In this review, we will be comparing Uni-Fi 2.0 UB52 and Uni-Fi UB5, two Passive Bookshelf speakers by ELAC.
Let's have a brief look at the main features
of ELAC Uni-Fi 2.0 UB52 and ELAC Uni-Fi UB5 first before getting into our more
detailed comparison.
| Key Specs | ELAC Uni-Fi 2.0 UB52 | ELAC Uni-Fi UB5 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 1" soft dome | 1" Soft-dome |
|---|
| Midrange | 4" | 4" |
|---|
| Woofer | 5.25" Aluminum | 5.25" Aluminum |
|---|
| Frequency response | 46-35k Hz | 46-25k Hz |
|---|
| Sensitivity | 85 dB | 85 dB |
|---|
| Impedance | 6 ohms | 4 ohms |
|---|
| Power range | 40-140 watts | 40-140 watts |
|---|
| Weight | 8.30kg / 18.3lbs | 7.48kg / 16.5lbs |
|---|
| Dimensions (H x W x D) | 13-5/8" x 7-5/16" x 11-11/16"
347.0 x 186.0 x 297.0mm | 12.7" x 7.8" x 10.7"
324.0 x 200.0 x 273.0mm |
|---|
Uni-Fi 2.0 UB52 and Uni-Fi UB5 are members of ELAC's Uni-Fi series of speakers. Below you can find the loudspeakers from this series.
ELAC Uni-Fi Series
History
What size room are the ELAC Uni-Fi 2.0 UB52 and ELAC Uni-Fi UB5 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Uni-Fi 2.0 UB52 |
ELAC Uni-Fi UB5 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Uni-Fi 2.0 UB52 and Uni-Fi UB5 are 3-way speakers.
ELAC Uni-Fi 2.0 UB52ELAC Uni-Fi UB5
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
ELAC Uni-Fi 2.0 UB52 |
ELAC Uni-Fi UB5 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
1 x 4-inch |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
Uni-Fi 2.0 UB52 features a 1" soft dome Tweeter, a 4" Midrange and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 200hZ and 2000HZ. On the other hand, the Uni-Fi UB5 features a 1" Soft-dome Tweeter, a 4" Midrange and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 270Hz and 2700Hz.
Frequency Response
Uni-Fi 2.0 UB52 has a frequency range of 46-35k Hz whereas Uni-Fi UB5 has a frequency range of 46-25k Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Uni-Fi 2.0 UB52 is a 6 ohms speaker compared to the Uni-Fi UB5 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Uni-Fi UB5 can provide this impedance level.
On the other hand, they have the same sensitivity of 85 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Uni-Fi 2.0 UB52 and Uni-Fi UB5 have the same power range of 40-140 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Uni-Fi 2.0 UB52 features Post type posts and Uni-Fi UB5 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Uni-Fi 2.0 UB52's 5-way post terminals
ELAC Uni-Fi UB5's Post terminals
Cabinet Type and Port Position
Uni-Fi 2.0 UB52 has a front firing port whereas Uni-Fi UB5 has a rear firing ports. ELAC Uni-Fi 2.0 UB52's front-firing port gives more flexibility in placement in regards to proximity to walls compared to ELAC Uni-Fi UB5 with its rear-firing port.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Uni-Fi 2.0 UB52's and ELAC Uni-Fi UB5's external dimensions. ELAC Uni-Fi 2.0 UB52 has external dimensions of 347.0 x 186.0 x 297.0mm (13-5/8 x 7-5/16 x 11-11/16inch) whereas ELAC Uni-Fi UB5 has external dimensions of 324.0 x 200.0 x 273.0mm (12.7 x 7.8 x 10.7inch).
ELAC Uni-Fi UB5 is 23mm shorter and 24mm less deeper than ELAC Uni-Fi 2.0 UB52 but it is also 14mm wider.
Below you can see the front view size comparison of ELAC Uni-Fi 2.0 UB52 and ELAC Uni-Fi UB5 in scale.
Comparison image of ELAC Uni-Fi 2.0 UB52 and ELAC Uni-Fi UB5 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Uni-Fi 2.0 UB52 is approximately 552.4cm2 / 85.6inch2 and base area of the ELAC Uni-Fi UB5 is approximately 546.0cm2 / 84.6inch2. The Uni-Fi 2.0 UB52 requires 1% more surface area than the Uni-Fi UB5 which gives it a small disadvantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of ELAC Uni-Fi 2.0 UB52 and ELAC Uni-Fi UB5 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Uni-Fi 2.0 UB52 weighs 8.30kg / 18.3lbs and the ELAC Uni-Fi UB5 weighs 7.48kg / 16.5lbs. This makes the Uni-Fi 2.0 UB52 11% heavier than the Uni-Fi UB5.
Here is a comparison of how Uni-Fi 2.0 UB52 and Uni-Fi UB5's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of ELAC Uni-Fi 2.0 UB52?
Here are the items that are included inside the box of Uni-Fi 2.0 UB52:
- 2 Bookshelf loudspeakers
- 2 Grilles
- Operating Instructions
What's in the Box of ELAC Uni-Fi UB5?
Here are the items that come with the Uni-Fi UB5:
- 2 Bookshelf loudspeakers
- 2 Grilles
- Operating Instructions
 Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
 High Frequency Response |
35k Hz
vs
25k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
324mm
vs
347mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
546cm2
vs
552cm2
|
Takes less floor space |
| General |
ELAC Uni-Fi 2.0 UB52 |
ELAC Uni-Fi UB5 |
| Brand |
ELAC |
ELAC |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
40-140 watts |
40-140 watts |
| Sensitivity |
85 dB |
85 dB |
| Impedance |
6 ohms |
4 ohms |
| Frequency Response |
46-35k Hz |
46-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
5.25" |
| Woofer Composition |
Aluminum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
soft dome |
Soft-dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
4" |
4" |
| Crossover Frequency |
200hZ and 2000HZ |
270Hz and 2700Hz |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
347.0mm (13.7") |
324.0mm (12.8") |
| Width |
186.0mm (7.3") |
200.0mm (7.9") |
| Depth |
297.0mm (11.7") |
273.0mm (10.7") |
| Weight |
8.30kg (18.3lbs) |
7.48kg (16.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
| Available Colors |
Black |
Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
24-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
3 Years |
3 Years |
| Labor Warranty |
3 Years |
3 Years |
Siblings in ELAC's Uni-Fi series, so they share a family sound. It comes down to size, output and price.
| Area | Better | Why |
|---|
| Bass |
evenly matched |
Much the same reach (46Hz vs 46Hz). |
| Amplifier needs |
evenly matched |
Similar sensitivity (85dB vs 85dB) - both want much the same power. |
| Amplifier match |
A |
ELAC Uni-Fi 2.0 UB52 is the easier load at 6 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom |
evenly matched |
Similar power handling (140W vs 140W). |
| Size |
depends |
Similar cabinet size - neither is easier to fit. |
A ELAC Uni-Fi 2.0 UB52
B ELAC Uni-Fi UB5
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
ELAC Uni-Fi 2.0 UB52 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If your amplifier is modest, vintage or valve-based, ELAC Uni-Fi 2.0 UB52 is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.