In this review, we will be comparing VELA BS 403 and 706 S3, two Passive Bookshelf speakers from ELAC and Bowers Wilkins.
Let's have a brief look at the main features
of ELAC VELA BS 403 and B&W 706 S3 first before getting into our more
detailed comparison.
ELAC VELA BS 403 Key Specs
- 2-way Design
- " handmade JET 5 folded ribbon tweeter Tweeter
- 6" Aluminum/Paper Woofer
- 41-50k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-100watts
- Weight:7.10kg
- Dimensions (H x W x D): 361.0" x 7-1/2" x 9-3/8"( 361.0 x 191.0 x 239.0mm )
B&W 706 S3 Key Specs
- 2-way Design
- 1" Decoupled Carbon Dome Tweeter
- 6.5" Continuum Woofer
- 50-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-120watts
- Weight:8.42kg
- Dimensions (H x W x D): 345.0" x 7.6" x 13.1"( 345.0 x 192.0 x 334.0mm )
What size room are the ELAC VELA BS 403 and B&W 706 S3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC VELA BS 403 |
B&W 706 S3 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC VELA BS 403 and B&W 706 S3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both VELA BS 403 and 706 S3 are 2-way speakers.
| Driver |
ELAC VELA BS 403 |
B&W 706 S3 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 6.5-inch
|
VELA BS 403 features a " handmade JET 5 folded ribbon tweeter Tweeter and 1 x 6" Aluminum/Paper Woofer . On the other hand, the 706 S3 features a 1" Decoupled Carbon Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
VELA BS 403 has a frequency range of 41-50k Hz whereas 706 S3 has a frequency range of 50-28k Hz. With a minimum frequency of 41Hz, the VELA BS 403 can go significantly deeper on the low side and provide stronger bass compared to the 706 S3's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
VELA BS 403 is a 4 ohms speaker compared to the 706 S3 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the VELA BS 403 can provide this impedance level.
These two speakers also have different sensitivity levels. VELA BS 403 sensitivity is rated at 86 dB and the 706 S3's is rated at 88 dB. This 2 dB difference makes the B&W 706 S3 a more sensitive speaker compared to ELAC VELA BS 403, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
VELA BS 403 can handle a max power of 120 watts RMS from the amp the whereas VELA BS 403 has a max power handling value of 100 watts RMS , 20 watts less than the 706 S3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both VELA BS 403 and 706 S3 features dual binding post speaker terminals for bi-amping or bi-wiring.
ELAC VELA BS 403's Binding post terminals allows Bi-amping or bi-wiring
B&W 706 S3's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
VELA BS 403 has a bottom firing port whereas 706 S3 has a rear firing ports. ELAC VELA BS 403's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to B&W 706 S3 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC VELA BS 403's and B&W 706 S3's external dimensions. ELAC VELA BS 403 has external dimensions of 361.0 x 191.0 x 239.0mm ( 24-28inch x 7-1/2inch x 9-3/8inch ) whereas B&W 706 S3 has external dimensions of 345.0 x 192.0 x 334.0mm ( 13.6-inch x 7.6-inch x 13.1-inch) .
ELAC VELA BS 403 is 1mm narrower and 95mm less deeper than B&W 706 S3 but it is also 16mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC VELA BS 403 is approximately 456.5cm2 / 70.8inch2 and base area of the B&W 706 S3 is approximately 641.3cm2 / 99.4inch2. The VELA BS 403 requires 29% less surface area than the 706 S3 which gives it a small advantage on placement in tight spaces.