In this review, we will be comparing two different type of speakers by Focal. Focal Chora 826-D is a Floor-standing speaker whereas the Chora 806 is a Bookshelf speaker.
Let's have a brief look at the main features
of Focal Chora 826-D and Focal Chora 806 first before getting into our more
detailed comparison.
Chora 826-D and Chora 806 are members of Focal's Chora series of speakers. Below you can find the loudspeakers from this series.
Focal Chora Series History
What size room are the Focal Chora 826-D and Focal Chora 806 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Chora 826-D and Focal Chora 806 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Chora 826-D is a 3-way design whereas the Chora 806 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Focal Chora 826-D |
Focal Chora 806 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
1 x 6.5-inch
|
Chora 826-D features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Slatefiber Woofer with a Crossover frequency at 270Hz and 2700Hz. On the other hand, the Chora 806 features a 1" TNV2 AI/Mg inverted dome Tweeter and 1 x 6.5" Slatefiber Woofer with a Crossover frequency at 3000Hz.
Frequency Response
Chora 826-D has a frequency range of 48-28k Hz whereas Chora 806 has a frequency range of 55-28k Hz. With a minimum frequency of 48Hz, the Chora 826-D can go significantly deeper on the low side and provide stronger bass compared to the Chora 806's min frequency of 58Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Chora 826-D and Chora 806 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Chora 826-D sensitivity is rated at 91 dB and the Chora 806's is at 89 dB. This 2 dB difference makes the Focal Chora 826-D a more sensitive speaker compared to Focal Chora 806, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Chora 826-D can handle a max power of 250 watts RMS from the amp the whereas Chora 806 has a max power handling value of 120 watts RMS, 130 watts less than the Chora 826-D.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Chora 826-D features Binding post type posts and Chora 806 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Focal Chora 826-D's Binding post terminals
Focal Chora 806's Binding post terminals
Cabinet Type and Port Position
Chora 826-D has a front firing port whereas Chora 806 has a rear firing ports. Focal Chora 826-D's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Focal Chora 806 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Chora 826-D's and Focal Chora 806's external dimensions. Focal Chora 826-D has external dimensions of 1053.0 x 305.0 x 420.0mm ( 41-7/16 x 12 x 16-1/2inch) whereas Focal Chora 806 has external dimensions of 431.0 x 210.0 x 270.0mm ( 17 x 8.25 x 10.7inch) .
Focal Chora 826-D is clearly the larger of the two speakers. Its body is 95mm wider, 622mm taller and 150mm deeper than Focal Chora 806.
Below you can see the front view size comparison of Focal Chora 826-D and Focal Chora 806 in scale.
Comparison image of Focal Chora 826-D and Focal Chora 806 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Chora 826-D is approximately 1281.0cm2 / 198.6inch2 and base area of the Focal Chora 806 is approximately 567.0cm2 / 87.9inch2. The Chora 826-D requires 126% more surface area than the Chora 806 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Focal Chora 826-D?
Here are the items that are included inside the box of Chora 826-D:
Dolby-Atmos enabled floorstanding loudspeakerBase4 Rubber feet4 Spike feet4 Nuts4 Screws4 WashersHex-key2 GrillesUser manual
What's in the Box of Focal Chora 806?
Here are the items that come with the Chora 806:
2 Bookshelf loudspeakers 2 Grilles 8 Self-adhesive rubber pads User manual