In this review, we will be comparing Uni-Fi 2.0 UF52 and Uni-Fi FS U5 Slim, two Passive Floor-standing speakers by ELAC Let's have a brief look at the main features
of ELAC Uni-Fi 2.0 UF52 and ELAC Uni-Fi FS U5 Slim first before getting into our more
detailed comparison.
Uni-Fi 2.0 UF52 and Uni-Fi FS U5 Slim are members of ELAC's Uni-Fi series of speakers. Below you can find the loudspeakers from this series.
ELAC Uni-Fi Series History
What size room are the ELAC Uni-Fi 2.0 UF52 and ELAC Uni-Fi FS U5 Slim speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the ELAC Uni-Fi 2.0 UF52 and ELAC Uni-Fi FS U5 Slim compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Uni-Fi 2.0 UF52 and Uni-Fi FS U5 Slim are 3-way speakers.
Driver |
ELAC Uni-Fi 2.0 UF52 |
ELAC Uni-Fi FS U5 Slim |
Driver Setup
|
3-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 4-inch |
1 x 4-inch |
Woofer
|
3 x 5.25-inch
|
3 x 5.25-inch
|
Uni-Fi 2.0 UF52 features a 1" soft dome Tweeter , a 4" Midrange and 3 x 5.25" Aluminum Woofer with a Crossover frequency at 200hZ and 2000HZ. On the other hand, the Uni-Fi FS U5 Slim features a 1" soft dome Tweeter , a 4" Midrange and 3 x 5.25" Aluminum Woofer .
Frequency Response
Uni-Fi 2.0 UF52 has a frequency range of 42-35k Hz whereas Uni-Fi FS U5 Slim has a frequency range of 42-25k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Uni-Fi 2.0 UF52 is a 6 ohms speaker compared to the Uni-Fi FS U5 Slim which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Uni-Fi FS U5 Slim can provide this impedance level.
On the other hand, they have the same sensitivity of 85 dBdB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Uni-Fi 2.0 UF52 and Uni-Fi FS U5 Slim has the same power range of 40-140 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Uni-Fi 2.0 UF52 features Binding post type posts and Uni-Fi FS U5 Slim has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Uni-Fi 2.0 UF52's and ELAC Uni-Fi FS U5 Slim's external dimensions. ELAC Uni-Fi 2.0 UF52 has external dimensions of 999.0 x 232.0 x 323.0mm ( 39-5/16 x 9-1/8 x 12-11/16inch) whereas ELAC Uni-Fi FS U5 Slim has external dimensions of 1013.0 x 259.0 x 328.0mm ( 39-7/8 x 10-3/16 x 12-7/8inch) .
ELAC Uni-Fi FS U5 Slim is clearly the larger of the two speakers. Its body is 27mm wider, 14mm taller and 5mm deeper than ELAC Uni-Fi 2.0 UF52.
Below you can see the front view size comparison of ELAC Uni-Fi 2.0 UF52 and ELAC Uni-Fi FS U5 Slim in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Uni-Fi 2.0 UF52 is approximately 749.4cm2 / 116.2inch2 and base area of the ELAC Uni-Fi FS U5 Slim is approximately 849.5cm2 / 131.7inch2. The Uni-Fi 2.0 UF52 requires 12% less surface area than the Uni-Fi FS U5 Slim which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Uni-Fi 2.0 UF52 weighs 19.73kg / 43.4lbs and the ELAC Uni-Fi FS U5 Slim weighs 0.00kg / 0lbs. This makes the Uni-Fi 2.0 UF52 inf% heavier than the Uni-Fi FS U5 Slim.
Here is a comparison of how Uni-Fi 2.0 UF52 and Uni-Fi FS U5 Slim's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of ELAC Uni-Fi 2.0 UF52?
Here are the items that are included inside the box of Uni-Fi 2.0 UF52:
Floorstanding loudspeakerGrille4 Stabilizer-bars with spike feet4 Protective discs4 Knobs8 Machine screwsHex-key
What's in the Box of ELAC Uni-Fi FS U5 Slim?
Here are the items that come with the Uni-Fi FS U5 Slim:
Floorstanding loudspeakerGrille2 Stabilizer-bars4 Spike-feet4 Protective discs4 Knobs6 Machine screws4 Hex-nutsHex-keyOperating Instructions
Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
High Frequency Response |
35k Hz
vs
25k Hz
|
Generates higher frequency |
Height |
999mm
vs
1013mm
|
Easier to fit in smaller spaces |
Base Surface Area |
749cm2 (232x323mm)
vs
849cm2 (259x328mm)
|
Takes less floor space |
Price per pair* |
1400USD
vs
1720USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
ELAC Uni-Fi 2.0 UF52 |
ELAC Uni-Fi FS U5 Slim |
Brand |
ELAC |
ELAC |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
40-140 watts |
40-140 watts |
Sensitivity |
85 dB |
85 dB |
Impedance |
6 ohms |
4 ohms |
Frequency Response |
42-35k Hz |
42-25k Hz |
Drivers |
|
|
Woofer Quantity |
3 |
3 |
Woofer Size |
5.25" |
5.25" |
Woofer Composition |
Aluminum |
Aluminum |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
soft dome |
soft dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
4" |
4" |
Crossover Frequency |
200hZ and 2000HZ |
n/a |
Physical Specs |
|
|
Height |
999.0mm (39.3") |
1013.0mm (39.9") |
Width |
232.0mm (9.1") |
259.0mm (10.2") |
Depth |
323.0mm (12.7") |
328.0mm (12.9") |
Weight |
19.73kg (43.4lbs) |
0.00kg (0lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
Available Colors |
Black |
Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
3 Years |
3 Years |
Labor Warranty |
3 Years |
3 Years |