In this review, we will be comparing two different type of speakers by Dynaudio. Dynaudio Contour 30i is a Floor-standing speaker whereas the Contour 25Ci is a Center Channel speaker.
Let's have a brief look at the main features
of Dynaudio Contour 30i and Dynaudio Contour 25Ci first before getting into our more
detailed comparison.
Dynaudio Contour 30i Key Specs
- 3-way Design
- 1.1" Soft-Dome Tweeter
- 2 x 7" MSP Woofer
- 32-23k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Weight:31.40kg
- Dimensions (H x W x D): 44-7/8" x 8-7/16" x 14-3/16" ( 1140.0 x 215.0 x 360.0mm )
Dynaudio Contour 25Ci Key Specs
- 3-way Design
- 1.1" Soft-Dome Tweeter
- 2 x 7" MSP Woofer
- 35-23k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Weight:24.00kg
- Dimensions (H x W x D): 8-7/16" x 29-1/2" x 15-9/16" ( 215.0 x 750.0 x 396.0mm )
Contour 30i and Contour 25Ci are members of Dynaudio's Contour i series of speakers. Below you can find the loudspeakers from this series.
Dynaudio Contour i Series
History
What size room are the Dynaudio Contour 30i and Dynaudio Contour 25Ci speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Dynaudio Contour 30i |
Dynaudio Contour 25Ci |
| Near-field |
Poor |
Good |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Dynaudio Contour 30i and Dynaudio Contour 25Ci compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Contour 30i and Contour 25Ci are 3-way speakers.
| Driver |
Dynaudio Contour 30i |
Dynaudio Contour 25Ci |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 7-inch
|
2 x 7-inch
|
Contour 30i features a 1.1" Esotar 2i Soft-Dome Tweeter and 2 x 7" MSP Woofer with a Crossover frequency at (300)/2200 Hz. On the other hand, the Contour 25Ci features a 1.1" Esotar 2i Soft-Dome Tweeter and 2 x 7" MSP Woofer with a Crossover frequency at (300)/2200 Hz.
Frequency Response
Contour 30i has a frequency range of 32-23k Hz whereas Contour 25Ci has a frequency range of 35-23k Hz. With a minimum frequency of 32Hz, the Contour 30i can go slightly deeper then the Contour 25Ci's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Contour 30i and Contour 25Ci have the same Impedance of 4 ohms and their sensitivity is also same at 87 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Contour 30i and the Contour 30i can provide this impedance level.
Sensitivity
Floor-standing Speakers
Input Type and Bi-Amping / Bi-Wiring
Contour 30i features Binding post type posts and Contour 25Ci has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Contour 30i and Contour 25Ci have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Contour 30i's and Dynaudio Contour 25Ci's external dimensions. Dynaudio Contour 30i has external dimensions of 1140.0 x 215.0 x 360.0mm ( 44-7/8 x 8-7/16 x 14-3/16inch) whereas Dynaudio Contour 25Ci has external dimensions of 215.0 x 750.0 x 396.0mm ( 8-7/16 x 29-1/2 x 15-9/16inch) .
Dynaudio Contour 30i is 535mm narrower and 36mm less deeper than Dynaudio Contour 25Ci but it is also 925mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Contour 30i is approximately 774.0cm2 / 120.0inch2 and base area of the Dynaudio Contour 25Ci is approximately 2970.0cm2 / 460.4inch2. The Contour 30i requires 74% less surface area than the Contour 25Ci which gives it a small advantage on placement in tight spaces.