In this review, we will be comparing Genelec G Three and Genelec G Four, two Powered Bookshelf speakers by Genelec Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Genelec G Three and Genelec G Four first before getting into our more
detailed comparison.
Genelec G Three Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 0.75" Dome Tweeter
- 5.1" Cone Woofer
- 54-20k Hz Frequency Response
- N/A Max Depth / N/A Max Sample Rate
- Weight:5.00kg
- Dimensions (H x W x D): 299.0" x 7.4" x 7"( 299 x 189 x 178 mm )
Genelec G Four Key Specs
- 2-way Design
- 180-watt RMS Integrated Amplifier
- 0.75" Dome Tweeter
- 6.5" Cone Woofer
- 48-20k Hz Frequency Response
- N/A Max Depth / N/A Max Sample Rate
- Weight:8.60kg
- Dimensions (H x W x D): 365.0" x 9.3" x 8.8"( 365 x 237 x 223 mm )
Genelec G Three and Genelec G Four are members of Genelec's G series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the Genelec G Three and Genelec G Four compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Genelec G Three and Genelec G Four are 2-way speakers.
| Driver |
Genelec G Three |
Genelec G Four |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
0.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.1-inch
|
1 x 6.5-inch
|
Genelec G Three features a 0.75" Dome Tweeter and 1 x 5.1" Cone Woofer with a Crossover frequency at 3000Hz. On the other hand, the Genelec G Four features a 0.75" Dome Tweeter and 1 x 6.5" Cone Woofer with a Crossover frequency at 3000Hz.
Frequency Response
Genelec G Three has a frequency range of 54-20k Hz whereas Genelec G Four has a frequency range of 48-20k Hz. With a minimum frequency of 48Hz, the Genelec G Four can go significantly deeper on the low side and provide stronger bass compared to the Genelec G Three's min frequency of 54Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both Genelec G Three and Genelec G Four have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Genelec G Three's and Genelec G Four's external dimensions. Genelec G Three has external dimensions of 299 x 189 x 178 mm ( 11.8 x 7.4 x 7) whereas Genelec G Four has external dimensions of 365 x 237 x 223 mm ( 13.8 x 9.3 x 8.8) .
Genelec G Four is clearly the larger of the two speakers. Its body is 48mm wider, 66mm taller and 45mm deeper than Genelec G Three.
Below you can see the front view size comparison of Genelec G Three and Genelec G Four in scale.
Comparison image of Genelec G Three and Genelec G Four Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Genelec G Three is approximately 336.4cm2 / 52.1inch2 and base area of the Genelec G Four is approximately 528.5cm2 / 81.9inch2. The Genelec G Three requires 36% less surface area than the Genelec G Four which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Genelec G Three and Genelec G Four on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Genelec G Three weighs 5.00kg / 11lbs and the Genelec G Four weighs 8.60kg / 18.9lbs. This makes the Genelec G Four 72% heavier than the Genelec G Three.
Here is a comparison of how Genelec G Three and Genelec G Four's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Genelec G Three?
Here are the items that are included inside the box of Genelec G Three:
Genelec G Three 2-Way Powered Bookshelf Speaker (Polar White, Single)Iso-Pod Stand5.9-feet Power Cable
What's in the Box of Genelec G Four?
Here are the items that come with the Genelec G Four:
Genelec G Four 2-Way Powered Bookshelf Speaker (Polar White, Single)Iso-Pod Stand5.9-feet Power Cable