In this review, we will be comparing two different type of speakers by ELAC. ELAC Uni-Fi 2.0 UC52 is a Center Channel speaker whereas the Uni-Fi BS U5 Slim is a Bookshelf speaker.
Let's have a brief look at the main features
of ELAC Uni-Fi 2.0 UC52 and ELAC Uni-Fi BS U5 Slim first before getting into our more
detailed comparison.
ELAC Uni-Fi 2.0 UC52 Key Specs
- 3-way Design
- 1" soft dome Tweeter
- 4" Midrange
- 2 x 5.25" dished aluminum Woofer
- 48-35k Hz Frequency Response
- 85 dB Sensitivity
- Impedance: 6ohms
- Power Range:40-140watts
- Weight:11.70kg
- Dimensions (H x W x D): 186.0" x 21-7/16" x 11-9/16"( 186.0 x 545.0 x 294.0mm )
ELAC Uni-Fi BS U5 Slim Key Specs
- 3-way Design
- 1" soft dome Tweeter
- 4" Midrange
- 5.25" Aluminum Woofer
- 4" Midrange
- 46-25k Hz Frequency Response
- 85 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-140watts
- Weight:7.50kg
- Dimensions (H x W x D): 340.0" x 7-1/16" x 12-7/8"( 340.0 x 180.0 x 328.0mm )
ni-Fi 2.0 UC52 and Uni-Fi BS U5 Slim are members of ELAC's Uni-Fi series of speakers. Below you can find the loudspeakers from this series.
ELAC Uni-Fi Series
History
What size room are the ELAC Uni-Fi 2.0 UC52 and ELAC Uni-Fi BS U5 Slim speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Uni-Fi 2.0 UC52 |
ELAC Uni-Fi BS U5 Slim |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Uni-Fi 2.0 UC52 and ELAC Uni-Fi BS U5 Slim compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ni-Fi 2.0 UC52 and Uni-Fi BS U5 Slim are 3-way speakers.
| Driver |
ELAC Uni-Fi 2.0 UC52 |
ELAC Uni-Fi BS U5 Slim |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
1 x 4-inch |
|
Woofer
|
2 x 5.25-inch
|
1 x 5.25-inch
|
ni-Fi 2.0 UC52 features a 1" soft dome Tweeter , a 4" Midrange and 2 x 5.25" dished aluminum Woofer with a Crossover frequency at 200hZ and 2000HZ. On the other hand, the Uni-Fi BS U5 Slim features a 1" soft dome Tweeter , a 4" Midrange and 1 x 5.25" Aluminum Woofer .
Frequency Response
ni-Fi 2.0 UC52 has a frequency range of 48-35k Hz whereas Uni-Fi BS U5 Slim has a frequency range of 46-25k Hz. With a minimum frequency of 46Hz, the Uni-Fi BS U5 Slim can go slightly deeper then the ni-Fi 2.0 UC52's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ni-Fi 2.0 UC52 is a 6 ohms speaker compared to the Uni-Fi BS U5 Slim which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Uni-Fi BS U5 Slim can provide this impedance level.
On the other hand, they have the same sensitivity of 85 dBdB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
ni-Fi 2.0 UC52 and Uni-Fi BS U5 Slim has the same power range of 40-140 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ni-Fi 2.0 UC52 features Post type posts and Uni-Fi BS U5 Slim has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Uni-Fi 2.0 UC52's 5-Way post terminals
ELAC Uni-Fi BS U5 Slim's Post terminals
Cabinet Type and Port Position
ni-Fi 2.0 UC52 has a front firing port whereas Uni-Fi BS U5 Slim has a rear firing ports. ELAC Uni-Fi 2.0 UC52's front-firing port gives more flexibility in placement in regards to proximity to walls compared to ELAC Uni-Fi BS U5 Slim with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Uni-Fi 2.0 UC52's and ELAC Uni-Fi BS U5 Slim's external dimensions. ELAC Uni-Fi 2.0 UC52 has external dimensions of 186.0 x 545.0 x 294.0mm ( 7-5/16 x 21-7/16 x 11-9/16inch) whereas ELAC Uni-Fi BS U5 Slim has external dimensions of 340.0 x 180.0 x 328.0mm ( 13-3/8 x 7-1/16 x 12-7/8inch) .
ELAC Uni-Fi 2.0 UC52 is 154mm shorter and 34mm less deeper than ELAC Uni-Fi BS U5 Slim but it is also 365mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Uni-Fi 2.0 UC52 is approximately 1602.3cm2 / 248.4inch2 and base area of the ELAC Uni-Fi BS U5 Slim is approximately 590.4cm2 / 91.5inch2. The ni-Fi 2.0 UC52 requires 171% more surface area than the Uni-Fi BS U5 Slim which gives it a small disadvantage on placement in tight spaces.
What's in the Box of ELAC Uni-Fi 2.0 UC52?
Here are the items that are included inside the box of ni-Fi 2.0 UC52:
Center channel loudspeakerGrilleOperating Instructions
What's in the Box of ELAC Uni-Fi BS U5 Slim?
Here are the items that come with the Uni-Fi BS U5 Slim:
2 Bookshelf loudspeakers 2 Grilles Operating Instructions