One |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
0.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4.1-inch
|
1 x 3-inch
|
Genelec G Two features a 0.75" Dome Tweeter and 1 x 4.1" Cone Woofer with a Crossover frequency at 3000Hz. On the other hand, the Genelec G One features a 0.75" Dome Tweeter and 1 x 3" Cone Woofer with a Crossover frequency at 3000Hz.
Frequency Response
Genelec G Two has a frequency range of 62-20k Hz whereas Genelec G One has a frequency range of 74-20k Hz. With a minimum frequency of 62Hz, the Genelec G Two can go significantly deeper on the low side and provide stronger bass compared to the Genelec G One's min frequency of 74Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both Genelec G Two and Genelec G One have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Genelec G Two's and Genelec G One's external dimensions. Genelec G Two has external dimensions of 242 x 151 x 142 mm ( 9.5 x 5.9 x 5.6) whereas Genelec G One has external dimensions of 195 x 121 x 115 mm ( 7.1 x 4.8 x 4.5) .
Genelec G Two is clearly the larger of the two speakers. Its body is 30mm wider, 47mm taller and 27mm deeper than Genelec G One.
Below you can see the front view size comparison of Genelec G Two and Genelec G One in scale.
Comparison image of Genelec G Two and Genelec G One Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Genelec G Two is approximately 214.4cm2 / 33.2inch2 and base area of the Genelec G One is approximately 139.2cm2 / 21.6inch2. The Genelec G Two requires 54% more surface area than the Genelec G One which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Genelec G Two and Genelec G One on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Genelec G Two weighs 3.20kg / 7lbs and the Genelec G One weighs 1.70kg / 3.7lbs. This makes the Genelec G Two 88% heavier than the Genelec G One.
Here is a comparison of how Genelec G Two and Genelec G One's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Genelec G Two?
Here are the items that are included inside the box of Genelec G Two:
Genelec G Two 2-Way Powered Bookshelf Speaker (Polar White, Single)Iso-Pod Stand5.9-feet Power Cable
What's in the Box of Genelec G One?
Here are the items that come with the Genelec G One:
Genelec G One 2-Way Powered Bookshelf Speaker (Polar White, Single)Iso-Pod Stand5.9-feet Power Cable