In this review, we will be comparing Aria 926 and 703 S2, two Passive Floor-standing speakers from Focal and Bowers Wilkins. Let's have a brief look at the main features
of Focal Aria 926 and B&W 703 S2 first before getting into our more
detailed comparison.
What size room are the Focal Aria 926 and B&W 703 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Aria 926 and B&W 703 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Aria 926 and 703 S2 are 3-way speakers.
| Driver |
Focal Aria 926 |
B&W 703 S2 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
1 x 6-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
Aria 926 features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Flax Woofer with a Crossover frequency at 290Hz and 2,400Hz. On the other hand, the 703 S2 features a 1" Tweeter , a 6" Midrange and 2 x 6.5" Aerofoil Woofer .
Frequency Response
Aria 926 has a frequency range of 45-28k Hz whereas 703 S2 has a frequency range of 46-28k Hz. With a minimum frequency of 45Hz, the Aria 926 can go slightly deeper then the 703 S2's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Aria 926 and 703 S2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Aria 926 sensitivity is rated at 91.5 dB and the 703 S2's is at 89 dB. This 3 dB difference makes the Focal Aria 926 a more sensitive speaker compared to B&W 703 S2, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Aria 926 can handle a max power of 250 watts RMS from the amp the whereas 703 S2 has a max power handling value of 200 watts RMS, 50 watts less than the Aria 926.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
703 S2 features Binding post posts which make bi-amping or bi-wiring possible. Aria 926 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 703 S2's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Aria 926's and B&W 703 S2's external dimensions. Focal Aria 926 has external dimensions of 1039.0 x 294.0 x 374.0mm ( 40-7/8 x 11-9/16 x 14-11/16inch) whereas B&W 703 S2 has external dimensions of 1025.0 x 200.0 x 321.0mm ( 40.4-inch x 12-11/16-inch x 12.6-inch) .
Focal Aria 926 is clearly the larger of the two speakers. Its body is 94mm wider, 14mm taller and 53mm deeper than B&W 703 S2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Aria 926 is approximately 1099.6cm2 / 170.4inch2 and base area of the B&W 703 S2 is approximately 642.0cm2 / 99.5inch2. The Aria 926 requires 71% more surface area than the 703 S2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Aria 926 weighs 25.00kg / 55lbs and the B&W 703 S2 weighs 25.00kg / 55lbs.
Here is a comparison of how Aria 926 and 703 S2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Focal Aria 926?
Here are the items that are included inside the box of Aria 926:
Floorstanding loudspeakerGrilleBase4 Spike feet (pre-installed in base)4 Plastic feet4 ScrewsAllen-keyHex-toolUser Manual
What's in the Box of B&W 703 S2?
Here are the items that come with the 703 S2:
Floorstanding loudspeakerGrillePlinth (base)2 Jumper-straps (pre-installed)Two-piece foam port plug4 Rubber feet4 Spike feet4 Lock-nuts4 Screws4 Washers4 Lock washersHex-keyManualBowers & Wilkins brochureWarranty Information
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Sensitivity |
92 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
45 Hz
vs
46 Hz
|
Generates deeper bass |
 Price per pair* |
4798USD
vs
5000USD
|
costs less (*prices may change depending on the seller, location and time) |
 Minimum Impedance |
3.1 ohms
vs
2.9 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1025mm
vs
1039mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
642cm2 (200x321mm)
vs
1099cm2 (294x374mm)
|
Takes less floor space |
| General |
Focal Aria 926 |
Bowers & Wilkins 703 S2 |
| Brand |
Focal |
Bowers Wilkins |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
40-250 watts |
30-200 watts |
| Sensitivity |
91.5 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
2.9 ohms |
3.1 ohms |
| Frequency Response |
45-28k Hz |
46-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Flax |
Aerofoil |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
inverted dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
6" |
| Crossover Frequency |
290Hz and 2,400Hz |
n/a |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1039.0mm (40.9") |
1025.0mm (40.4") |
| Width |
294.0mm (11.6") |
200.0mm (7.9") |
| Depth |
374.0mm (14.7") |
321.0mm (12.6") |
| Weight |
25.00kg (55lbs) |
25.00kg (55lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Glass/Leather |
MDF/Lacquer |
| Available Colors |
Gloss Black |
Rosewood, Gloss Black, Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |