In this review, we will be comparing F500S and KUPID, two Passive Bookshelf speakers from Fyne Audio and DALI.
Let's have a brief look at the main features
of Fyne Audio F500S and DALI KUPID first before getting into our more
detailed comparison.
| Key Specs | Fyne Audio F500S | DALI KUPID |
|---|
| Brand | Fyne Audio
United Kingdom · founded 2017 | DALI
Denmark · founded 1983 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | — | 1" Dome |
|---|
| Woofer | 6" | 4.5" Paper/wood fiber |
|---|
| Frequency response | 45-34k Hz | 63-25k Hz |
|---|
| Sensitivity | 89 dB | 83 dB |
|---|
| Impedance | 8 ohms | 4 ohms |
|---|
| Power range | 30 - 100 W watts | 40-120 watts |
|---|
| Weight | 8.30kg / 18.3lbs | 2.91kg / 6.4lbs |
|---|
| Dimensions (H x W x D) | 12.8" x 8" x 12.5"
325.1 x 203.2 x 317.5mm | 9-11/16" x 5-15/16" x 7-13/16"
247.0 x 151.0 x 199.0mm |
|---|
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both F500S and KUPID are 2-way speakers.
Fyne Audio F500SDALI KUPID
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Fyne Audio F500S |
DALI KUPID |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
x 6-inch
|
1 x 4.5-inch
|
F500S features a " Tweeter and x 6" Woofer with a Crossover frequency at 1700 Hz. On the other hand, the KUPID features a 1" Dome Tweeter and 1 x 4.5" Paper/wood fiber Woofer.
Frequency Response
F500S has a frequency range of 45-34k Hz whereas KUPID has a frequency range of 63-25k Hz. With a minimum frequency of 45Hz, the F500S can go significantly deeper on the low side and provide stronger bass compared to the KUPID's min frequency of 63Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
F500S is a 8 ohms speaker compared to the KUPID which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the KUPID can provide this impedance level.
These two speakers also have different sensitivity levels. F500S sensitivity is rated at 89 dB and the KUPID's is rated at 83 dB. This 6 dB difference makes the Fyne Audio F500S a more sensitive speaker compared to DALI KUPID, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
KUPID can handle a max power of 120 watts RMS, whereas F500S has a max power handling value of 100 watts RMS, 20 watts less than the KUPID.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
F500S features Binding post type posts and KUPID has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Fyne Audio F500S's and DALI KUPID's external dimensions. Fyne Audio F500S has external dimensions of 325.1 x 203.2 x 317.5mm (12.8 x 8 x 12.5inch) whereas DALI KUPID has external dimensions of 247.0 x 151.0 x 199.0mm (9-11/16inch x 5-15/16inch x 7-13/16inch).
Fyne Audio F500S is clearly the larger of the two speakers. Its body is 52.2mm wider, 78.1mm taller and 118.5mm deeper than DALI KUPID.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Fyne Audio F500S needs about 115% more floor or shelf area. Fyne Audio F500S is 119mm deeper, so it stands that much further out from the wall. Fyne Audio F500S is 78mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Fyne Audio F500S is approximately 645.2cm2 / 100.0inch2 and base area of the DALI KUPID is approximately 300.5cm2 / 46.6inch2. The F500S requires 115% more surface area than the KUPID which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Fyne Audio F500S weighs 8.30kg / 18.3lbs and the DALI KUPID weighs 2.91kg / 6.4lbs. This makes the F500S 185% heavier than the KUPID.
Here is a comparison of how F500S and KUPID's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of DALI KUPID?
Here are the items that come with the KUPID:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Wall-mount brackets
- Four #8 x 0.5\" self-tapping screws
- 8 Rubber feet
- Quick Start Guide
- QR Code Registration Card
 Sensitivity |
89 dB
vs
83 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Woofer Size |
6 inches
vs
4.5 inches
|
Larger woofer |
|
Low Frequency Response |
45 Hz
vs
63 Hz
|
Generates deeper bass |
 High Frequency Response |
34k Hz
vs
25k Hz
|
Generates higher frequency |
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 Height |
247mm
vs
325mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
300cm2
vs
645cm2
|
Takes less floor space |
 Price per pair* |
600USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Fyne Audio F500S |
DALI KUPID |
| Brand |
Fyne Audio |
DALI |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30 - 100 W watts |
40-120 watts |
| Sensitivity |
89 dB |
83 dB |
| Impedance |
8 ohms |
4 ohms |
| Frequency Response |
45-34k Hz |
63-25k Hz |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
6" |
4.5" |
| Woofer Composition |
|
Paper/wood fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
1" |
| Tweeter Type |
n/a |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1700 Hz |
n/a |
Physical Specs |
|
|
| Height |
325.1mm (12.8") |
247.0mm (9.7") |
| Width |
203.2mm (8") |
151.0mm (5.9") |
| Depth |
317.5mm (12.5") |
199.0mm (7.8") |
| Weight |
8.30kg (18.3lbs) |
2.91kg (6.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Vinyl |
| Available Colors |
n/a |
Black Ash, Caramel White,Chilly Blue,Dark Wanut,Golden Yellow |
| Mounting Bracket |
|
Fixed bracket |
| Recommended Stand Height |
n/a |
30-32" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
No |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - Fyne Audio F500S costs roughly 2.2x what DALI KUPID does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | Fyne Audio F500S digs deeper - 45Hz against 63Hz. |
| Amplifier needs | A | Fyne Audio F500S is more sensitive (89dB vs 83dB), so it goes louder on the same amplifier. |
| Amplifier match | A | Fyne Audio F500S is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | evenly matched | Similar power handling (100W vs 120W). |
| Size | depends | DALI KUPID is easier to place; Fyne Audio F500S is bigger, which usually goes with fuller bass. Your room decides. |
| Price | B | DALI KUPID is cheaper - $600 against $1,299, about 54% less; arguably a different class. |
A Fyne Audio F500S B DALI KUPID
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Fyne Audio F500S measures better, DALI KUPID costs about about 117% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 63Hz anyway, which makes the cheaper DALI KUPID much easier to justify. In a large or open-plan room, Fyne Audio F500S has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, DALI KUPID is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.