In this review, we will be comparing Emit 30 and Imagine X2T, two Passive Floor-standing speakers from Dynaudio and PSB.
Let's have a brief look at the main features
of Dynaudio Emit 30 and PSB Imagine X2T first before getting into our more
detailed comparison.
| Key Specs | Dynaudio Emit 30 | PSB Imagine X2T |
|---|
| Brand | Dynaudio
Denmark · founded 1977 | PSB
Canada · founded 1972 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 1.1" Soft-Dome | 1" Dome |
|---|
| Midrange | — | 5.25" |
|---|
| Woofer | 2 x 5.5" MSP | 2 x 6.2" Clay/Ceramic/Poly |
|---|
| Frequency response | 45-25k Hz | 30-23k Hz |
|---|
| Sensitivity | 88 dB | 90 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | — | 20-200 watts |
|---|
| Weight | 15.50kg / 34.1lbs | 23.60kg / 51.9lbs |
|---|
| Dimensions (H x W x D) | 35-7/16" x 6-11/16" x 10-11/16"
900.0 x 170.0 x 272.0mm | 40-1/8" x 9" x 16-3/4"
1020.0 x 229.0 x 426.0mm |
|---|
What size room are the Dynaudio Emit 30 and PSB Imagine X2T speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Dynaudio Emit 30 |
PSB Imagine X2T |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Emit 30 and Imagine X2T are 3-way speakers.
Dynaudio Emit 30PSB Imagine X2T
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Dynaudio Emit 30 |
PSB Imagine X2T |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
2 x 5.5-inch
|
2 x 6.2-inch
|
Emit 30 features a 1.1" Cerotar Soft-Dome Tweeter and 2 x 5.5" MSP Woofer with a Crossover frequency at (1000)/3500 Hz. On the other hand, the Imagine X2T features a 1" titanium with neodymium magnets Dome Tweeter, a 5.25" Midrange and 2 x 6.2" Clay/Ceramic/Poly Woofer with a Crossover frequency at 500Hz and 2200Hz.
Frequency Response
Emit 30 has a frequency range of 45-25k Hz whereas Imagine X2T has a frequency range of 30-23k Hz. With a minimum frequency of 30Hz, the Imagine X2T can go significantly deeper on the low side and provide stronger bass compared to the Emit 30's min frequency of 45Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Emit 30 is a 4 ohms speaker compared to the Imagine X2T which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Emit 30 can provide this impedance level.
These two speakers also have different sensitivity levels. Emit 30 sensitivity is rated at 88 dB and the Imagine X2T's is rated at 90 dB. This 2 dB difference makes the PSB Imagine X2T a more sensitive speaker compared to Dynaudio Emit 30, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Imagine X2T features 5-Way post posts which make bi-amping or bi-wiring possible. Emit 30 has a Binding post which doesn't feature bi-amping/bi-wiring.
PSB Imagine X2T's 5-Way post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Emit 30 has a rear firing port whereas Imagine X2T has a front firing ports. PSB Imagine X2T's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Dynaudio Emit 30 with its rear-firing port.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Emit 30's and PSB Imagine X2T's external dimensions. Dynaudio Emit 30 has external dimensions of 900.0 x 170.0 x 272.0mm (35-7/16 x 6-11/16 x 10-11/16inch) whereas PSB Imagine X2T has external dimensions of 1020.0 x 229.0 x 426.0mm (40-1/8 x 9 x 16-3/4inch).
PSB Imagine X2T is clearly the larger of the two speakers. Its body is 59mm wider, 120mm taller and 154mm deeper than Dynaudio Emit 30.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
PSB Imagine X2T needs about 111% more floor or shelf area. PSB Imagine X2T is 154mm deeper, so it stands that much further out from the wall. PSB Imagine X2T is 120mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Emit 30 is approximately 462.4cm2 / 71.7inch2 and base area of the PSB Imagine X2T is approximately 975.5cm2 / 151.2inch2. The Emit 30 requires 53% less surface area than the Imagine X2T which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Dynaudio Emit 30 weighs 15.50kg / 34.1lbs and the PSB Imagine X2T weighs 23.60kg / 51.9lbs. This makes the Imagine X2T 52% heavier than the Emit 30.
Here is a comparison of how Emit 30 and Imagine X2T's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of PSB Imagine X2T?
Here are the items that come with the Imagine X2T:
- Floor-standing speaker
- Grille
- 4 Rubber feet
- 4 Spiked Feet
- Wrench
- Quick Start Guide
- Warranty Card
 High Frequency Response |
25k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
900mm
vs
1020mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
462cm2
vs
975cm2
|
Takes less floor space |
 Max Input Power |
200 watts
vs
180 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Woofer Size |
6.2 inches
vs
5.5 inches
|
Larger woofer |
|
Low Frequency Response |
30 Hz
vs
45 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Price per pair* |
1500USD
vs
1699USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Dynaudio Emit 30 |
PSB Imagine X2T |
| Brand |
Dynaudio |
PSB |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Sensitivity |
88 dB |
90 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
45-25k Hz |
30-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.5" |
6.2" |
| Woofer Composition |
MSP |
Clay/Ceramic/Poly |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
Soft-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5.25" |
| Crossover Frequency |
(1000)/3500 Hz |
500Hz and 2200Hz |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
900.0mm (35.4") |
1020.0mm (40.2") |
| Width |
170.0mm (6.7") |
229.0mm (9") |
| Depth |
272.0mm (10.7") |
426.0mm (16.8") |
| Weight |
15.50kg (34.1lbs) |
23.60kg (51.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain |
| Available Colors |
n/a |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
A generation apart: Dynaudio Emit 30 is the newer design, against a 2013 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | B | PSB Imagine X2T digs deeper - 30Hz against 45Hz. |
| Amplifier needs | B | PSB Imagine X2T is more sensitive (90dB vs 88dB), so it goes louder on the same amplifier. |
| Amplifier match | B | PSB Imagine X2T is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | evenly matched | Similar power handling (180W vs 200W). |
| Size | depends | Dynaudio Emit 30 is easier to place; PSB Imagine X2T is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | B | PSB Imagine X2T: bi-amping. |
| Price | B | PSB Imagine X2T is cheaper - $1,500 against $1,699, about 12% less. |
A Dynaudio Emit 30 B PSB Imagine X2T
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
PSB Imagine X2T is the easier recommendation: it leads on most of the measured areas and costs less. Take Dynaudio Emit 30 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 45Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Dynaudio Emit 30 the better fit for a small room, and PSB Imagine X2T for a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.