In this review, we will be comparing two different type of speakers by Dynaudio. Dynaudio Contour 20i is a Bookshelf speaker whereas the Contour 60i is a Floor-standing speaker.
Let's have a brief look at the main features
of Dynaudio Contour 20i and Dynaudio Contour 60i first before getting into our more
detailed comparison.
Dynaudio Contour 20i Key Specs
- 2-way Design
- 1.1" Soft-Dome Tweeter
- 7" MSP Woofer
- 39-23k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Weight:14.00kg
- Dimensions (H x W x D): 17-5/16" x 8-7/16" x 14-3/16" ( 440.0 x 215.0 x 360.0mm )
Dynaudio Contour 60i Key Specs
- 3-way Design
- 1.1" Soft-Dome Tweeter
- 6" Midrange
- 2 x 9" MSP Woofer
- 6" Midrange
- 28-23k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Weight:50.00kg
- Dimensions (H x W x D): 52-3/8" x 10-1/16" x 16-9/16" ( 1330.0 x 255.0 x 420.0mm )
Contour 20i and Contour 60i are members of Dynaudio's Contour i series of speakers. Below you can find the loudspeakers from this series.
Dynaudio Contour i Series
History
What size room are the Dynaudio Contour 20i and Dynaudio Contour 60i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Dynaudio Contour 20i |
Dynaudio Contour 60i |
| Near-field |
Good |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Good |
| Very Large Room |
No way |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Dynaudio Contour 20i and Dynaudio Contour 60i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Contour 20i is a 2-way design whereas the Contour 60i is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Dynaudio Contour 20i |
Dynaudio Contour 60i |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
1 x 6-inch |
|
Woofer
|
1 x 7-inch
|
2 x 9-inch
|
Contour 20i features a 1.1" Esotar 2i Soft-Dome Tweeter and 1 x 7" MSP Woofer with a Crossover frequency at 2200 Hz. On the other hand, the Contour 60i features a 1.1" Esotar 2i Soft-Dome Tweeter , a 6" Midrange and 2 x 9" MSP Woofer with a Crossover frequency at 220 Hz / 4.500 Hz.
Frequency Response
Contour 20i has a frequency range of 39-23k Hz whereas Contour 60i has a frequency range of 28-23k Hz. With a minimum frequency of 28Hz, the Contour 60i can go significantly deeper on the low side and provide stronger bass compared to the Contour 20i's min frequency of 39Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Contour 20i and Contour 60i have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Contour 20i sensitivity is rated at 86 dB and the Contour 60i's is at 88 dB. This 2 dB difference makes the Dynaudio Contour 60i a more sensitive speaker compared to Dynaudio Contour 20i, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Contour 20i and the Contour 20i can provide this impedance level.
Sensitivity
Bookshelf Speakers
Input Type and Bi-Amping / Bi-Wiring
Contour 20i features Binding post type posts and Contour 60i has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Contour 20i and Contour 60i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Contour 20i's and Dynaudio Contour 60i's external dimensions. Dynaudio Contour 20i has external dimensions of 440.0 x 215.0 x 360.0mm ( 17-5/16 x 8-7/16 x 14-3/16inch) whereas Dynaudio Contour 60i has external dimensions of 1330.0 x 255.0 x 420.0mm ( 52-3/8 x 10-1/16 x 16-9/16inch) .
Dynaudio Contour 60i is clearly the larger of the two speakers. Its body is 40mm wider, 890mm taller and 60mm deeper than Dynaudio Contour 20i.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Contour 20i is approximately 774.0cm2 / 120.0inch2 and base area of the Dynaudio Contour 60i is approximately 1071.0cm2 / 166.0inch2. The Contour 20i requires 28% less surface area than the Contour 60i which gives it a small advantage on placement in tight spaces.