SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

ELAC Debut 2.0 B6.2 vs PSB P3 Comparison

x
Speaker to replace
Change

ELAC Debut 2.0 B6.2

Passive Bookshelf | 44-35k Hz

ELAC Debut 2.0 B6.2
CHECK PRICE
Change
    
PSB P3

Passive Bookshelf | 57-21k Hz

PSB Alpha P3
CHECK PRICE
ELAC Debut 2.0 B6.2 ELAC Debut 2.0 B6.2
See at AMAZON
PSB P3 PSB P3
See at AMAZON
ELAC Debut 2.0 B6.2
See at AMAZON
PSB P3
See at AMAZON
ELAC Debut 2.0 B6.2 vs PSB P3 Speaker Comparison

In this review, we will be comparing Debut 2.0 B6.2 and Alpha P3, two Passive Bookshelf speakers from ELAC and PSB.

Let's have a brief look at the main features of ELAC Debut 2.0 B6.2 and PSB P3 first before getting into our more detailed comparison.

ELAC Debut 2.0 B6.2 Key Specs

  • 2-way Design
  • 1" Soft-Dome Tweeter
  • 6.5" Woven Aramid-Fiber Woofer
  • 44-35k Hz Frequency Response
  • 87 dB Sensitivity
  • Impedance: 6ohms
  • Power Range:up to 120watts
  • Weight:7.40kg
  • Dimensions (H x W x D): 375.0" x 7-3/4" x 11-5/16"( 375.0 x 195.0 x 268.0mm )

PSB P3 Key Specs

  • 2-way Design
  • 0.75" Hard-Dome Tweeter
  • 4.5" Polypropylene Woofer
  • 57-21k Hz Frequency Response
  • 87 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:10-80watts
  • Weight:2.23kg
  • Dimensions (H x W x D): 223.0" x 5-3/16" x 7-5/16"( 223.0 x 132.0 x 186.0mm )

What size room are the ELAC Debut 2.0 B6.2 and PSB P3 speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* ELAC Debut 2.0 B6.2 PSB P3
Near-field Poor Average
Small Room Average Good
Mid-size Room Good Average
Large Room Average Poor
Very Large Room Poor Bad

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 B6.2 and PSB P3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both Debut 2.0 B6.2 and Alpha P3 are 2-way speakers.

Driver ELAC Debut 2.0 B6.2 PSB P3
Driver Setup 2-way 2-way
Tweeter 1-inch 0.75-inch
Midrange - -
Woofer 1 x 6.5-inch 1 x 4.5-inch

Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the Alpha P3 features a 0.75" anodized aluminum Hard-Dome Tweeter and 1 x 4.5" Polypropylene Woofer with a Crossover frequency at 3000Hz.

Frequency Response

Debut 2.0 B6.2 has a frequency range of 44-35k Hz whereas Alpha P3 has a frequency range of 57-21k Hz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go significantly deeper on the low side and provide stronger bass compared to the Alpha P3's min frequency of 57Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

Debut 2.0 B6.2
Alpha P3
Min
Average
Max
High Frequency

Bookshelf Speakers

ELAC Debut 2.0 B6.2
PSB P3
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

Debut 2.0 B6.2 is a 6 ohms speaker compared to the Alpha P3 which has a nominal impedance of 8 ohms.

On the other hand, they have the same sensitivity of 87 dBdB.

Sensitivity

Bookshelf Speakers

Debut 2.0 B6.2
Alpha P3
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

Debut 2.0 B6.2 can handle a max power of 120 watts RMS from the amp the whereas Alpha P3 has a max power handling value of 80 watts RMS, 40 watts less than the Debut 2.0 B6.2.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

Debut 2.0 B6.2 features 5-way post type posts and Alpha P3 has a 5-way post type posts. None of these speakers feature bi-amping/bi-wiring.

ELAC Debut 2.0 B6.2 Terminals
ELAC Debut 2.0 B6.2's 5-Way post terminals

PSB P3 Terminals
PSB P3's 5-way post terminals

Cabinet Type and Port Position

Debut 2.0 B6.2 has a front firing port whereas Alpha P3 has a rear firing ports. ELAC Debut 2.0 B6.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to PSB P3 with its rear-firing port.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B6.2's and PSB P3's external dimensions. ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) whereas PSB P3 has external dimensions of 223.0 x 132.0 x 186.0mm ( 8-3/4 x 5-3/16 x 7-5/16inch) .

ELAC Debut 2.0 B6.2 is clearly the larger of the two speakers. Its body is 63mm wider, 152mm taller and 82mm deeper than PSB P3.

Below you can see the front view size comparison of ELAC Debut 2.0 B6.2 and PSB P3 in scale.

ELAC Debut 2.0 B6.2 vs PSB P3 Size Comparison - Front View
Comparison image of ELAC Debut 2.0 B6.2 and PSB P3 Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2 and base area of the PSB P3 is approximately 245.5cm2 / 38.1inch2. The Debut 2.0 B6.2 requires 113% more surface area than the Alpha P3 which gives it a small disadvantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

ELAC Debut 2.0 B6.2 vs PSB P3 Size Comparison on a Media Console
Size Comparison image of ELAC Debut 2.0 B6.2 and PSB P3 on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs and the PSB P3 weighs 2.23kg / 4.9lbs. This makes the Debut 2.0 B6.2 232% heavier than the Alpha P3.

Here is a comparison of how Debut 2.0 B6.2 and Alpha P3's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
ELAC Debut 2.0 B6.2
PSB P3
Min
Average
Max

What's in the Box of ELAC Debut 2.0 B6.2?

Here are the items that are included inside the box of Debut 2.0 B6.2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • Operating Instructions
  • What's in the Box of PSB P3?

    Here are the items that come with the Alpha P3:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • 8 Self-adhesive rubber feet
  • Quick Start Guide
  • Warranty Card

  • Reasons to choose ELAC Debut 2.0 B6.2 over PSB Alpha P3
    Max Input Power 120 watts vs 80 watts Handle more power from your amplifier
    Woofer Size 6.5 inches vs 4.5 inches Larger woofer
    Low Frequency Response 44 Hz vs 57 Hz Generates deeper bass
    High Frequency Response 35k Hz vs 21k Hz Generates higher frequency
    Port Position Front vs Rear Gives more flexibility placing close to walls

    Reasons to choose PSB Alpha P3 over ELAC Debut 2.0 B6.2

    Nominal Impedance 8 ohms vs 6 ohms Less selective with amplifiers
    Height 223mm vs 375mm Easier to fit in smaller spaces
    Base Surface Area 245cm2 vs 522cm2 Takes less floor space
    Price per pair* 279USD vs 400USD costs less (*prices may change depending on the seller, location and time)
    ELAC Debut 2.0 B6.2 vs PSB P3 Specs Table
    Detailed comparison of specifications
    General ELAC Debut 2.0 B6.2 PSB Alpha P3
    Brand ELAC PSB
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range up to 120 watts 10-80 watts
    Sensitivity 87 dB 87 dB
    Impedance 6 ohms 8 ohms
    Impedance n/a 4 ohms
    Frequency Response 44-35k Hz 57-21k Hz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 6.5" 4.5"
    Woofer Composition Woven Aramid-Fiber Polypropylene
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 0.75"
    Tweeter Type Soft-Dome Hard-Dome
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency 2200Hz 3000Hz
    Firing Direction front rear
    Physical Specs
    Height 375.0mm (14.8") 223.0mm (8.8")
    Width 195.0mm (7.7") 132.0mm (5.2")
    Depth 268.0mm (10.6") 186.0mm (7.3")
    Weight 7.40kg (16.3lbs) 2.23kg (4.9lbs)
    Enclosure Ported Bass Reflex
    Finish MDF/Vinyl MDF, Wood-grain vinyl
    Available Colors Black Walnut,Black Ash
    Mounting Bracket No No
    Recommended Stand Height 24-28" 28-30"
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs No No
    Other
    Parts Warranty 3 Years 5 Years
    Labor Warranty 3 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction