In this review, we will be comparing Ai41 and YU6, two Powered Bookshelf speakers from Fluance and Kanto. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of Fluance Ai41 and Kanto YU6 first before getting into our more
detailed comparison.
Fluance Ai41 Key Specs
- 2-way Design
- 90-watt RMS Integrated Amplifier
- 1" Soft Dome Tweeter
- 5" Woven, Glass Fiber Composite Woofer
- 35-20k Hz Frequency Response
- Power Range:up to 90watts
- 16-bit Max Depth / 48 kHz Max Sample Rate
- Built-in 5.0 Bluetooth
- Weight:3.37kg
- Dimensions (H x W x D): 277.0" x 6.5" x 7.6"( 27.7 x 16.5 x 19.3 cm )
Kanto YU6 Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 1" Soft-Dome Tweeter
- 5.25" Kevlar Woofer
- 50-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 4.0 Bluetooth
- Weight:4.00kg
- Dimensions (H x W x D): 272.0" x 6.9" x 8.1"( 272.0 x 175.0 x 205.0mm )
In the following sections, we will get into more detail in order to better understand how the Fluance Ai41 and Kanto YU6 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Ai41 and YU6 are 2-way speakers.
| Driver |
Fluance Ai41 |
Kanto YU6 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
Ai41 features a 1" Silk Neodymium Ferrofluid Cooled Soft Dome Tweeter and 1 x 5" Woven, Glass Fiber Composite Woofer . On the other hand, the YU6 features a 1" Silk Soft-Dome Tweeter and 1 x 5.25" Kevlar Woofer .
Frequency Response
Ai41 has a frequency range of 35-20k Hz whereas YU6 has a frequency range of 50-20k Hz. With a minimum frequency of 35Hz, the Ai41 can go significantly deeper on the low side and provide stronger bass compared to the YU6's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both Ai41 and YU6 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Fluance Ai41's and Kanto YU6's external dimensions. Fluance Ai41 has external dimensions of 27.7 x 16.5 x 19.3 cm ( 10.9 x 6.5 x 7.6 inches) whereas Kanto YU6 has external dimensions of 272.0 x 175.0 x 205.0mm ( 10.7 x 6.9 x 8.1inch) .
Fluance Ai41 is 10mm narrower and 12mm less deeper than Kanto YU6 but it is also 5mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Fluance Ai41 is approximately 318.0cm2 / 49.3inch2 and base area of the Kanto YU6 is approximately 358.8cm2 / 55.6inch2. The Ai41 requires 11% less surface area than the YU6 which gives it a small advantage on placement in tight spaces.