In this review, we will be comparing Dymension DM70 and BP-9060, two Passive Floor-standing speakers by Definitive Technology Let's have a brief look at the main features
of Definitive Dymension DM70 and Definitive BP-9060 first before getting into our more
detailed comparison.
What size room are the Definitive Dymension DM70 and Definitive BP-9060 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM70 and Definitive BP-9060 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Dymension DM70 and BP-9060 are 3-way speakers.
| Driver |
Definitive Dymension DM70 |
Definitive BP-9060 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
4 x 5.25-inch |
3 x 4.5-inch |
|
Woofer
|
1 x 10-inch
|
1 x 10-inch
|
Dymension DM70 features a 1" aluminum oxide 2 x Hard-Dome Tweeter , a 5.25" Midrange and 1 x 10" Polypropelene Woofer . On the other hand, the BP-9060 features a 1" annealed aluminum dome Tweeter , a 4.5" Midrange and 1 x 10" Polypropelene Woofer .
Frequency Response
Dymension DM70 has a frequency range of 30-23 kHz whereas BP-9060 has a frequency range of 18-49k Hz. With a minimum frequency of 18Hz, the BP-9060 can go significantly deeper on the low side and provide stronger bass compared to the Dymension DM70's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Definitive Dymension DM70
Impedance and Sensitivity
Dymension DM70 is a 4 ohms speaker compared to the BP-9060 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Dymension DM70 can provide this impedance level.
These two speakers also have different sensitivity levels. Dymension DM70 sensitivity is rated at 90 dB and the BP-9060's is rated at 92 dB. This 2 dB difference makes the Definitive BP-9060 a more sensitive speaker compared to Definitive Dymension DM70, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Dymension DM70 and BP-9060 has the same power range of 50-300 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Dymension DM70 features 5-Way post, RCA type posts and BP-9060 has a 5-Way post, RCA type posts. None of these speakers feature bi-amping/bi-wiring.
Definitive Dymension DM70's Binding post terminals
Definitive BP-9060's 5-Way post, RCA terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM70's and Definitive BP-9060's external dimensions. Definitive Dymension DM70 has external dimensions of 1204 x 287 x 407 mm ( 47.4 x 11.3 x 16.0 in) whereas Definitive BP-9060 has external dimensions of 1132.0 x 281.0 x 351.0mm ( 44-9/16 x 11-1/16 x 13-13/16inch) .
Definitive Dymension DM70 is clearly the larger of the two speakers. Its body is 6mm wider, 72mm taller and 56mm deeper than Definitive BP-9060.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM70 is approximately 1168.1cm2 / 181.1inch2 and base area of the Definitive BP-9060 is approximately 986.3cm2 / 152.9inch2. The Dymension DM70 requires 18% more surface area than the BP-9060 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Dymension DM70 weighs 33.60kg / 73.9lbs and the Definitive BP-9060 weighs 22.73kg / 50lbs. This makes the Dymension DM70 48% heavier than the BP-9060.
Here is a comparison of how Dymension DM70 and BP-9060's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Definitive Dymension DM70
What's in the Box of Definitive Dymension DM70?
Here are the items that are included inside the box of Dymension DM70:
4 Adjustable hard floor glides 4 Adjustable carpet spikes
What's in the Box of Definitive BP-9060?
Here are the items that come with the BP-9060:
Tower loudspeaker6.5-feet AC power cordTop-plate (installed)Stabilizer base4 Floor guides4 Carpet spikes4 Screws4 NutsOwners ManualWhat Obsession Sounds Like card
 Passive Radiator |
2 x 10-inch
vs
None
|
Increases the bass performance |
 Sensitivity |
92 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
18 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
49k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
1132mm
vs
1204mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
986cm2 (281x351mm)
vs
1168cm2 (287x407mm)
|
Takes less floor space |
 Price per pair* |
2398USD
vs
3998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Definitive Technology Dymension DM70 |
Definitive Technology BP-9060 |
| Brand |
Definitive Technology |
Definitive Technology |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
50-300 watts |
| Sensitivity |
90 dB |
92 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
30-23 kHz |
18-49k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Polypropelene |
Polypropelene |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
2 x Hard-Dome |
dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
4.5" |
Physical Specs |
|
|
| Height |
1204.0mm (47.4") |
1132.0mm (44.6") |
| Width |
287.0mm (11.3") |
281.0mm (11.1") |
| Depth |
407.0mm (16") |
351.0mm (13.8") |
| Weight |
33.60kg (73.9lbs) |
22.73kg (50lbs) |
| Enclosure |
Passive Radiator |
Passive Radiator |
| Finish |
n/a |
MDF/Aluminum/Cloth |
| Available Colors |
Black |
Black |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |