In this review, we will be comparing SX6 and RP-500M, two Passive Bookshelf speakers from Fluance and Klipsch.
Let's have a brief look at the main features
of Fluance SX6 and Klipsch RP-500M first before getting into our more
detailed comparison.
| Key Specs | Fluance SX6 | Klipsch RP-500M |
|---|
| Brand | Fluance
Canada · founded 1999 | Klipsch
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Soft-Dome | 1" Tractrix Horn |
|---|
| Woofer | 5" Polymer treated | 5.25" Cerametallic |
|---|
| Frequency response | 60-20k Hz | 48-25k Hz |
|---|
| Sensitivity | 89 dB | 93 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 30-100 watts | up to 75 watts |
|---|
| Weight | 5.10kg / 11.2lbs | 5.40kg / 11.9lbs |
|---|
| Dimensions (H x W x D) | 12-11/16" x 8-3/8" x 9-3/4"
322.0 x 213.0 x 248.0mm | 13.5" x 6.8" x 9.4"
343.0 x 173.0 x 241.0mm |
|---|
What size room are the Fluance SX6 and Klipsch RP-500M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Fluance SX6 |
Klipsch RP-500M |
| Near-field |
Good |
Good |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both SX6 and RP-500M are 2-way speakers.
Fluance SX6Klipsch RP-500M
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Fluance SX6 |
Klipsch RP-500M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
SX6 features a 1" Silk Soft-Dome Tweeter and 1 x 5" Polymer treated Woofer with a Crossover frequency at 3500Hz. On the other hand, the RP-500M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
SX6 has a frequency range of 60-20k Hz whereas RP-500M has a frequency range of 48-25k Hz. With a minimum frequency of 48Hz, the RP-500M can go significantly deeper on the low side and provide stronger bass compared to the SX6's min frequency of 60Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SX6 and RP-500M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SX6 sensitivity is rated at 89 dB and the RP-500M's is at 93 dB. This 4 dB difference makes the Klipsch RP-500M a more sensitive speaker compared to Fluance SX6, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
SX6 can handle a max power of 100 watts RMS, whereas RP-500M has a max power handling value of 75 watts RMS, 25 watts less than the SX6.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
SX6 features Single binding posts type posts and RP-500M has a Single binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch RP-500M's Single binding posts terminals
Cabinet Type and Port Position
Both SX6 and RP-500M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Fluance SX6's and Klipsch RP-500M's external dimensions. Fluance SX6 has external dimensions of 322.0 x 213.0 x 248.0mm (12-11/16 x 8-3/8 x 9-3/4inch) whereas Klipsch RP-500M has external dimensions of 343.0 x 173.0 x 241.0mm (13.5 x 6.8 x 9.4inch).
Klipsch RP-500M is 40mm narrower and 7mm less deeper than Fluance SX6 but it is also 21mm taller.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Fluance SX6 needs about 27% more floor or shelf area. Klipsch RP-500M is 21mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Fluance SX6 is approximately 528.2cm2 / 81.9inch2 and base area of the Klipsch RP-500M is approximately 416.9cm2 / 64.6inch2. The SX6 requires 27% more surface area than the RP-500M which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Fluance SX6 weighs 5.10kg / 11.2lbs and the Klipsch RP-500M weighs 5.40kg / 11.9lbs. This makes the RP-500M 6% heavier than the SX6.
Here is a comparison of how SX6 and RP-500M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-500M?
Here are the items that come with the RP-500M:
- 2 Bookshelf loudspeakers
- 2 Grilles (installed)
- 8 Self-adhesive rubber feet
- User Manual
- Important Safety Instructions
- Warranty Information
 Max Input Power |
100 watts
vs
75 watts
|
Handle more power from your amplifier |
 Height |
322mm
vs
343mm
|
Easier to fit in smaller spaces |
 Price per pair* |
150USD
vs
579USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
93 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
|
Low Frequency Response |
48 Hz
vs
60 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
20k Hz
|
Generates higher frequency |
 Base Surface Area |
416cm2
vs
528cm2
|
Takes less floor space |
| General |
Fluance SX6 |
Klipsch Reference Premiere RP-500M |
| Brand |
Fluance |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
up to 75 watts |
| Sensitivity |
89 dB |
93 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
60-20k Hz |
48-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.25" |
| Woofer Composition |
Polymer treated |
Cerametallic |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3500Hz |
1500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
322.0mm (12.7") |
343.0mm (13.5") |
| Width |
213.0mm (8.4") |
173.0mm (6.8") |
| Depth |
248.0mm (9.8") |
241.0mm (9.5") |
| Weight |
5.10kg (11.2lbs) |
5.40kg (11.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain vinyl |
| Available Colors |
n/a |
Ebony, Walnut, Piano Black |
| Mounting Bracket |
|
Keyhole |
| Recommended Stand Height |
n/a |
28-30" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
Lifetime |
5 Years |
| Labor Warranty |
Lifetime |
5 Years |
These sit in different price classes - Klipsch RP-500M costs roughly 3.9x what Fluance SX6 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | Klipsch RP-500M digs deeper - 48Hz against 60Hz. |
| Amplifier needs | B | Klipsch RP-500M is more sensitive (93dB vs 89dB), so it goes louder on the same amplifier. |
| Headroom | A | Fluance SX6 takes more power (100W vs 75W) - more in hand in a big room. |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | Neither adds bi-amping, a sub output or height drivers. Klipsch RP-500M sits in a wider range (17 models), so a matched surround system is easier later. |
| Price | A | Fluance SX6 is cheaper - $150 against $579, about 74% less; arguably a different class. |
A Fluance SX6 B Klipsch RP-500M
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch RP-500M is ahead, but only on 1 of the measured areas, and it costs about 3.9x the price. That is a lot of money for a narrow margin on paper - Fluance SX6 looks like the sensible buy unless something else about the Klipsch RP-500M appeals to you. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 60Hz anyway, which makes the cheaper Fluance SX6 much easier to justify. If your amplifier is modest, vintage or valve-based, Klipsch RP-500M is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.