In this review, we will be comparing Chorus 706 and BW 606, two Passive Bookshelf speakers from Focal and Bowers Wilkins. Let's have a brief look at the main features
of Focal Chorus 706 and B&W 606 first before getting into our more
detailed comparison.
What size room are the Focal Chorus 706 and B&W 606 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Chorus 706 and B&W 606 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Chorus 706 and BW 606 are 2-way speakers.
| Driver |
Focal Chorus 706 |
B&W 606 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Chorus 706 features a 1" TNV2 AI/Mg inverted dome Tweeter and 1 x 6.5" Polyglass Woofer with a Crossover frequency at 3000Hz. On the other hand, the BW 606 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
Chorus 706 has a frequency range of 55-28k Hz whereas BW 606 has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the BW 606 can go slightly deeper then the Chorus 706's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Chorus 706 and BW 606 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Chorus 706 sensitivity is rated at 90 dB and the BW 606's is at 88 dB. This 2 dB difference makes the Focal Chorus 706 a more sensitive speaker compared to B&W 606, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
BW 606 features Post posts which make bi-amping or bi-wiring possible. Chorus 706 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 606's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Chorus 706 has a front firing port whereas BW 606 has a rear firing ports. Focal Chorus 706's front-firing port gives more flexibility in placement in regards to proximity to walls compared to B&W 606 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Chorus 706's and B&W 606's external dimensions. Focal Chorus 706 has external dimensions of 390.0 x 220.0 x 263.0mm ( 15.4 x 8.7 x 10.4inch) whereas B&W 606 has external dimensions of 345.0 x 190.0 x 324.0mm ( 13.5 x 7.4 x 12.7inch) .
B&W 606 is 30mm narrower and 45mm shorter than Focal Chorus 706 but it is also 61mm deeper.
Below you can see the front view size comparison of Focal Chorus 706 and B&W 606 in scale.
Comparison image of Focal Chorus 706 and B&W 606 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Chorus 706 is approximately 578.6cm2 / 89.7inch2 and base area of the B&W 606 is approximately 615.6cm2 / 95.4inch2. The Chorus 706 requires 6% less surface area than the BW 606 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Focal Chorus 706 and B&W 606 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Chorus 706 weighs 8.20kg / 18lbs and the B&W 606 weighs 6.90kg / 15.2lbs. This makes the Chorus 706 19% heavier than the BW 606.
Here is a comparison of how Chorus 706 and BW 606's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Focal Chorus 706?
Here are the items that are included inside the box of Chorus 706:
2 Bookshelf loudspeakers 2 Cloth grilles (attached) User manual
What's in the Box of B&W 606?
Here are the items that come with the BW 606:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps (pre-installed)ManualBowers & Wilkins brochureWarranty Information
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Base Surface Area |
578cm2 (220x263mm)
vs
615cm2 (190x324mm)
|
Takes less floor space |
 Minimum Impedance |
3.7 ohms
vs
3.6 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Low Frequency Response |
52 Hz
vs
55 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
345mm
vs
390mm
|
Easier to fit in smaller spaces |
| General |
Focal Chorus 706 |
Bowers & Wilkins 606 |
| Brand |
Focal |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25 - 120 watts |
30-120 watts |
| Sensitivity |
90 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.6 ohms |
3.7 ohms |
| Frequency Response |
55-28k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Polyglass |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
inverted dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3000Hz |
n/a |
| Firing Direction |
front |
rear |
| Suggested Break-in Period |
n/a |
allow up to a week for the temperature effects to stabilise and 15 hours of average use for the parts to attain their intended design characteristics. |
Physical Specs |
|
|
| Height |
390.0mm (15.4") |
345.0mm (13.6") |
| Width |
220.0mm (8.7") |
190.0mm (7.5") |
| Depth |
263.0mm (10.4") |
324.0mm (12.8") |
| Weight |
8.20kg (18lbs) |
6.90kg (15.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Lacquer/Leatherette |
MDF/Vinyl |
| Available Colors |
Rosewood, Walnut, Black |
Black, White, Oak |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 |
5 Years |
| Labor Warranty |
5 |
5 Years |