In this review, we will be comparing F702 and Motion XT F200, two Passive Floor-standing speakers from Fyne Audio and MartinLogan.
Let's have a brief look at the main features
of Fyne Audio F702 and MartinLogan Motion XT F200 first before getting into our more
detailed comparison.
| Key Specs | Fyne Audio F702 | MartinLogan Motion XT F200 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | — | 1.25 x 2.4" Folded Motion XT |
|---|
| Midrange | — | 6.5" |
|---|
| Woofer | — | 3 x 8" Aluminum |
|---|
| Frequency response | 30-34k Hz | 27-25k Hz |
|---|
| Sensitivity | 92 dB | 92 dB |
|---|
| Impedance | 8 ohms | 4 ohms |
|---|
| Power range | — | 20-600 watts |
|---|
| Weight | 30.48kg / 67.1lbs | 39.00kg / 85.8lbs |
|---|
| Dimensions (H x W x D) | 43.7" x 15.1" x 17.3"
1110.0 x 383.5 x 439.4mm | 50-3/4" x 13-3/4" x 16-1/2"
1289 x 349 x 419mm |
|---|
What size room are the Fyne Audio F702 and MartinLogan Motion XT F200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Fyne Audio F702 |
MartinLogan Motion XT F200 |
| Near-field |
Bad |
Are you nuts? |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both F702 and Motion XT F200 are 3-way speakers.
| Driver |
Fyne Audio F702 |
MartinLogan Motion XT F200 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
-inch
|
1.25 x 2.4-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
x -inch
|
3 x 8-inch
|
F702 features a " Tweeter and x " Woofer with a Crossover frequency at 250 Hz, 1700 Hz. On the other hand, the Motion XT F200 features a 1.25 x 2.4" Folded Motion XT Tweeter, a 6.5" Midrange and 3 x 8" Aluminum Woofer with a Crossover frequency at 300Hz and 2600Hz.
Frequency Response
F702 has a frequency range of 30-34k Hz whereas Motion XT F200 has a frequency range of 27-25k Hz. With a minimum frequency of 27Hz, the Motion XT F200 can go slightly deeper then the F702's min frequency of 30Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
F702 is a 8 ohms speaker compared to the Motion XT F200 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion XT F200 can provide this impedance level.
On the other hand, they have the same sensitivity of 92 dBdB.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
MartinLogan Motion XT F200
Input Type and Bi-Amping / Bi-Wiring
Motion XT F200 features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. F702 has a Binding post which doesn't feature bi-amping/bi-wiring.
MartinLogan Motion XT F200's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Fyne Audio F702's and MartinLogan Motion XT F200's external dimensions. Fyne Audio F702 has external dimensions of 1110.0 x 383.5 x 439.4mm (43.7 x 15.1 x 17.3inch) whereas MartinLogan Motion XT F200 has external dimensions of 1289 x 349 x 419mm (50-3/4inch x 13-3/4inch x 16-1/2inch).
MartinLogan Motion XT F200 is 34.5mm narrower and 20.4mm less deeper than Fyne Audio F702 but it is also 179mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Fyne Audio F702 is approximately 1685.1cm2 / 261.2inch2 and base area of the MartinLogan Motion XT F200 is approximately 1462.3cm2 / 226.7inch2. The F702 requires 15% more surface area than the Motion XT F200 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Fyne Audio F702 weighs 30.48kg / 67.1lbs and the MartinLogan Motion XT F200 weighs 39.00kg / 85.8lbs. This makes the Motion XT F200 28% heavier than the F702.
Here is a comparison of how F702 and Motion XT F200's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
MartinLogan Motion XT F200
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 High Frequency Response |
34k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
1110mm
vs
1289mm
|
Easier to fit in smaller spaces |
 Woofer Size |
8 inches
vs
inches
|
Larger woofer |
|
Low Frequency Response |
27 Hz
vs
30 Hz
|
Generates deeper bass |
 Base Surface Area |
1462cm2
vs
1685cm2
|
Takes less floor space |
 Price per pair* |
5498USD
vs
9499USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Fyne Audio F702 |
MartinLogan Motion® XT F200 |
| Brand |
Fyne Audio |
MartinLogan |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Sensitivity |
92 dB |
92 dB |
| Impedance |
8 ohms |
4 ohms |
| Frequency Response |
30-34k Hz |
27-25k Hz |
Drivers |
|
|
| Woofer Quantity |
|
3 |
| Woofer Size |
" |
8" |
| Woofer Composition |
|
Aluminum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
1.25 x 2.4" |
| Tweeter Type |
n/a |
Folded Motion XT |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
6.5" |
| Crossover Frequency |
250 Hz, 1700 Hz |
300Hz and 2600Hz |
| Firing Direction |
n/a |
bottom |
| Suggested Break-in Period |
n/a |
Allow 72 hours of break-in |
Physical Specs |
|
|
| Height |
1110.0mm (43.7") |
1289.0mm (50.7") |
| Width |
383.5mm (15.1") |
349.0mm (13.7") |
| Depth |
439.4mm (17.3") |
419.0mm (16.5") |
| Weight |
30.48kg (67.1lbs) |
39.00kg (85.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
n/a |
Gloss Black, Walnut, and Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - Fyne Audio F702 costs roughly 1.7x what MartinLogan Motion XT F200 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass |
B |
MartinLogan Motion XT F200 digs deeper - 27Hz against 30Hz. A subwoofer would even that out. |
| Amplifier needs |
evenly matched |
Similar sensitivity (92dB vs 92dB) - both want much the same power. |
| Amplifier match |
A |
Fyne Audio F702 is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Size |
depends |
Similar cabinet size - neither is easier to fit. |
| Expandability |
B |
MartinLogan Motion XT F200: bi-amping. |
| Price |
B |
MartinLogan Motion XT F200 is cheaper - $5,498 against $9,499, about 42% less; arguably a different class. |
A Fyne Audio F702
B MartinLogan Motion XT F200
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
MartinLogan Motion XT F200 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. Match it to your room: we rate MartinLogan Motion XT F200 the better fit for a very large room; elsewhere the two are rated the same. If your amplifier is modest, vintage or valve-based, Fyne Audio F702 is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.