In this review, we will be comparing two different type of speakers by ELAC. ELAC Debut Reference DCR52 is a Center Channel speaker whereas the DBR62 is a Bookshelf speaker.
Let's have a brief look at the main features
of ELAC Debut Ref DCR52 and ELAC Debut Ref DBR62 first before getting into our more
detailed comparison.
ELAC Debut Ref DCR52 Key Specs
- 2-way Design
- 1" dome Tweeter
- 2 x 5.25" aramid fiber Woofer
- 55-35k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 120watts
- Weight:10.14kg
- Dimensions (H x W x D): 188.0" x 20-13/16" x 9-9/16"( 188.0 x 529.0 x 243.0mm )
ELAC Debut Ref DBR62 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6.5" Aramid fiber Woofer
- 44-35k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 120watts
- Weight:8.23kg
- Dimensions (H x W x D): 362.0" x 8-1/4" x 10-7/8"( 362.0 x 210.0 x 277.0mm )
DCR52 and DBR62 are members of ELAC's Debut Reference series of speakers. Below you can find the loudspeakers from this series.
ELAC Debut Reference Series
History
What size room are the ELAC Debut Ref DCR52 and ELAC Debut Ref DBR62 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut Ref DCR52 |
ELAC Debut Ref DBR62 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Debut Ref DCR52 and ELAC Debut Ref DBR62 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both DCR52 and DBR62 are 2-way speakers.
| Driver |
ELAC Debut Ref DCR52 |
ELAC Debut Ref DBR62 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
1 x 6.5-inch
|
DCR52 features a 1" cloth dome Tweeter and 2 x 5.25" aramid fiber Woofer . On the other hand, the DBR62 features a 1" Soft-Dome Tweeter and 1 x 6.5" Aramid fiber Woofer .
Frequency Response
DCR52 has a frequency range of 55-35k Hz whereas DBR62 has a frequency range of 44-35k Hz. With a minimum frequency of 44Hz, the DBR62 can go significantly deeper on the low side and provide stronger bass compared to the DCR52's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
DCR52 is a 8 ohms speaker compared to the DBR62 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. DCR52 sensitivity is rated at 87 dB and the DBR62's is rated at 86 dB. This 1 dB difference makes the ELAC Debut Ref DCR52 a more sensitive speaker compared to ELAC Debut Ref DBR62, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
DCR52 and DBR62 has the same power range of up to 120 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
DCR52 features 5-way post type posts and DBR62 has a 5-way post type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Debut Ref DCR52's 5-Way post terminals
ELAC Debut Ref DBR62's 5-way post terminals
Cabinet Type and Port Position
Both DCR52 and DBR62 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut Ref DCR52's and ELAC Debut Ref DBR62's external dimensions. ELAC Debut Ref DCR52 has external dimensions of 188.0 x 529.0 x 243.0mm ( 7-3/8 x 20-13/16 x 9-9/16inch) whereas ELAC Debut Ref DBR62 has external dimensions of 362.0 x 210.0 x 277.0mm ( 14-1/4 x 8-1/4 x 10-7/8inch) .
ELAC Debut Ref DCR52 is 174mm shorter and 34mm less deeper than ELAC Debut Ref DBR62 but it is also 319mm wider.
Below you can see the front view size comparison of ELAC Debut Ref DCR52 and ELAC Debut Ref DBR62 in scale.
Comparison image of ELAC Debut Ref DCR52 and ELAC Debut Ref DBR62 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut Ref DCR52 is approximately 1285.5cm2 / 199.3inch2 and base area of the ELAC Debut Ref DBR62 is approximately 581.7cm2 / 90.2inch2. The DCR52 requires 121% more surface area than the DBR62 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of ELAC Debut Ref DCR52?
Here are the items that are included inside the box of DCR52:
Center-channel loudspeakerGrilleOperating Instructions
What's in the Box of ELAC Debut Ref DBR62?
Here are the items that come with the DBR62:
2 Bookshelf loudspeakers 2 Grilles Operating Instructions