In this review, we will be comparing F501E and Silver 300 7G, two Passive Floor-standing speakers from Fyne Audio and Monitor Audio.
Let's have a brief look at the main features
of Fyne Audio F501E and Monitor Audio Silver 300 7G first before getting into our more
detailed comparison.
| Key Specs | Fyne Audio F501E | Monitor Audio Silver 300 7G |
|---|
| Brand | Fyne Audio United Kingdom · founded 2017 | Monitor Audio United Kingdom · founded 1972 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | — | 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
|---|
| Midrange | — | 3" |
|---|
| Woofer | 6" | 2 x 6" C-CAM RST II |
|---|
| Frequency response | 36-34k Hz | 31-35k Hz |
|---|
| Sensitivity | 90 dB | 87.5 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 30 - 150 W watts | 80-200 watts |
|---|
| Weight | 17.80kg / 39.2lbs | 19.32kg / 42.5lbs |
|---|
| Dimensions (H x W x D) | 38.74" x 9.84" x 11.57" 984.0 x 249.9 x 293.9mm | 40-3/4" x 10-7/8" x 15-1/4" 1036.0 x 277.0 x 388.0mm |
|---|
What size room are the Fyne Audio F501E and Monitor Audio Silver 300 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Fyne Audio F501E |
Monitor Audio Silver 300 7G |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both F501E and Silver 300 7G are 3-way speakers.
Fyne Audio F501EMonitor Audio Silver 300 7G
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Fyne Audio F501E |
Monitor Audio Silver 300 7G |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
1 x 3-inch |
|
Woofer
|
x 6-inch
|
2 x 6-inch
|
F501E features a " Tweeter and x 6" Woofer with a Crossover frequency at 250 Hz, 1700 Hz. On the other hand, the Silver 300 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter, a 3" Midrange and 2 x 6" C-CAM RST II Woofer.
Frequency Response
F501E has a frequency range of 36-34k Hz whereas Silver 300 7G has a frequency range of 31-35k Hz. With a minimum frequency of 31Hz, the Silver 300 7G can go significantly deeper on the low side and provide stronger bass compared to the F501E's min frequency of 36Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
F501E and Silver 300 7G have the same Impedance of 8 ohms but where they differ is the sensitivity levels. F501E sensitivity is rated at 90 dB and the Silver 300 7G's is at 87.5 dB. This 2 dB difference makes the Fyne Audio F501E a more sensitive speaker compared to Monitor Audio Silver 300 7G, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Silver 300 7G can handle a max power of 200 watts RMS, whereas F501E has a max power handling value of 150 watts RMS, 50 watts less than the Silver 300 7G.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Monitor Audio Silver 300 7G
Input Type and Bi-Amping / Bi-Wiring
Silver 300 7G features Binding post posts which make bi-amping or bi-wiring possible. F501E has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Fyne Audio F501E's and Monitor Audio Silver 300 7G's external dimensions. Fyne Audio F501E has external dimensions of 984.0 x 249.9 x 293.9mm (38.74 x 9.84 x 11.57inch) whereas Monitor Audio Silver 300 7G has external dimensions of 1036.0 x 277.0 x 388.0mm (40-3/4 x 10-7/8 x 15-1/4inch).
Monitor Audio Silver 300 7G is clearly the larger of the two speakers. Its body is 27.1mm wider, 52mm taller and 94.1mm deeper than Fyne Audio F501E.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Monitor Audio Silver 300 7G needs about 46% more floor or shelf area. Monitor Audio Silver 300 7G is 94mm deeper, so it stands that much further out from the wall. Monitor Audio Silver 300 7G is 52mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Fyne Audio F501E is approximately 734.5cm2 / 113.8inch2 and base area of the Monitor Audio Silver 300 7G is approximately 1074.8cm2 / 166.6inch2. The F501E requires 32% less surface area than the Silver 300 7G which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Fyne Audio F501E weighs 17.80kg / 39.2lbs and the Monitor Audio Silver 300 7G weighs 19.32kg / 42.5lbs. This makes the Silver 300 7G 9% heavier than the F501E.
Here is a comparison of how F501E and Silver 300 7G's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 300 7G
What's in the Box of Monitor Audio Silver 300 7G?
Here are the items that come with the Silver 300 7G:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet
- 4 Rubber feet (pre-installed on outrigger feet)
- 4 Spikes
- 4 Bolts
- 4 Machine screws
- 2 Foam port plugs
- 2 Hex-keys
- Owners Manual
- Important Safety Instructions
Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Height |
984mm
vs
1036mm
|
Easier to fit in smaller spaces |
Base Surface Area |
734cm2
vs
1074cm2
|
Takes less floor space |
Price per pair* |
1799USD
vs
2600USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
Low Frequency Response |
31 Hz
vs
36 Hz
|
Generates deeper bass |
High Frequency Response |
35k Hz
vs
34k Hz
|
Generates higher frequency |
| General |
Fyne Audio F501E |
Monitor Audio Silver 300 7G |
| Brand |
Fyne Audio |
Monitor Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
30 - 150 W watts |
80-200 watts |
| Sensitivity |
90 dB |
87.5 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
36-34k Hz |
31-35k Hz |
Drivers |
|
|
| Woofer Quantity |
|
2 |
| Woofer Size |
6" |
6" |
| Woofer Composition |
|
C-CAM RST II |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
1" |
| Tweeter Type |
n/a |
gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
3" |
| Crossover Frequency |
250 Hz, 1700 Hz |
n/a |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
984.0mm (38.7") |
1036.0mm (40.8") |
| Width |
249.9mm (9.8") |
277.0mm (10.9") |
| Depth |
293.9mm (11.6") |
388.0mm (15.3") |
| Weight |
17.80kg (39.2lbs) |
19.32kg (42.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
n/a |
Oak |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | B | Monitor Audio Silver 300 7G digs deeper - 31Hz against 36Hz. A subwoofer would even that out. |
| Amplifier needs | A | Fyne Audio F501E is more sensitive (90dB vs 88dB), so it goes louder on the same amplifier. |
| Headroom | B | Monitor Audio Silver 300 7G takes more power (200W vs 150W) - more in hand in a big room. |
| Size | depends | Fyne Audio F501E is easier to place; Monitor Audio Silver 300 7G is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | B | Monitor Audio Silver 300 7G: bi-amping. |
| Price | A | Fyne Audio F501E is cheaper - $1,799 against $2,600, about 31% less. |
A Fyne Audio F501E B Monitor Audio Silver 300 7G
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Monitor Audio Silver 300 7G measures better, Fyne Audio F501E costs about about 45% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 36Hz anyway, which makes the cheaper Fyne Audio F501E much easier to justify. Match it to your room: we rate Fyne Audio F501E the better fit for a small room, and Monitor Audio Silver 300 7G for a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.