In this review, we will be comparing Vestia No3 and Kendall, two Passive Floor-standing speakers from Focal and KLH.
Let's have a brief look at the main features
of Focal Vestia No3 and KLH Kendall first before getting into our more
detailed comparison.
Focal Vestia No3 Key Specs
- 3-way Design
- 1" inverted dome Tweeter
- 6.5" Midrange
- 3 x 6.5" Slatefiber Woofer
- 42-30k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 8ohms
- Power Range:40-300watts
- Weight:26.50kg
- Dimensions (H x W x D): 1121.0" x 10-1/8" x 14-3/4"( 1121.0 x 258.0 x 375.0mm )
KLH Kendall Key Specs
- 3-way Design
- 1" Tweeter
- 5.25" Midrange
- 2 x 6.5" Woven Kevlar Woofer
- 5.25" Midrange
- 25-23k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 250watts
- Weight:22.14kg
- Dimensions (H x W x D): 1021.0" x 8-5/16" x 14-15/16"( 1021.0 x 212.0 x 380.0mm )
In the following sections, we will get into more detail in order to better understand how the Focal Vestia No3 and KLH Kendall compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vestia No3 and Kendall are 3-way speakers.
| Driver |
Focal Vestia No3 |
KLH Kendall |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
1 x 5.25-inch |
|
Woofer
|
3 x 6.5-inch
|
2 x 6.5-inch
|
Vestia No3 features a 1" Al/Mg inverted dome Tweeter , a 6.5" Midrange and 3 x 6.5" Slatefiber Woofer with a Crossover frequency at 280Hz and 3100Hz. On the other hand, the Kendall features a 1" anodized aluminum Tweeter , a 5.25" Midrange and 2 x 6.5" Woven Kevlar Woofer .
Frequency Response
Vestia No3 has a frequency range of 42-30k Hz whereas Kendall has a frequency range of 25-23k Hz. With a minimum frequency of 25Hz, the Kendall can go significantly deeper on the low side and provide stronger bass compared to the Vestia No3's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vestia No3 and Kendall have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Vestia No3 sensitivity is rated at 92 dB and the Kendall's is at 96 dB. This 4 dB difference makes the KLH Kendall a more sensitive speaker compared to Focal Vestia No3, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Vestia No3 can handle a max power of 300 watts RMS from the amp the whereas Kendall has a max power handling value of watts RMS, 300 watts less than the Vestia No3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Vestia No3's and KLH Kendall's external dimensions. Focal Vestia No3 has external dimensions of 1121.0 x 258.0 x 375.0mm ( 44-1/8-inch x 10-1/8-inch x 14-3/4-inch) whereas KLH Kendall has external dimensions of 1021.0 x 212.0 x 380.0mm ( 40-3/16 x 8-5/16 x 14-15/16inch) .
KLH Kendall is 46mm narrower and 100mm shorter than Focal Vestia No3 but it is also 5mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Vestia No3 is approximately 967.5cm2 / 150.0inch2 and base area of the KLH Kendall is approximately 805.6cm2 / 124.9inch2. The Vestia No3 requires 20% more surface area than the Kendall which gives it a small disadvantage on placement in tight spaces.