In this review, we will be comparing Aria Evo X No3 and Motion XT F200, two Passive Floor-standing speakers from Focal and MartinLogan. Let's have a brief look at the main features
of Focal Aria Evo X No3 and MartinLogan Motion XT F200 first before getting into our more
detailed comparison.
What size room are the Focal Aria Evo X No3 and MartinLogan Motion XT F200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Aria Evo X No3 and MartinLogan Motion XT F200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Aria Evo X No3 and Motion XT F200 are 3-way speakers.
| Driver |
Focal Aria Evo X No3 |
MartinLogan Motion XT F200 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1.25 x 2.4-inch
|
|
Midrange
|
1 x 6.5-inch |
1 x 6.5-inch |
|
Woofer
|
3 x 6.5-inch
|
3 x 8-inch
|
Aria Evo X No3 features a 1" Al/Mg inverted dome Tweeter , a 6.5" Midrange and 3 x 6.5" Flax Woofer with a Crossover frequency at 260 Hz - 3100 Hz. On the other hand, the Motion XT F200 features a 1.25 x 2.4" Folded Motion XT Tweeter , a 6.5" Midrange and 3 x 8" Aluminum Woofer with a Crossover frequency at 300Hz and 2600Hz.
Frequency Response
Aria Evo X No3 has a frequency range of 39-30kHz whereas Motion XT F200 has a frequency range of 27-25k Hz. With a minimum frequency of 27Hz, the Motion XT F200 can go significantly deeper on the low side and provide stronger bass compared to the Aria Evo X No3's min frequency of 39Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
MartinLogan Motion XT F200
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Aria Evo X No3 is a 8 ohms speaker compared to the Motion XT F200 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion XT F200 can provide this impedance level.
On the other hand, they have the same sensitivity of 92 dBdB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Aria Evo X No3 can handle a max power of 600 watts RMS from the amp the whereas Aria Evo X No3 has a max power handling value of 300 watts RMS , 300 watts less than the Motion XT F200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion XT F200 features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Aria Evo X No3 has a Binding post which doesn't feature bi-amping/bi-wiring.
Focal Aria Evo X No3's Binding post terminals
MartinLogan Motion XT F200's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Aria Evo X No3 has a front firing port whereas Motion XT F200 has a bottom firing ports. Focal Aria Evo X No3's front-firing port gives more flexibility in placement in regards to proximity to walls compared to MartinLogan Motion XT F200 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Aria Evo X No3's and MartinLogan Motion XT F200's external dimensions. Focal Aria Evo X No3 has external dimensions of 115 x 29.4 x 37.1 cm ( 45-¼ x 11-5/8 x 14-⅝) whereas MartinLogan Motion XT F200 has external dimensions of 1289 x 349 x 419mm ( 50-3/4inch x 13-3/4inch x 16-1/2inch ) .
MartinLogan Motion XT F200 is clearly the larger of the two speakers. Its body is 54mm wider, 139mm taller and 48mm deeper than Focal Aria Evo X No3.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Aria Evo X No3 is approximately 1094.5cm2 / 169.6inch2 and base area of the MartinLogan Motion XT F200 is approximately 1462.3cm2 / 226.7inch2. The Aria Evo X No3 requires 25% less surface area than the Motion XT F200 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Aria Evo X No3 weighs 29.00kg / 63.8lbs and the MartinLogan Motion XT F200 weighs 39.00kg / 85.8lbs. This makes the Motion XT F200 34% heavier than the Aria Evo X No3.
Here is a comparison of how Aria Evo X No3 and Motion XT F200's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
MartinLogan Motion XT F200
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
1150mm
vs
1289mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1094cm2 (295x371mm)
vs
1462cm2 (349x419mm)
|
Takes less floor space |
 Price per pair* |
5198USD
vs
5498USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
600 watts
vs
300 watts
|
Handle more power from your amplifier |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
27 Hz
vs
39 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
| General |
Focal Aria Evo X No3 |
MartinLogan Motion® XT F200 |
| Brand |
Focal |
MartinLogan |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
40-300 watts |
20-600 watts |
| Sensitivity |
92 dB |
92 dB |
| Impedance |
8 ohms |
4 ohms |
| Impedance |
2.8 ohms |
n/a |
| Frequency Response |
39-30kHz |
27-25k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
3 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Flax |
Aluminum |
| Woofer Surround Material |
TMD |
Rubber |
| Tweeter Size |
1" |
1.25 x 2.4" |
| Tweeter Type |
inverted dome |
Folded Motion XT |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
6.5" |
| Crossover Frequency |
260 Hz - 3100 Hz |
300Hz and 2600Hz |
| Firing Direction |
front |
bottom |
| Suggested Break-in Period |
n/a |
Allow 72 hours of break-in |
Physical Specs |
|
|
| Height |
1150.0mm (45.3") |
1289.0mm (50.7") |
| Width |
295.0mm (11.6") |
349.0mm (13.7") |
| Depth |
371.0mm (14.6") |
419.0mm (16.5") |
| Weight |
29.00kg (63.8lbs) |
39.00kg (85.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
Black High Gloss, Prime Walnut, Moss Green High Gloss |
Gloss Black, Walnut, and Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |