In this review, we will be comparing Vestia No1 and RP-600M, two Passive Bookshelf speakers from Focal and Klipsch. Let's have a brief look at the main features
of Focal Vestia No1 and Klipsch RP-600M first before getting into our more
detailed comparison.
Focal Vestia No1 Key Specs
- 2-way Design
- 1" inverted dome Tweeter
- 6.5" Slatefiber Woofer
- 56-30k Hz Frequency Response
- 89.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-120watts
- Weight:7.00kg
- Dimensions (H x W x D): 388.0" x 8-5/8" x 10-1/4"( 388.0 x 220.0 x 261.0mm )
Klipsch RP-600M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 6.5" Cerametallic Woofer
- 45-25k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:7.30kg
- Dimensions (H x W x D): 399.0" x 7.9" x 11.8"( 399.0 x 202.0 x 301.0mm )
What size room are the Focal Vestia No1 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Focal Vestia No1 |
Klipsch RP-600M |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Focal Vestia No1 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vestia No1 and RP-600M are 2-way speakers.
| Driver |
Focal Vestia No1 |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Vestia No1 features a 1" Al/Mg inverted dome Tweeter and 1 x 6.5" Slatefiber Woofer with a Crossover frequency at 2800Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Vestia No1 has a frequency range of 56-30k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 45Hz, the RP-600M can go significantly deeper on the low side and provide stronger bass compared to the Vestia No1's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vestia No1 and RP-600M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Vestia No1 sensitivity is rated at 89.5 dB and the RP-600M's is at 96 dB. This 6 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Focal Vestia No1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Vestia No1 can handle a max power of 120 watts RMS from the amp the whereas RP-600M has a max power handling value of 100 watts RMS, 20 watts less than the Vestia No1.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Vestia No1 has a front firing port whereas RP-600M has a rear firing ports. Focal Vestia No1's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-600M with its rear-firing port.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Vestia No1's and Klipsch RP-600M's external dimensions. Focal Vestia No1 has external dimensions of 388.0 x 220.0 x 261.0mm ( 15-1/4-inch x 8-5/8-inch x 10-1/4-inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Focal Vestia No1 is 11mm shorter and 40mm less deeper than Klipsch RP-600M but it is also 18mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Vestia No1 is approximately 574.2cm2 / 89.0inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Vestia No1 requires 6% less surface area than the RP-600M which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Vestia No1 weighs 7.00kg / 15.4lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs. This makes the RP-600M 4% heavier than the Vestia No1.
Here is a comparison of how Vestia No1 and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information