In this review, we will be comparing F501S and A2, two Passive Floor-standing speakers from Fyne Audio and Spendor.
Let's have a brief look at the main features
of Fyne Audio F501S and Spendor A2 first before getting into our more
detailed comparison.
| Key Specs | Fyne Audio F501S | Spendor A2 |
|---|
| Brand | Fyne Audio United Kingdom · founded 2017 | Spendor United Kingdom · founded 1969 |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | — | 0.87" |
|---|
| Woofer | 6" | 5.91" |
|---|
| Frequency response | 36-34k Hz | 36-25k Hz |
|---|
| Sensitivity | 90 dB | 85 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 30 - 150 W watts | — |
|---|
| Weight | 18.60kg / 40.9lbs | 12.00kg / 26.4lbs |
|---|
| Dimensions (H x W x D) | 38.7" x 9.84" x 12.5" 983.0 x 249.9 x 317.5mm | 30.9" x 5.9" x 10.15" 784.9 x 149.9 x 257.8mm |
|---|
What size room are the Fyne Audio F501S and Spendor A2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Fyne Audio F501S |
Spendor A2 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that F501S is a 3-way design whereas the A2 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Fyne Audio F501SSpendor A2
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Fyne Audio F501S |
Spendor A2 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
-inch
|
0.87-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
x 6-inch
|
1 x 5.91-inch
|
F501S features a " Tweeter and x 6" Woofer with a Crossover frequency at 250 Hz, 1700 Hz. On the other hand, the A2 features a 0.87" Tweeter and 1 x 5.91" Woofer with a Crossover frequency at 4,200 Hz.
Frequency Response
F501S has a frequency range of 36-34k Hz whereas A2 has a frequency range of 36-25k Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
F501S and A2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. F501S sensitivity is rated at 90 dB and the A2's is at 85 dB. This 5 dB difference makes the Fyne Audio F501S a more sensitive speaker compared to Spendor A2, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
F501S features Binding post type posts and A2 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Fyne Audio F501S's and Spendor A2's external dimensions. Fyne Audio F501S has external dimensions of 983.0 x 249.9 x 317.5mm (38.7 x 9.84 x 12.5inch) whereas Spendor A2 has external dimensions of 784.9 x 149.9 x 257.8mm (30.9 x 5.9 x 10.15inch).
Fyne Audio F501S is clearly the larger of the two speakers. Its body is 100mm wider, 198.1mm taller and 59.7mm deeper than Spendor A2.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Fyne Audio F501S needs about 105% more floor or shelf area. Fyne Audio F501S is 60mm deeper, so it stands that much further out from the wall. Fyne Audio F501S is 198mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Fyne Audio F501S is approximately 793.4cm2 / 123.0inch2 and base area of the Spendor A2 is approximately 386.4cm2 / 59.9inch2. The F501S requires 105% more surface area than the A2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Fyne Audio F501S weighs 18.60kg / 40.9lbs and the Spendor A2 weighs 12.00kg / 26.4lbs. This makes the F501S 55% heavier than the A2.
Here is a comparison of how F501S and A2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
90 dB
vs
85 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6 inches
vs
5.91 inches
|
Larger woofer |
High Frequency Response |
34k Hz
vs
25k Hz
|
Generates higher frequency |
Price per pair* |
2799USD
vs
3100USD
|
costs less (*prices may change depending on the seller, location and time) |
Height |
784mm
vs
983mm
|
Easier to fit in smaller spaces |
Base Surface Area |
386cm2
vs
793cm2
|
Takes less floor space |
| General |
Fyne Audio F501S |
Spendor A2 |
| Brand |
Fyne Audio |
Spendor |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Sensitivity |
90 dB |
85 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
36-34k Hz |
36-25k Hz |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
6" |
5.91" |
| Woofer Composition |
|
|
| Tweeter Size |
- |
0.87" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
250 Hz, 1700 Hz |
4,200 Hz |
Physical Specs |
|
|
| Height |
983.0mm (38.7") |
784.9mm (30.9") |
| Width |
249.9mm (9.8") |
149.9mm (5.9") |
| Depth |
317.5mm (12.5") |
257.8mm (10.1") |
| Weight |
18.60kg (40.9lbs) |
12.00kg (26.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|
A generation apart: Fyne Audio F501S is the newer design, against a 2017 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (36Hz vs 36Hz). |
| Amplifier needs | A | Fyne Audio F501S is more sensitive (90dB vs 85dB), so it goes louder on the same amplifier. |
| Size | depends | Spendor A2 is easier to place; Fyne Audio F501S is bigger, which usually goes with fuller bass. Your room decides. |
| Price | evenly matched | Much the same money ($2,799 vs $3,100 a pair). |
A Fyne Audio F501S B Spendor A2
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Fyne Audio F501S has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. In a large or open-plan room, Fyne Audio F501S has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Spendor A2 is the easier speaker to get right. If your amplifier is modest, vintage or valve-based, Fyne Audio F501S is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.