In this review, we will be comparing Debut 2.0 B6.2 and S 803, two Passive Bookshelf speakers from ELAC and Jamo.
Let's have a brief look at the main features
of ELAC Debut 2.0 B6.2 and Jamo S 803 first before getting into our more
detailed comparison.
| Key Specs | ELAC Debut 2.0 B6.2 | Jamo S 803 |
|---|
| Brand | ELAC Germany · founded 1926 | Jamo Denmark · founded 1966 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Soft-Dome | 1" Soft-Dome |
|---|
| Woofer | 6.5" Woven Aramid-Fiber | 5" Aluminized Polyfiber |
|---|
| Frequency response | 44-35k Hz | 57-26k Hz |
|---|
| Sensitivity | 87 dB | 87 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 120 watts | up to 80 watts |
|---|
| Weight | 7.40kg / 16.3lbs | 5.40kg / 11.9lbs |
|---|
| Dimensions (H x W x D) | 14.8" x 7-3/4" x 10-9/16" 375.0 x 195.0 x 268.0mm | 13.8" x 7.5" x 9.9" 353.0 x 191.0 x 252.0mm |
|---|
What size room are the ELAC Debut 2.0 B6.2 and Jamo S 803 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 2.0 B6.2 |
Jamo S 803 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Debut 2.0 B6.2 and S 803 are 2-way speakers.
ELAC Debut 2.0 B6.2Jamo S 803
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
ELAC Debut 2.0 B6.2 |
Jamo S 803 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 5-inch
|
Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the S 803 features a 1" Soft-Dome Tweeter and 1 x 5" Aluminized Polyfiber Woofer.
Frequency Response
Debut 2.0 B6.2 has a frequency range of 44-35k Hz whereas S 803 has a frequency range of 57-26k Hz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go significantly deeper on the low side and provide stronger bass compared to the S 803's min frequency of 57Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 B6.2 is a 6 ohms speaker compared to the S 803 which has a nominal impedance of 8 ohms.
On the other hand, they have the same sensitivity of 87 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Debut 2.0 B6.2 can handle a max power of 120 watts RMS, whereas S 803 has a max power handling value of 80 watts RMS, 40 watts less than the Debut 2.0 B6.2.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Debut 2.0 B6.2 features Post type posts and S 803 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Debut 2.0 B6.2's 5-Way post terminals
Jamo S 803's Post terminals
Cabinet Type and Port Position
Both Debut 2.0 B6.2 and S 803 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B6.2's and Jamo S 803's external dimensions. ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm (14.7 x 7.6 x 10.5inch) whereas Jamo S 803 has external dimensions of 353.0 x 191.0 x 252.0mm (13.8 x 7.5 x 9.9inch).
ELAC Debut 2.0 B6.2 is clearly the larger of the two speakers. Its body is 4mm wider, 22mm taller and 16mm deeper than Jamo S 803.
Below you can see the front view size comparison of ELAC Debut 2.0 B6.2 and Jamo S 803 in scale.
Comparison image of ELAC Debut 2.0 B6.2 and Jamo S 803 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2 and base area of the Jamo S 803 is approximately 481.3cm2 / 74.6inch2. The Debut 2.0 B6.2 requires 9% more surface area than the S 803 which gives it a small disadvantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of ELAC Debut 2.0 B6.2 and Jamo S 803 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs and the Jamo S 803 weighs 5.40kg / 11.9lbs. This makes the Debut 2.0 B6.2 37% heavier than the S 803.
Here is a comparison of how Debut 2.0 B6.2 and S 803's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of ELAC Debut 2.0 B6.2?
Here are the items that are included inside the box of Debut 2.0 B6.2:
- 2 Bookshelf loudspeakers
- 2 Grilles
- Operating Instructions
What's in the Box of Jamo S 803?
Here are the items that come with the S 803:
- 2 Bookshelf loudspeakers
- 2 Grilles
- User Manual
- Important Safety Instructions
- Warranty Information
Max Input Power |
120 watts
vs
80 watts
|
Handle more power from your amplifier |
Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
44 Hz
vs
57 Hz
|
Generates deeper bass |
High Frequency Response |
35k Hz
vs
26k Hz
|
Generates higher frequency |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Height |
353mm
vs
375mm
|
Easier to fit in smaller spaces |
Base Surface Area |
481cm2
vs
522cm2
|
Takes less floor space |
Price per pair* |
229USD
vs
400USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
ELAC Debut 2.0 B6.2 |
Jamo S 803 |
| Brand |
ELAC |
Jamo |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
up to 120 watts |
up to 80 watts |
| Sensitivity |
87 dB |
87 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
44-35k Hz |
57-26k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
5" |
| Woofer Composition |
Woven Aramid-Fiber |
Aluminized Polyfiber |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2200Hz |
n/a |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
375.0mm (14.8") |
353.0mm (13.9") |
| Width |
195.0mm (7.7") |
191.0mm (7.5") |
| Depth |
268.0mm (10.6") |
252.0mm (9.9") |
| Weight |
7.40kg (16.3lbs) |
5.40kg (11.9lbs) |
| Enclosure |
Ported |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Vinyl |
| Available Colors |
Black |
Walnut, Black, White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
24-28" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
3 Years |
5 Years |
| Labor Warranty |
3 Years |
5 Years |
These sit in different price classes - ELAC Debut 2.0 B6.2 costs roughly 1.7x what Jamo S 803 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | ELAC Debut 2.0 B6.2 digs deeper - 44Hz against 57Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (87dB vs 87dB) - both want much the same power. |
| Amplifier match | B | Jamo S 803 is the easier load at 8 ohms. |
| Headroom | A | ELAC Debut 2.0 B6.2 takes more power (120W vs 80W) - more in hand in a big room. |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | Neither adds bi-amping, a sub output or height drivers. ELAC Debut 2.0 B6.2 sits in a wider range (11 models), so a matched surround system is easier later. |
| Price | B | Jamo S 803 is cheaper - $229 against $400, about 43% less; arguably a different class. |
A ELAC Debut 2.0 B6.2 B Jamo S 803
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
ELAC Debut 2.0 B6.2 is ahead, but only on 1 of the measured areas, and it costs about 75% more. That is a lot of money for a narrow margin on paper - Jamo S 803 looks like the sensible buy unless something else about the ELAC Debut 2.0 B6.2 appeals to you. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 57Hz anyway, which makes the cheaper Jamo S 803 much easier to justify. Match it to your room: we rate ELAC Debut 2.0 B6.2 the better fit for a mid-size room and a large room, and Jamo S 803 for near-field listening and a small room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.